Moen TS2711 Specification

Category
Sanitary ware
Type
Specification

This manual is also suitable for

CRITICAL DIMENSIONS
(DO NOT SCALE)
TS2713sp: Rev. 1/11
THIN WALL APPLICATIONTHICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1-3/8"
(35mm)
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
6-3/16”
(157mm)
2-1/2”
(64mm)
6-7/16”
(164mm)
2-7/16”
(62mm)
7-1/4”
(185mm)
8-3/8”
(213mm)
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Includes showerhead, arm, flange and diverter spout
OPERATION
Lever style handle with temperature indicator on the escutcheon
Handle operates counterclockwise through a 270˚ arc with off at
6 oclock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
Adjustable temperature limit stop to control maximum hot water
temperature
Pressure balancing mechanism maintains selected discharge
temperature to ± 3.6° F (±2˚ C)
FLOW
Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
NH suffix models contain no showerhead
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
90 DEGREE ™ POSI-TEMP
®
Single-Handle Tub/Shower Trim Kit
Model: TS2711 series - valve trim only
TS2712 series - shower trim only
TS2713 series - tub/shower trim only
Valves: 62300, 2500 series
Spec i fi ca tions
EP Suffix Models Only
  • Page 1 1

Moen TS2711 Specification

Category
Sanitary ware
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI