B4-4-19
B4-4-24
B5L-4-19
B5L-4-24
B5R-4-19
B5R-4-24
B5.5L-4-19
B5.5L-4-24
B5.5R-4-19
B5.5R-4-24
B6L-4-19
B6L-4-24
B6R-4-19
B6R-4-24
B6RL-4-19
B6RL-4-24
B7RL-4-19
B7RL-4-24
B8RL-4-19
B8RL-4-24
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG40.39 Rev. 09/08
Catalog Specification Sheet No.
EG40.39
Spec-Bar 2000
®
Four-Compartment Sinks
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Design and Construction Features
• Body, legs and crossbracing constructed of type 304
stainless steel for strength and corrosion resistance.
• Backsplash, sides, bottom, front panel, drain pans,
perforated inserts and bowls are constructed of 20 gauge
stainless steel. Leg channels, legs and crossbracing are
16 gauge stainless steel.
• Legs are 1
5
⁄8˝ (41mm) diameter type 304 stainless steel with
stainless steel bullet feet.
• Sink compartments are 10˝ x 14˝ x 9
1
⁄2˝ (254 x 356 x
241mm) with T&S hot and cold water faucet.
• Faucet is a backsplash mounted double hinged T&S faucet
on 4˝ (102mm) centers and
1
⁄2˝ (13mm) NPT inlet. Hot and
cold water connections required.
• All models feature a backsplash mounted double-hinged
T&S faucet.
• Stainless steel workboard on one or both sides with
independent drain.
• Workboards feature removable perforated stainless
steel insert.
• Drains are 1
1
⁄2˝ (38mm) I.P.S. threaded with nut and washer.
Options / Accessories
Speed rail
Scrap basket
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Spec-Bar 2000
®
Four-Compartment Sinks
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
Certifications / Approvals
Short Form Specifications
Eagle Spec-Bar 2000
®
Four Compartment Bar sink, model
____________. Heavy gauge type 304 stainless steel sink
bowls, body, legs, leg channels and cross rails. Four 10˝ x 14˝
x 9
1
⁄2˝-deep stainless steel drawn sink bowls with drains and
standpipe overflows. Stainless steel drainboards feature
independent drains and removable perforated stainless steel
inserts. T&S splash mounted faucet. Stainless steel adjustable
bullet feet.
4-compartment sink