Vizio L37 User manual

Category
LCD TVs
Type
User manual
WWWVIZIOCECOM
,)15)$#2934!,($46
,($46
WWW6):)/#%COM
Version- 02/27/06
3
VIZIO L37 HDTV User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO L37 High
Definition LCD Television purchase. Thank you for your
support. For maximum benefit of your set, please read
these instructions before making any adjustments, and
retain them for future reference. We hope you will
experience years of enjoyment from your new VIZIO
L37 High Definition Television.
For assistance, please call 714-668-0588 or email
us at techsupport@vinc.com.
To purchase or inquire about accessories and instal-
lation services for your VIZIO LCD TV, please visit
our website at www.vizioce.com or call toll free at
1-888-VIZIOCE (1-888-849-4623).
We recommend you register your VIZIO L37 HDTV
either at our website www.vizioce.com or fill in your
registration card and mail it in. For peace of mind and
to protect your investment beyond the standard war-
ranty, VIZIO offers on-site extended warranty service
plans. These plans give you additional coverage during
the standard warranty period. Visit our website or call
us to purchase a plan.
Write down your Serial Number located on the back
of your L37.
Purchase Date _________________
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
A H L
WWW6):)/#%COM
Version- 02/27/06
4
VIZIO L37 HDTV User Manual
This product is designed and manufactured to operate within defined design limits, and misuse may
result in electric shock or fire. To prevent the product from being damaged, the following rules should be
observed for the installation, use and maintenance of the product. Read the following safety instructions
before operating the display. Keep these instructions in a safe place for future reference.
• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the LCD TV.
Unplug the power cord before cleaning the LCD TV. A damp cloth is sufficient for cleaning the LCD TV. Do not use a liquid or a spray cleaner
for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by VIZIO to insure compatibility.
When moving the LCD TV from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not
turn on the LCD TV immediately after this to avoid causing fire, electric shock or component damage.
Do not place the LCD TV on an unstable cart, stand, or table. If the LCD TV falls, it can injure a person and cause serious damage to the
appliance.
A distance of at least 3 feet should be maintained between the LCD TV and any heat source, i.e. radiator, heater, oven, amplifier etc. Do not
install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the LCD TV and
to protect it from overheating, be sure these openings are not blocked or covered. Do not place the LCD TV in a bookcase or cabinet unless
proper ventilation is provided.
Never push any object into the slot on the LCD TV cabinet. Do not place any objects on the top of the product. It could short circuit parts
causing a fire or electric shock. Never spill liquids on the LCD TV.
• The LCD TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to
your home, consult your local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact VIZIO.
• The LCD TV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an
adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be installed near the equipment and should be easily accessible.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the LCD TV from damage due
to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of
electric shock, and other hazards. If repair is required, please contact VIZIO and refer all servicing to qualified service personnel.
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the
power cord and contact VIZIO. Continuous use in this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact VIZIO
immediately. Do not try to repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function
abnormally. Unplug the power cord immediately and contact VIZIO for repair. Continued use of the product may cause fire or electric
shock.
Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high
humidity may cause fire or electric shock.
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause
fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
• To avoid risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the
batteries, operator injury and contamination of the remote control.
If any of the following occurs, please contact VIZIO:
º The power connector fails or frays.
º Liquid sprays or any object drops into the LCD TV.
º The Display is exposed to rain or other moisture.
º The Display is dropped or damaged in any way.
º The performance of the Display changes substantially.
Operating environment: Temperature: 40°F ~ 95°F, Humidity: 10% to 90% non-condensing, Altitude: 0~10,000 ft.
THIS PRODUCT HAS BEEN TESTED AND FOUND TO COMPLY WITH REGULATORY SAFETY CERTIFICATIONS.
WWW6):)/#%COM
Version- 02/27/06
5
VIZIO L37 HDTV User Manual
Note: In some countries or regions, the shape of the power plug and power outlet may sometimes differ
from that shown in the explanatory drawings. However, the method of connecting and operating the unit
is the same.
4ELEVISION!NTENNA#ONNECTION0ROTECTION
%XTERNAL4ELEVISION!NTENNA'ROUNDING
If an outside antenna/satellite or cable system is to be connected to the LCD TV, make sure that the
antenna/satellite or cable system is electrically grounded to provide some protection against voltage surges
and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes,
and requirements of the grounding electrode.
,IGHTNING0ROTECTION
For added protection of your LCD TV during a lightning storm or when it is left unattended or unused for
long periods of time, unplug the LCD TV from the wall outlet and disconnect the antenna/satellite or cable
system.
0OWER,INES
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines
or circuits.
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
GROUND CLAMPS
ANTENNA LEAD-IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
WWW6):)/#%COM
Version- 02/27/06
6
VIZIO L37 HDTV User Manual
/PENINGTHE0ACKAGE
Your VIZIO L37 HDTV is packaged in a carton together with other standard accessories. Any optional
accessories would be packed separately in another carton.
The weight of the LCD display is approximately 55 lbs. Due to the size and weight of the product, it is
suggested that it be handled by a minimum of 2 persons.
Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on
a surface with the glass facing downwards unless it is on protective padding.
When opening the carton, check that the product is in good condition and that all standard accessories and
items are included.
IMPORTANT: Save the original box and all the packing material for future shipping needs.

0ACKAGE#ONTENTS
VIZIO L37 HDTV
VIZIO Remote Control by Universal Electronics
Audio Video Cable (yellow, red and white connectors)
Power Cord
This User Guide
Quick Setup Guide
Registration Card
VIP Services Brochure
Note: Optional components sold separately.
WWW6):)/#%COM
Version- 02/27/06
7
VIZIO L37 HDTV User Manual
!DDITIONAL6):)/#ERTI¬ED!CCESSORIESFORTHE6):)/,
($46ARESOLDSEPARATELY
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO L37 HDTV.
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site
at www.vizioce.com or call us toll free at 1-888-VIZIOCE (1-888-849-4623).
)NSTALLATION0REPARATION
Please read the user manual carefully before performing the installation.
The power consumption of the display is approximately 160 watts, please use the power cord designated for
the product. When an extension cord is required, use one with the correct power rating. The cord must be
grounded and the grounding feature must not be defeated.
The product should be installed on a flat surface to avoid tipping. Space should be maintained between
the back of the product and the wall for proper ventilation. If you would like to mount the TV to the wall,
please see “Preparing the LCD for Wall Mounting” below for additional information. Avoid
installing the product in the kitchen, bathroom or other places with high humidity, dust or smoke, so as not
to shorten the service life of the electronic components.
Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 1-888-VIZIOCE (1-888-849-4623) or www.vizioce.com.
0REPARING9OUR,#$46FOR7ALL-OUNTING
The VIZIO L37 HDTV can either be kept on the stand base or mounted to the wall for viewing. If you
choose to mount the L37 HDTV to the wall, please follow the instructions below for removing the base
stand.
WWW6):)/#%COM
Version- 02/27/06
8
VIZIO L37 HDTV User Manual
4OREMOVETHESTANDBASE
1. Unplug all the cables and cords from your LCD TV.
2. Place the LCD TV face down on a soft and flat surface (blanket, foam,
cloth, etc) to prevent any damage to the display.
3. Remove the 6 screws on the back panel of the TV located near the bottom
so that the base stand can be removed. (see Figure 3.3a)
4. Gently pull the stand away from the display by grasping firmly to the base.
5. Now the display can fit securely to a mount (sold separately) by utilizing the
mounting holes in the center of the back panel of the display (see Figure
3.3b). Please make sure to read the directions of your specific wall mount to
properly hang the L37 HDTV. Make sure the wall mount is rated to support
at least 65 lbs.
To find the perfect mount for the VIZIO L37 HDTV,
browse VIZIO’s certified mount selection at www.vizioce.com
or call directly, 1-888-VIZIOCE (1-888-849-4623).
Figure 3.3b
Figure 3.3a
WWW6):)/#%COM
Version- 02/27/06
9
VIZIO L37 HDTV User Manual
#HAPTER"ASIC#ONTROLSAND#ONNECTIONS
1.1 Front Panel Controls 10
1.2 Side Panel Controls 10
1.3 Rear Panel Connections 11
1.4 VIZIO Universal Remote Control 12
1.4.1 – Insertion of Batteries in the Remote Control 15
1.4.2 Remote Control Range 15
1.4.3 – Precautions for the VIZIO Universal Remote Control 15
#HAPTER#ONNECTING%QUIPMENT
2.1 – Which Video Connection Should I Use? 16
2.2 Connecting your DVD Player 17
2.2.1 Using HDMI (Digital HD) 17
2.2.2 Using Component (Analog HD1) Video 19
2.2.3 Using S-Video (AV3) 20
2.2.4 Using Composite (AV) Video 21
2.3 Connecting Your HDTV Set-Top Box 22
2.3.1 Using HDMI (Digital HD) 22
2.3.2 Using RGB Video 24
2.4 Connecting Your VCR or Video Camera 25
2.5 Connecting Coaxial (RF) 26
2.5.1 – Using Your Antenna or Digital Cable for DTV 26
2.5.2 Using Your Antenna or Cable TV 27
2.5.3 Using the Antenna through Your VCR 27
2.6 – Connecting an Amplifier or Speakers 28
2.7 Connecting a Computer 29
#HAPTER3ETTING5PTO7ATCH46AND$46
3.1 Basic LCD TV Start Up 30
3.2 Watching a TV Program 32
3.3 Adjusting Basic LCD TV Settings 32
3.4 DTV Tuner Set Up 33
3.4.1 Parental Controls for DTV 40
3.4.2 DTV Channel Information 42
3.4.3 Program Information 43
3.4.4 Setting a Password 44
3.5 – Using the On Screen Display (OSD) 45
3.5.1 OSD Menu Operations 45
3.5.2 Picture Adjust 46
3.5.3 Picture 46
3.5.4 Temperature 47
3.5.5 Audio Adjust 47
3.5.6 TV Tuner Set Up for NTSC TV 47
3.5.7 Parental Controls for TV 48
3.5.8 PIP/POP Set Up 48
3.5.9 Special Features 48
3.5.10 Understanding Viewing Features 49
3.5.11 Viewing Modes 49
3.5.12 – Picture in Picture (PIP)/Picture by Picture (POP) Mode 50
3.5.13 Adjust Basic PIP/POP Settings 50
3.5.14 Using the Parental Controls 51
3.5.15 Setting the Sleep Timer 52
3.6 – Programming the VIZIO Universal Remote Control 53
3.6.1 Programming for VCR 53
3.6.2 Programming for Cable Box 54
3.6.3 Programming for DVD Player 54
3.6.4 Searching for Component Codes 55
3.7 – Using a Cable Box or Satellite Box Remote 55
#HAPTER-AINTENANCEAND4ROUBLESHOOTING
4.1 Maintenance 56
4.2 Troubleshooting Guide 56
4.3 Telephone and Technical Support 58
4.4 Compliance 59
4.5 – FCC Class B Radio Frequency Interference Statement 59
3PECI¬CATIONS 60
'LOSSARY3TANDARD$E¬NITIONS 61
)NDEX 62
!PPENDIX!,IMITED0RODUCT7ARRANTY 64
!PPENDIX"#OMPONENT0ROGRAM#ODES 65
4ABLE/F#ONTENTS 
0AGE
WWW6):)/#%COM
Version- 02/27/06
10
VIZIO L37 HDTV User Manual
#HAPTER"ASIC#ONTROLSAND#ONNECTIONS


&RONT0ANEL#ONTROLS
1. OSD (On-Screen Display) – This button opens the TV OSD menu.
2. Mute/Exit – This button allows the user to turn off the sound on the LCD TV. Additionally, it functions as
the exit button for the OSD menu.
3. Volume (-/+) -- These buttons increase or decrease volume. When the OSD is active, these buttons adjust
the OSD options.
4. Channel (-/+) – These buttons increase or decrease the channels. When the OSD is active, these buttons
are used to select OSD options.
5. Input – This button switches between the available input sources in the following sequence: AV1 and AV2
(Video), AV3 (side panel connections – S-Video and Video), Analog HD1 and Analog HD2 (Y-Pb/Cb-Pr/
Cr), Digital HD (HDMI), RGB, TV and DTV (Digital TV and ATSC HDTV). Press the button repeatedly
to cycle through the available options.
6. Power Button - Switch the LCD TV on by pressing the button once. Press the button again to turn the
LCD TV off.
7. Remote Control Sensor – This is the window that passes all of the remote control signals to the TV.
Point the remote control directly at this window for the best response to the remote signal.
8. Power Indicator Light - If the light is solid yellow, then your LCD TV is turned off. If the light is
solid green, then your LCD TV is turned on. If the light is not lit, there is no AC power
detected and the power cord may not be connected properly. When turning the LCD TV on or off, wait
three seconds before pressing the power button again.
