Submitted Model No.:
▲
Designate proper nish sufx
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book
or www.deltafaucet.com for nish options and product availability.
DSP-L-25748LF-PD Rev. A
BATHROOM FAUCET
STANDARD SPECIFICATIONS:
Specific Features:
9 7/8"
(251 mm)
4 1/2"
(115 mm)
1 11/16"
(43 mm)
Max. Deck
Thickness
4"
(102 mm)
Centers
6 5/16"
(160 mm)
5 13/16"
(148 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
2 3/16"
( 56 mm)
2 5/16"
(59 mm)
1/2"-14 NPSM
WARRANTY
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
Indicates compliance to
ICC / ANSI A117.1
• EPA WaterSense
®
5 1/4"
(133 mm)
8 1/16"
(205 mm)
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, Ontario Canada N5P 4L1
© 2019 Delta Faucet Company
Delta Faucet Company
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and 5
years for all other commercial uses, in each case
from the date of purchase.
• Electronic Parts and Batteries (if applicable) - 5 years
from the date of purchase; or for commercial purchasers,
1 year from the date of purchase. No warranty is provided
on batteries.
2 1/4"
(56 mm)
Dia.
1 5/8" (42 mm)
to
2 3/8" (61 mm)
8 3/4"
(221 mm)
1 1/4"
(32 mm)
Dia.
• Maximum low rate 1.2 gpm @ 60 psi, 4.5 L/min @ 414 kPa
• Three hole mount
• Hot and cold stems are interchangeable
• All operating parts are replaceable from the top
• 1/4 turn handle stops
• 1/2"-14 NPSM threaded male inlet shanks
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotation, with replaceable
non-metallic seats
• Dual integral check valves in sprayer
• Model have push pop-up with over low
3 X 1 1/8"~
1 1/2"
(29~38 mm)
Hole Size
■
Sandover™ Collection
■
Two Handle Deck Mount Pull-Down
25748LF
▲
-PD
/