CyberData 011233 Product information

SIP Paging Adapter



Operations Guide

SIP Compliant

Part #011233

Document Part #930622E

for Firmware Version 6.1.0

CyberData Corporation

3 Justin Court

Monterey, CA 93940

(831) 373-2601

The IP Endpoint Company

CyberData Corporation 930622E Operations Guide

Operations Guide 930622E

SIP Compliant 011233

COPYRIGHT NOTICE:

This manual and related materials are the copyrighted property of CyberData Corporation. No part of

this manual or related materials may be reproduced or transmitted, in any form or by any means

(except for internal use by licensed customers), without prior express written permission of

CyberData Corporation. This manual, and the products, software, firmware, and/or hardware

described in this manual are the property of CyberData Corporation, provided under the terms of an

agreement between CyberData Corporation and recipient of this manual, and their use is subject to

that agreement and its terms.

DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by

CyberData Corporation, CyberData Corporation makes no representation or warranty, express or

implied, including any warranty or merchantability or fitness for any purpose, with respect to this

manual or the products, software, firmware, and/or hardware described herein, and CyberData

Corporation assumes no liability for damages or claims resulting from any use of this manual or such

products, software, firmware, and/or hardware. CyberData Corporation reserves the right to make

changes, without notice, to this manual and to any such product, software, firmware, and/or

hardware.

OPEN SOURCE STATEMENT: Certain software components included in CyberData products are

subject to the GNU General Public License (GPL) and Lesser GNU General Public License (LGPL)

“open source” or “free software” licenses. Some of this Open Source Software may be owned by third

parties. Open Source Software is not subject to the terms and conditions of the CyberData

COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and distribute any Open

Source Software is determined by the terms of the GPL, LGPL, or third party, according to who

licenses that software.

Software or firmware developed by Cyberdata that is unrelated to Open Source Software is

copyrighted by CyberData, subject to the terms of CyberData licenses, and may not be copied,

modified, reverse-engineered, or otherwise altered without explicit written permission from

CyberData Corporation.

TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are

trademarks of CyberData Corporation. Other product names, trademarks, and service marks may be

the trademarks or registered trademarks of their respective owners.

Technical Support 



The fastest way to get technical support for your VoIP product is to

submit a VoIP Technical Support form at the following website:

http://www.cyberdata.net/support/contactsupportvoip.php



Phone: (831) 373-2601, Ext. 333

Email: [email protected]

Fax: (831) 373-4193

Company and product information is at www.cyberdata.net.

The IP Endpoint Company

CyberData Corporation 930622E Operations Guide

Revision Information

Revision 930622E, which corresponds to firmware version 6.1.0, was released on November 12,

2013, and has the following changes:

• Updates Section 1.2, “Product features”.

• Adds Section 2.4.7, “Configure the Multicast Parameters”.

• Adds Section 2.6.1, “Command Interface Post Commands”.

• Updates the description of the Page Port Output setting in Ta bl e 1-1, "Product

Specifications" to “Balanced 600 Ohm 5VPP”.

• Updates the description in Section 2.3.1.2, “Pin 3, 4, and 5—Positive/Negative 600-Ohm

Audio Output/Audio Ground Reference” to the following:

“This output allows direct connection to paging amplifiers requiring a "Page Port" type input

that meets a balanced 600 Ohm 5VPP signal.”

CyberData Corporation 930622E Operations Guide

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(includin

g amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

tw

o blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles

, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

b

een damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

13. Prior to installation, consult local building and electrical code requirements.

GENERAL ALERT

Warning

Electrical Hazard: This product should be installed by a licensed electrician

according to all local electrical and building codes.

GENERAL ALERT

Warning

Electrical Hazard: To prevent injury, this apparatus must be securely attached to

the floor/wall in accordance with the installation instructions.

CyberData Corporation 930622E Operations Guide

Pictorial Alert Icons

GENERAL ALERT

General Alert

This pictoral alert indicates a potentially hazardous situation. This alert will be

followed by a hazar

d level heading and more specific information about the

hazard.