3IDE0ANEL#ONTROLS
1. Head Phone Jack - Connect external headphones (not included) to this port. Note: if headphones
are connected, the speakers will be disconnected.
2. Composite Video (V3) - Connect a source for composite devices, such as a VCR or video games.
Use the white (L3) and red (R3) connectors to connect the external audio from the same source.
3. S-Video (AV3) - Connect the primary source for S-Video devices, such as a VCR or video games.
Use the white (L3) and red (R3) connectors to connect the external audio from the same source.
21 3 4 5 6 7
8
WWW6):)/#%COM
Version- 02/27/06
11
VIZIO L37 HDTV User Manual
2EAR0ANEL#ONNECTIONS
1. ServiceThis custom communication port is for factory service only.
2. AC IN – Plug-in the supplied AC Power Cord here.
3. DIGITAL HD (HDMI) - Connect a DVD multimedia player, or set-top box and the audio through
this connection. The white color band on the back of the display indicates this connection. For users
who want to connect a DVI enabled device, use an HDMI-DVI cable (available for purchase from www.
vizioce.com or by calling 1-888-VIZIOCE [1-888-849-4623]) and use the Analog Audio output of the
device connected to the L+R Audio here.
4. RGB (Analog RGB/Audio In) - Connect the video and the audio from a computer or set-top box here.
The purple color band on the back of the display indicates this connection.
5. COMPONENT ANALOG HD1 (Component Y-Pb/Cb-Pr/Cr with Audio L/R) - Connect the primary
source for component video, such as a DVD player or set-top box here. From left to right, use the
green for Y, blue for Pub (or Cob), red for Pr (or Cr), white for left audio and red for right audio inputs.
The green color band on the back of the display indicates this connection.
6. COMPONENT ANALOG HD2 (Component Y-Pb/Cb-Pr/Cr with Audio L/R) - Connect the secondary
source for component video, such as a DVD player or set-top box here. From left to right, use the green
for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The
blue color band on the back of the display indicates this connection.
7. AV1 In – Connect the primary source for composite devices, such as a VCR or video game. Use the
white and red connectors to connect the external audio from the same source. The yellow color band on
the back of the display indicates this connection.
8. AV2 In – Connect the secondary source for composite devices, such as a VCR or video game. Use the
white and red connectors to connect the external audio from the same source. The orange color band on
the back of the display indicates this connection.
9. Audio Out - Connect the audio from the LCD TV to an external device, such as an external amplifier or
stereo. Speakers cannot be connected directly to here.
10. TV - Connect to an antenna, or cable service for standard NTSC service.
11. DTV – Connect to an antenna or digital cable for Digital TV.*
12. DIGITAL AUDIO OUTWhen the DTV input is selected for viewing, the digital audio associated with
Digital programming will be available on this output for connection to your home theatre system.
* For digital TV stations in your area visit www.antennaweb.org.
HDMI logo and “High-Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
13
2
45 79
6 12 8 11 10
WWW6):)/#%COM
Version- 02/27/06
12
VIZIO L37 HDTV User Manual
6):)/5NIVERSAL2EMOTE#ONTROL
The VIZIO Remote is a comprehensive remote that can be use
d
to control up to four
d
ifferent co
m
ponen
t
s.
The remote control button functions are explaine
d
on the following pages
.
VIZI
O
Remote Contro
l
Button Descriptio
n
E
T – This
b
utton starts all programming sequences
.
R
emote
L
E
D
B
links when the remote is
b
ein
g
programme
d
or is sen
d
ing a signal to your TV
.
• P
OW
E
R – Press this key to turn the TV on from stan
d
by
mo
d
e. Press it again to return to the stan
d
by mo
d
e
.
TV – This button selects a programme
d
TV. Note: this
button has been pre-programme
d
for the VIZIO
L
3
7
HDTV.
VCR – This button selects a programme
d
VCR
.
CA
B
L
E
This button selects a programme
d
cable TV set
-
top box or selects a programme
d
satellite TV set-top box
.
• DVD – This button selects a programme
d
DVD player
.
• Num
b
er
B
utton Pa
d
– Use these buttons to select
a
channel or enter a passwor
d.
• INPUT – This
b
utton allows the user to cycle through the
i
nput sources
.
