2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Moen
  6. TS2711
TS2711

Moen TS2711, TS2712EP, TS2713, TS2713EPBN Specification

  • Hello! I am an AI chatbot trained to assist you with the Moen TS2711 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CRITICAL DIMENSIONS
(DO NOT SCALE)
TS2713sp: Rev. 1/11
THIN WALL APPLICATIONTHICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN
TUB RIM
6'-6"
(1981mm)
L
C
1-3/8" (35mm)
2-1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1-3/8"
(35mm)
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
6-3/16”
(157mm)
2-1/2”
(64mm)
6-7/16”
(164mm)
2-7/16”
(62mm)
7-1/4”
(185mm)
8-3/8”
(213mm)
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Lever style handle with temperature indicator on the escutcheon
• Handle operates counterclockwise through a 270˚ arc with off at
6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3.6° F (±2˚ C)
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
90 DEGREE ™ POSI-TEMP
®
Single-Handle Tub/Shower Trim Kit
Model: TS2711 series - valve trim only
TS2712 series - shower trim only
TS2713 series - tub/shower trim only
Valves: 62300, 2500 series
Spec i fi ca tions
EP Suffix Models Only
/