Ground

This pictoral alert indicates the Earth grounding connection point.

Hazard Levels

Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. This is limited to the most extreme situations.

Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or

ser

ious injury.

Caution: Indicates a potentially hazardous situation which, if not a

voided, could result in minor or

moderate injury. It may also alert users against unsafe practices.

Notice: Indicates a statement of company policy (tha

t is, a safety policy or protection of property).

The safety guidelines for the equipment in this manual do not purport to address all the safety issues

of t

he equipment. It is the responsibility of the user to establish appropriate safety, ergonomic, and

health practices and determine the applicability of regulatory limitations prior to use. Potential safety

hazards are identified in this manual through the use of words Danger, Warning, and Caution, the

specific hazard type, and pictorial alert icons.

Abbreviation or Term Definition

A-law A standard companding algorithm, used in European digital

communications systems to optimize, i.e., modify, the dynamic range of an

analog signal for digitizing.

AVP Audio Video Profile

Cat 5 TIA/EIA-568-B Ca

tegory 5

DHCP Dynamic Host Configuration Protocol

LAN Local Area Network

LED Light Emitting Diode

Mbps Megabits per second.

NTP Network Time Protocol

PBX Private Branch Exchange

PoE Power over Ethernet (as per IEEE 802.3af standard)

RTFM Reset Test Function Management

SIP Session Initiated Protocol

u-law A companding algorithm, primarily used in the digital telecommunication

UC Unified Communications

VoIP Voice over Internet Protocol

CyberData Corporation 930622E Operations Guide

Abbreviations and Terms

i

CyberData Corporation 930622E Operations Guide

Contents

Revision Information ......................................................................................................................3

Chapter 1 Product Overview 1

1.1 How to Identify This Product .....................................................................................................2

1.2 Product features .......................................................................................................................3

1.3 Supported .................................................................................................................................3

1.4 Product Specifications ..............................................................................................................4

Chapter 2 Setting Up the SIP Paging Adapter 5

2.1 Parts List ..................................................................................................................................5

2.2 Typical Installation ....................................................................................................................6

2.3 Connecting the SIP Paging Adapter .........................................................................................7

2.3.1 Connection Options ........................................................................................................7

Pin 1 and 2—Fault Sense Input (Common/Sense) ..........................................................8

Pin 3, 4, and 5—Positive/Negative 600-Ohm Audio Output/Audio Ground Reference .....8

Pin 6 and 7—Relay Contact (Common/Normally Open) ..................................................8

2.3.2 Removable Connector ....................................................................................................8

2.3.3 Connect to the Power Source ........................................................................................9

Poe ...................................................................................................................................9

Non-Poe ...........................................................................................................................9

Chassis Ground ................................................................................................................9

2.3.4 Connect to the Network ...............................................................................................10

2.3.5 Confirm that the SIP Paging Adapter is Up and Running ............................................11

Confirm Power on, Network Connectivity, and Connection Speed ................................11

Verify Network Activity ...................................................................................................11

2.3.6 Announcing the IP Address ..........................................................................................12

2.3.7 Restore the Factory Default Settings ...........................................................................13

2.4 Configuring the SIP Paging Adapter ......................................................................................14

2.4.1 Gather the Required Configuration Information ..........................................................14

Static or DHCP Addressing? .........................................................................................14

Username and Password for Configuration GUI ...........................................................14

SIP Settings ...................................................................................................................14

2.4.2 SIP Paging Adapter Web Page Navigation ..................................................................15

2.4.3 Log in to the Configuration GUI ...................................................................................16

2.4.4 Configure the Device Parameters ................................................................................20

2.4.5 Configure the Network Parameters .............................................................................22

2.4.6 Configure the SiP Parameters ......................................................................................24

2.4.7 Configure the Multicast Parameters .............................................................................27

Assigning Priority ............................................................................................................28

2.4.8 Configure the Night Ringer Parameters .......................................................................29

2.4.9 Configure the Fault Detection Parameters ...................................................................31

2.4.10 Configure the Audio Parameters ................................................................................33

User-created Audio Files ................................................................................................40

2.4.11 Configure the Event Parameters ................................................................................42

Example Packets for Events ...........................................................................................44

2.4.12 Configure the Autoprovisioning Parameters ...............................................................47

Get Autoprovisioning Template Button ...........................................................................49

Autoprovisioning .............................................................................................................50

2.5 Upgrading the Firmware ........................................................................................................52

Upgrade the Firmware ....................................................................................................53

CyberData Corporation 930622E Operations Guide

ii

2.5.1 Reboot the SIP Paging Adapter ...................................................................................54

2.6.1 Command Interface Post Commands ..........................................................................55

Appendix A Setting Up a TFTP Server 66

A.1 Set up a TFTP Server ............................................................................................................66

A.1.1 In a LINUX Environment ..............................................................................................66

A.1.2 In a Windows Environment .........................................................................................66

Appendix B Troubleshooting/Technical Support 67

B.1 Frequently Asked Questions (FAQ) ........................................................................................67

B.1.1 Documentation .............................................................................................................67

B.2 Contact Information ................................................................................................................68

B.3 Warranty .................................................................................................................................69

B.3.1 Warranty & RMA Returns within the United States ......................................................69

B.3.2 Warranty & RMA Returns Outside of the United States ..............................................69

B.3.3 Spare in the Air Policy ..................................................................................................70

B.3.4 Return and Restocking Policy ......................................................................................70

B.3.5 Warranty and RMA Returns Page ................................................................................70

1

CyberData Corporation 930622E Operations Guide

1 Product Overview

The CyberData SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with

SIP and Multicast-based audio sources.

The SIP Paging Adapter (SPA) can be configured to support two separate SIP extensions. SIP

extension one passes audio through to the analog output spoken from the caller’s handset.

When called, SIP extension two plays a bell audio that can be used as a night ringer when

configured in a night ring group.

The SPA supports up to 9 user-uploadable messages that can be played by a DTMF command.

The SPA supports a line-In input for playing MOH. During a page or night ring, this input is muted

with its output restored once the page has stopped.

Product Overview

How to Identify This Product

CyberData Corporation 930622E Operations Guide

2

1.1 How to Identify This Product

To identify the SIP Paging Adapter, look for a model number label similar to the one shown in Figure

1-1. The model number on the label should be 011233.

Figure 1-1. Model Number Label

SIP PAGING ADAPTER

RoHS COMPLIANT

011233A / 021059H

Model number

WWW.CYBERDATA.NET

233000001

Product Overview

Product features

CyberData Corporation 930622E Operations Guide

3

1.2 Product features

● Two SIP extensions

1

● HTTP command interface

● 9 user-uploadable page messages

● 10 channel prioritized multicast ports

● HTTP web interface and setup

● Built-in diagnostics

● 10k Ohm input for MOH

● 600 Ohm balanced audio out

● Unbalanced line-out

● Remote amp fault sensor

● DTMF and programmatic controlled relay

● Delayed page support

● DTMF pass-through

● Cisco SRST

● 10/100 802.3af PoE

1.3 Supported

● HTTP Web-based configuration

Provides an intuitive GUI for easy system configuration and verification of speaker operations.

● DHCP Client

● TFTP Client

● RTP Version 2 Multicast and Unicast

● Audio Codec

• G.711 U-law

• DTMF detection

1.One of these extensions is a dedicated "night ringer," which is not capable of answering a call, and

will only play a stored message while the call is ringing.

Product Overview

Product Specifications

CyberData Corporation 930622E Operations Guide

4

1.4 Product Specifications

Table 1-1. Product Specifications

Specifications

Protocol SIP RFC 3261 Compatible

Power Requirement PoE or 48V DC

Ethernet I/F 10/100 Mbps

Power Input PoE 802.3af or 48VDC

Operating Temperature -10

o

C to 50

o

C (14

o

F to 122

o

F)

Payload Types G711

Page Port Output Balanced 600 Ohm 5VPP

Line In:

Input Signal Amplitudes

Input Impedance

2.0 VPP maximum

10k Ohm

Line Out:

Output Signal Amplitudes

Output Level

Total Harmonic Distortion

Output Impedance

2.0 VPP maximum

+2dBm nominal

0.5% maximum

10k Ohm

Dimensions 6.11” L x 4.05” W x 1.15” H

Weight 1.2 pounds

Boxed Weight 1.8 pounds

Part Number 011233

5

CyberData Corporation 930622E Operations Guide

2 Setting Up the SIP Paging Adapter

The topics in this chapter provide information on setting up, configuring, and using the SIP Paging

Adapter.

2.1 Parts List

The packaging for the SIP Paging Adapter includes the parts in Tab le 2-2.

Quantity Part Name Illustration

1 SIP Paging Adapter

1 Installation Quick Reference Guide

1 Mounting Template (located on the last

page

of the Installation Quick

Reference)

1 Mounting Kit (part #070057A) 

which includes:

(2) #4-6 x 7/8" Mo

unting Anchors

(2) #4 x 1-1/4" Round Phillips Wood

Sc

rews

Table 2-2. Parts List

Setting Up the SIP Paging Adapter

CyberData Corporation 930622E Operations Guide

6

2.2 Typical Installation

Figure 2-2 illustrates how the SIP Paging Adapter is normally installed as part of a paging system.

Typical SPA Configuration (600 Ohm output with Supervision switch)

Figure 2-2. Typical Installation

Setting Up the SIP Paging Adapter

Connection Options

CyberData Corporation 930622E Operations Guide

7

2.3 Connecting the SIP Paging Adapter

Before you connect the SIP Paging Adapter, be sure that you have received all of the parts

described in

Section 2.1, "Parts List".

2.3.1 Connection Options

See Figure 2-3 and Ta bl e 2-1 for the connection options that are available for the SIP Paging

Adapter.

Figure 2-3. Connection Options

Pin 1 Pin2 Pin 3 Pin 4 Pin 5

Line In Line Out PowerPage Port Output

Pin 6 Pin 7

48VDC

Table 2-1. Page Port Output Connections

Pin Description

1 Fault Sense Input (Common). See Section 2.3.1.1, "Pin 1 and 2—Fault Sense Input

(Common/Sense)".

2 Fault Sense Input (Sense). See Section 2.3.1.1, "Pin 1 and 2—Fault Sense Input

(Common/Sense)".

3 Positive 600-Ohm Audio Output

a

. See Section 2.3.1.2, "Pin 3, 4, and 5—Positive/Negative 600-

Ohm Audio Output/Audio Ground Reference".

4 Negative 600-Ohm Audio Output.

a

. See Section 2.3.1.2, "Pin 3, 4, and 5—Positive/Negative 600-

Ohm Audio Output/Audio Ground Reference".

5 Audio Ground Reference. See Section 2.3.1.2, "Pin 3, 4, and 5—Positive/Negative 600-Ohm Audio

Output/Audio Ground Reference".

6 Relay Contact - Common

b

. See Section 2.3.1.3, "Pin 6 and 7—Relay Contact (Common/Normally

Open)".

7 Relay Contact - Normally Open

b

. See Section 2.3.1.3, "Pin 6 and 7—Relay Contact

(Common/Normally Open)".

a. The 600-Ohm audio output of the page port is also suited for interfaces with lower input

impedances.

b. 1 Amp at 30 VDC for continuous loads

Setting Up the SIP Paging Adapter

Removable Connector

CyberData Corporation 930622E Operations Guide

8

2.3.1.1 Pin 1 and 2—Fault Sense Input (Common/Sense)

This input was designed as a method of monitoring an external amplifier that is equipped with a fault

sense relay.

When enabled via the web interface (Section 2.4.9, "Configure the Fault Detection Parameters"), this

input (when closed) will play a user uploadable audio file out of the line-out connection and/or place

a SIP call to a pre-determined extension and play that file.

2.3.1.2 Pin 3, 4, and 5—Positive/Negative 600-Ohm Audio Output/Audio Ground

Reference

This output allows direct connection to paging amplifiers requiring a "Page Port" type input that

meets a balanced 600 Ohm 5VPP signal.

2.3.1.3 Pin 6 and 7—Relay Contact (Common/Normally Open)

When enabled on the web interface (Section 2.4.4, "Configure the Device Parameters"), every time

an audio file is played out of the local line-out or 600 Ohm output, the relay will close, thereby

enabling amplifiers with a remote turn-on capability to become active.

2.3.2 Removable Connector

Figure 2-4 shows the connector that is removable on the SIP Paging Adapter.

Figure 2-4. Removable Connector

Setting Up the SIP Paging Adapter

Connect to the Power Source

CyberData Corporation 930622E Operations Guide

9

2.3.3 Connect to the Power Source

To use PoE, plug a Cat 5 Ethernet cable from the SIP Paging Adapter Ethernet port to your network.

As an alternative to PoE, you can plug one end of a +48V DC power supply into the SIP Paging

Adapter, and plug the other end into a receptacle. If required, connect the earth grounding wire to

the chassis ground on the back of the unit. See

Figure 2-5.

Figure 2-5. Connecting to the Power Source

To set up the SIP Paging Adapter, connect

the device to your network:

Poe

•For PoE, plug one end of an 802.3af

Ethernet cable into the SIP Paging

Adapter Ethernet port. Plug the other

end of the Ethernet cable into your

network. See the figure on the left.

Non-Poe

•For Non-PoE, connect the SIP Paging

Adapter to a 48VDC power supply.

See the figure on the left.

Chassis Ground

• If required, connect the earth

grounding wire to the Chassis

Ground. See the figure on the left.

Chassis ground

Chassis Ground

PoE

Non PoE with 48 VDC Power Supply

Setting Up the SIP Paging Adapter

Connect to the Network

CyberData Corporation 930622E Operations Guide

10

2.3.4 Connect to the Network

Plug one end of a standard Ethernet cable into the SIP Paging Adapter Ethernet port. Plug the other

end into your network.

Figure 2-6. Connecting to the Network

Setting Up the SIP Paging Adapter

Confirm that the SIP Paging Adapter is Up and Running

CyberData Corporation 930622E Operations Guide

11

2.3.5 Confirm that the SIP Paging Adapter is Up and Running

The LEDs on the front of the SIP Paging Adapter verify the unit’s operations.

Figure 2-7. SIP Paging Adapter LEDs

2.3.5.1 Confirm Power on, Network Connectivity, and Connection Speed

When you plug in the Ethernet cable or power supply:

• The round, GREEN/BLUE Status LED on the front of the SIP Paging Adapter comes on

indicating that the power is on. Once the device has been initialized, this LED blinks at one

second intervals.

• The square, GREEN/AMBER Link LED above the Ethernet port indicates that the network

connection has been established. The Link LED changes color to confirm the auto-negotiated

connection speed:

• The Link LED is GREEN at 10 Mbps.

• The Link LED is AMBER at 100 Mbps.

• The GREEN Paging LED comes on after the device is booted and initialized. This LED blinks

when a page is in progress. You can disable Beep on Initialization on the Device

Configuration page.

2.3.5.2 Verify Network Activity

The square, GREEN Activity LED blinks when there is network traffic.

Status

(GREEN/BLUE LED)

Paging

(GREEN LED)

Link

(GREEN/AMBER LED)

Activity

(GREEN LED)

Setting Up the SIP Paging Adapter

Announcing the IP Address

CyberData Corporation 930622E Operations Guide

12

2.3.6 Announcing the IP Address

To announce the IP address for the SIP Paging Adapter, briefly press and then quickly release the

RTFM switch. See

Figure 2-8.

Note The IP address announcement can be heard if a speaker or amplified speaker is connected

to the unit.

Figure 2-8. RTFM Switch

RTFM Switch

Page is loading ...

CyberData 011233 Product information

CyberData 011233 Product information

Related papers

Other documents