E
NT
E
R – This
b
utton works as a Dot or Dash
b
utton in the
DTV mo
d
es. When selecting a
d
igital channel
d
irectly
use this button for the separation of main an
d
sub
-
channels. For example, channel 28.2 woul
d
be
2
-8
-
E
NT
E
R
-2
.
• CH (+ or -) – These
b
uttons change the channels up or
d
own
.
• LAST – This button recalls the previously viewe
d
channel
.
MUT
E
This button turns the soun
d
on an
d
off
.
VOL (+ or -) – These buttons turn volume up or
d
own
.
M
E
NU – This button is use
d
to turn the OSD on
.
• INFO – This button
d
isplays the image an
d
system infor
-
mation
d
isplay
.
G
UID
E
This button
d
isplays program information
.
Note: this
b
utton is only functional for DTV.
E
XIT – This
b
utton exits the OSD menus
.
These buttons navigate the On-Screen Display
(
OSD
)
menus
.
• OK – This
b
utton works to select your chosen option i
n
On-Screen Disp
l
ay (OSD) menus
.
WWW6):)/#%COM
Version- 02/27/06
13
VIZIO L37 HDTV User Manual
WID
E
/Recor
d
–This button cycles through stan
d
ar
d
an
d
wi
d
escreen viewing mo
d
es. Options inclu
d
e Normal, Wi
d
e
an
d
Zoom. Note: in R
GB
mo
d
e, the only option is Wi
d
e
.
This button also functions as a VCR Recor
d
when the
component is activate
d
with the remote control
.
SL
EE
P/Pause - This
b
utton allows the user to select the
sleep options by a
d
justing the timer in
3
0 m
i
nut
e
increments up to 120 minutes. A
dd
itionally, thi
s
b
utton pauses the CD, DVD or VCR when the component
is activate
d
with the remote control
.
• MTS/Play – This
b
utton will select the MTS options in
the NTSC TV mo
d
e. Options inclu
d
e: Stereo, SAP or
Mono. A
dd
itionally, this button plays the CD, DVD or
VCR when the component is activate
d
with the remote
contro
l.
• CC/Stop – This button will select the Close
d
Caption menu
in the TV mo
d
e. Options inclu
d
e the following: OFF, CC1,
CC
2,
CC
3
,
CC
4, TT1, TT2, T
T
3
or TT4. A
dd
itionally, this
b
utton stops the CD, DVD or VCR when the component is
activate
d
with the remote control
.
• NTSC TV/Skip Channel Reverse - This
b
utton selects
NT
SC
TV programming. Note: this
b
utton has
b
ee
n
pre-programme
d
for the VIZIO
L
3
7
HDTV
.
This
b
utton
also functions as a DVD s
k
ip channel reverse when the
DVD player is activate
d
with the remote control
.
• AV/Reverse – Repeate
d
pressing of this button will cycle
through AV1, AV2 an
d
A
V
3
inputs. A
dd
itionally, this
button rewin
d
s the CD, DVD or VCR when the component
is activate
d
with the remote control
.
• ANAL
O
G
HD/Forwar
d
– Repeate
d
pressing of this button
will switch between Component Analog HD1 an
d
Component Analog HD2 component inputs. A
dd
itionally,
this button forwar
d
s the CD
,
DVD or VCR when th
e
component is activate
d
with the remote control
.
DI
G
ITAL HD/Skip Channel Forwar
d
– Repeate
d
pressing
of this
b
utton will switch
b
etween the Digital HD input
an
d
DTV mo
d
e. A
dd
itionally, this button functions as a
DVD skip channel forwar
d
when the component i
s
activate
d
with the remote control
.
WWW6):)/#%COM
Version- 02/27/06
14
VIZIO L37 HDTV User Manual
• ZOOM (- an
d
+) – Use this key to zoom the image 2x or
shrink the image by one half. When in ZOOM mo
d
e
,
a 2x
or 1/2x will appear in t
h
e top rig
h
t area of t
h
e screen.
Use the arrow keys to move the zoome
d
portion. Press
the OK or Zoom (-) button to return to the stan
d
ar
d
p
i
cture
.
FR
EE
Z
E
– Press this key to “Freeze-Frame” the current
screen. Users may press this
k
ey again to continu
e
p
l
aying. Note: norma
l
viewing wi
ll
resume automatica
ll
y
a
f
ter one minute
.
R
GB
This button selects a connecte
d
R
GB
Ana
l
o
g
component suc
h
as a PC
.
• PIP – Use this
b
utton to activate the Picture-In-Picture
mo
d
e
.
• PIP CH (– an
d
+) – These buttons are use
d
to select the
c
h
annels wit
h
in t
h
e PIP screen w
h
en TV is t
h
e inpu
t
selecte
d
.
• AUDIO – Press this key to switch the au
d
io from the main
screen to the sub-screen while in PIP or POP mo
d
e
.
• PIP Input – Press this
b
utton to choose the PIP input
from t
h
e OSD menu. C
h
oose from one of t
h
e following:
A
V1,
A
V2,
AV
3
, Component Ana
l
og HD1, Component
Ana
l
og HD2, Digita
l
HD,
R
GB
, TV an
d
DTV.
Note: Users must be in PIP mode for this button to be
functional. For additional information regarding the PIP
opt
i
ons, see
3
.5.8 - Picture-in-Picture (PIP) Mo
d
e,
page
4
8
.
• PIP Size – Press this
b
utton to select the size of the PIP
screen from one of the following: small, me
d
ium or large
.
• L
AN
G
This
b
utton is not functional for the VIZIO
L
3
7
HDTV
.
• Swap – Use
d
to swap the inputs from the main screen an
d
the sub-screen while in the PIP mo
d
e
.
Note: The remote control layout is for reference only.
WWW6):)/#%COM
Version- 02/27/06
15
VIZIO L37 HDTV User Manual
21 3 4 5 6 7
8
)NSERTIONOF"ATTERIESINTHE2EMOTE#ONTROL
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
• Only use the specified AA batteries.
• Do not mix new and old batteries. This may result in
cracking or leakage that may pose a fire risk or lead to
personal injury.
• Inserting the batteries incorrectly may also result in
cracking or leakage that may pose a fire risk or lead to
personal injury.
• Dispose of the batteries in accordance with local laws and
regulations.
• Keep the batteries away from children and pets.
2EMOTE#ONTROL2ANGE
• Point the remote control at the remote control sensor to transmit the commands.
• Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 32 feet (10 meters) from the front of
the receiver window, 30º to the left and right, 20º up and down.
0RECAUTIONSFORTHE6):)/5NIVERSAL
2EMOTE#ONTROL
The remote control should be kept dry and away from heat sources. Avoid humidity.
• If the display responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
• Do not take apart the batteries, heat them, or throw them into a fire.
• Do not subject the remote control to undue physical stress, such as striking or dropping it.
• Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp
cloth.
WWW6):)/#%COM
Version- 02/27/06
16
VIZIO L37 HDTV User Manual
#HAPTER#ONNECTING%QUIPMENT
7HICH6IDEO#ONNECTION3HOULD)5SE
The VIZIO L37 HDTV has six different ways to connect your video equipment from a basic connection to
the most advanced for digital displays.
Note: For more info refer to the Quick Start Guide
#ONNECTION
1UALITY
TYPE
#ONNECTOR
#OLOR
#ODES
FOR
2EAR0ANEL
$ESCRIPTION
Analog HD1/HD2 (Component) - The video
signal is separated into three signals, one
containing the black-and-white information
and the other two containing the color
information.This enhancement over S-Video
takes advantage of the superior picture
provided by progressive scan DVD players and
HDTV formats.
Digital HD (HDMI - High-Definition Multime-
dia Interface) - It is the first and only
industry-supported, uncompressed, all-digital
audio/video interface. HDMI provides an
interface between any audio/video source, such
as a set-top box, DVD player, or A/V receiver
and an audio and/or video monitor, such as a
digital television (DTV), over a single cable.
Black
Green and
Blue
Better
(analog)
Best
(digital)
Best
(analog)
TV Coaxial RF. This is the connection for
standard NTSC TV using antenna or cable. If
you have a VCR, you can connect your
antenna/cable to the VCR RF Input and
connect the VCR RF Output to this connector.
S-Video (AV3) - The video signal is separated
into two signals, one containing the black-
and-white information and the other containing
the color information. Separating the color in
this way avoids ‘cross color’ effects where
closely spaced black and white lines are
erroneously displayed in color. It also enables
text to be displayed more sharply.
DTV Coaxial RF. When used for MPEG2
encoded bit streams from ATSC broadcast
programming, this input takes advantage of the
High Definition content.
AV1/AV2/AV3 (Composite) - The complete
video signal is carried through this single pin
connector. This is the most commonly used
video connection.
