ClosetMaid 16" Organizer + 2 Drawer Installation guide

SuiteSymphony Combo Kits

Installation Tips

Kit G

1952040

04/18

Tools you will need for assembly:

.50 in.

.25 in.

Getting Started

General Tips

• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonrequired

& recommended tools for the assembly of the products.

• Take an inventory of the parts for the products purchased to insure you have everything you need

for the installation.

• Pre-plan the placement of the towers.

Parts List

1 - 16 In. Starter Kit

• Assemble and build your towers.

• Placeyourtowers,makingsuretoaxthemtothewallasdirected.

• Measure the length that the rods will need to be for each side. Make sure the span between units

orunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaximumspaceof

48 in.

• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therodwill

need to be cut.

• Install the closet rods and top shelves.

• Assemble and install any drawers into the tower unit (sold separately).

3 - Top Shelf Support Kit

3 - 48 In. Top Shelf

2-16In.Wx10In.DDrawer

This manual is also suitable for

Download PDF