Faucet Installation
1
2
Tools might be applied to the following places:
Installation size map
Position the body with o-ring on the installation
surface as shown, secure it with gasket
assembly and tighten the lock nut with adjustable
wrench.
Position the handle on installation
surface as shown and secure it with
fixing kit and tighten the screw with
screwdriver. Repeat the above steps
for the other handle.
Caution: please be careful with the
position of hot and cold handles.
3.5 in.
(8.9 cm)
2.1 in. (5.5 cm)
Ø 1.1 in.
(3 cm)
1/2-14NPSM
6.75 in.
(17.2 cm)
8 - 12 in. (20.3 - 30.5 cm)
6.5 in. (16.6 cm)
4.9 in. (12.6 cm)
4.3 in.
(11.1 cm)
4.4 in. (11.3 cm)
3.3 in. (8.5 cm)
2.1 in. (5.5 cm)
Ø 1.1 in.
(3 cm)
Ø 1.1 in.
(3 cm)
1.1 in.
(3 cm)
Ø 1.1 in.
(3 cm)
/