Analog RGB (VGA) - This video input has
seperate red, green and blue color components.
The signal carries horizontal and vertical sync
information on the green signal. This is most
commonly used for PC input
Black
Yellow and
Orange
Side Panel
Good
(analog)
Right
Good
(analog)
Good
(analog)
Black
Purple
Best
(digital)
Left
WWW6):)/#%COM
Version- 02/27/06
17
VIZIO L37 HDTV User Manual
#ONNECTING9OUR$6$0LAYER
You have several options for connecting your DVD player to your new L37 HDTV – HDMI (Digital HD),
Component (Analog HD), S-Video (AV), and Composite (AV) inputs. Based on your home theater configu-
ration, you can decide which option is the right one for you.
5SING($-)$IGITAL($
DVD players that have a digital interface such as HDMI (High-Definition Multimedia Interface) should be
connected to the HDMI input of the VIZIO L37 HDTV for optimal results.
#ONNECTING$6$0LAYER"EST
1. Turn off the power to the LCD TV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI input
(white color area) in the rear of your LCD TV.
3. Turn on the power to the LCD TV and your DVD player.
4. Select Digital HD using the INPUT button on the front of the LCD TV or directly by pressing the Digital
HD button on the Remote Control.
Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters or less.
See www.VIZIOCE.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Note: Refer to your DVD player user manual for more information about the video output requirements
of the product.
WWW6):)/#%COM
Version- 02/27/06
18
VIZIO L37 HDTV User Manual
&OR$6$0LAYERSWITH$6)
1. Turn off the power to the LCD TV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your DVD Player and the HDMI end to the HDMI
input (located in the white area) in the rear of your LCD TV.
3. Using an audio cable (white and red connectors), connect cable to the audio output connectors
associated with the DVI output on the rear of your DVD Player, and connect the other end to the audio
connectors (white area) associated with the HDMI input in the rear of your LCD TV.
4. Turn on the power to the LCD TV and your DVD Player.
5. Select digital HD using the input button on the front of the LCD TV or directly by pressing the digital HD
button on the remote control.
WWW6):)/#%COM
Version- 02/27/06
19
VIZIO L37 HDTV User Manual
5SING#OMPONENT!NALOG($6IDEO
#ONNECTING$6$0LAYER"ETTER
1. Turn off the power to the LCD TV and DVD player.
2. Using the connectors in the green color area, connect the Y (green color) connector on the rear of your
DVD player to the corresponding Y (green color) connector in the Component Analog HD1 group (green
color band) in the rear of your LCD TV.
3. Connect the Pb (blue color) connector on the rear of your DVD player to the corresponding Pb (blue
color) connector in Component Analog HD1 group (green color band) in the rear of your LCD TV.
4. Connect the Pr (red color) connector on the rear of your DVD player to the corresponding Pr (red color)
connector in the Component Analog HD1 group (green color band) in the rear of your LCD TV.
5. Connect the R (red color) and L (white color) audio connectors on the rear of your DVD player to the R
(red color) and L (white color) audio input connectors in the Component Analog HD1 group (green color
band) in the rear of your LCD TV.
6. Turn on the power to the LCD TV and DVD player.
7. Select Component Analog HD1 using the INPUT button on the remote or front of the LCD TV or directly
by pressing the Component Analog HD button on the Remote Control.
Note:
a) If you are already using the Component Analog HD1 input for another component, or you do not
want to use the Component Analog HD1 input for the DVD player, you can connect the DVD player
to the Component Analog HD2 connections coded by the blue color area.
b) Refer to your DVD player user manual for more information about the video output requirements
of the product.
WWW6):)/#%COM
Version- 02/27/06
20
VIZIO L37 HDTV User Manual
5SING36IDEO!6
#ONNECTING$6$0LAYER'OOD
1. Turn off the power to the LCD TV and DVD player.
2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV3 In group on the
side of your LCD TV.
3. Connect the R (red color) and L (white color) audio connectors on the rear of your DVD player to the R3
(red color) and L3 (white color) audio input connectors in the side of your LCD TV.
4. Turn on the power to the LCD TV and DVD player.
5. Select AV3 using the INPUT button on the remote or front of the LCD TV or directly by pressing the AV
button on the Remote Control three times.
Note: Refer to your DVD player user manual for more information about the video output requirements
of the product.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

Vizio L37 User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI