Hydro Systems CLAC6030AWPW Specification

Type
Specification

This manual is also suitable for

LACEY 6030
DESIGNER COLLECTION
PVC SyStemS InClude:
6 Fully directional adjustable flow
PVC jets
Anti-vortex safety suction
Color matched system trim
HydroOzone ozone sanitation system
Rigid PVC piping
Self draining pump and system
Soft Touch electronic on/off control
with 30-minute integral times
2.25 HP single speed pump
Cable waste and overflow
OPtIOnS: (mOre InfOrmatIOn aVaIlable On Our webSIte)
Additional Jets
- Directional or Swirling
Back Masseuse Systems
Chromatherapy-LED Lighting System
Custom Jet and Pump Location
Electronic Low Water Protection
Extra High Density
Grab Bars
- Colonial or Universal
Hydro Coat
Hydro Express Quick Ship
Hydro Fusion
Hydro Indulge
HydrOzone UV System
In-line Heater
Integral Waste and Overflow
- Circular or Linear
Jumbo Jets
- Directional or Rotating
Micro Mount
Micro Therapy Jets
Molded Armrests
Neck Masseuse Pillow
Skirt (adds approx. 2” to overall height)
Tile Flanges
Standard eleCtrICal requIrementS:
Whirlpool System | One 20 Amp Dedicated Circuit
Thermal Air System | One 15 Amp Dedicated Circuit
Combo System | One 15 Amp Dedicated Circuit and One 20 Amp Dedicated Circuit
Indulge System | One 15 Amp Dedicated Circuit
Hydro Fusion (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
Inline Heater (600 or 1500 Watts) | One 15 Amp Dedicated Circuit
*All electrical components come standard at 115 volts*
*All electrical circuits must be GFCI protected*
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
Page 1 of 2
Colonial Grab Bar
Linear Integral Waste and Overow
Chromatherapy-LED Lighting System
LACEY 6030
DESIGNER COLLECTION
aCrylIC tub
Acrylic models finished in 1/8” thick layer of deep lustrous acrylic
Pre-wired pump on pump platform (standard pump location only)
Integral E-Z level platform facilitates installation
Micro mount reduces standard edge height of tub to minus (-) 3/8 to 5/8”
Micro mount requires increase in framing height by approximately 1-1/4”
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
aS ShOwn:
Whirlpool option
featureS ShOwn:
Overflow location
Standard jet location
alSO aVaIlable:
Soaking tub only
Thermal Air
Combo
SIze:
60.30.20
baCkSlOPe:
28 degrees
water CaPaCIty:
50 Gallons
weIght:
55 - 95 pounds depending on system
drOP-In CutOut InStall dImenSIOnS:
(L)ength - 58”
(W)idth - 28”
Finished Height - 19-1/4”
3-wall InStall dImenSIOnS:
(L)ength - 60”
(W)idth - 30”
Top of Ledger - 20-3/4”
(when adding integral linear option)
add 1” to overall height of tub
add 1” to ledger height
p-trap location now below waste
9
42 4
60 30
28°
2.75
17.5
Pump
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax 661.775.0668, www.hydrosystem.com
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
Title: Lacey 6030
Date:
Scale:
Material:
February 7, 2018
None
Rev:
Date:
Acrylic and Fiberglass, ¼" nominal thickness
15
3
20
18
1.75
*Tub must be set in mortar base*
  • Page 1 1
  • Page 2 2

Hydro Systems CLAC6030AWPW Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI