LG 55LE5308 User manual

www.lg.com

OWNER’S MANUAL

LCD TV / LED LCD TV

Please read this manual carefully before operating

your set and retain it for future reference.

ENGLISH

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI Licensing LLC.

Wall Mounting Bracket

Separate purchase

(19/22/26/32LD3

***

,

32LD4

***

, 32LD5

***

,

19/22/26/32LE3

***

,

32LE4

***

, 22/26LE5

***

,

32LE5

***

)

LSW100B or

LSW100BG

(37/42/47LD4

***

,

42/46LD5

***

,

37/42LE4

***

,

37/42/47LE5

***

)

LSW200B or

LSW200BG

(52/60LD5

***

,

55LE5

***

)

LSW400B or

LSW400BG

Wireless Media Box

(32/42/46/52/60LD5

***

,

32/37/42LE4

***

,

32/37/42/47/55LE5

***

)

I

CONTENTS

PREPARATION

LCD TV Models : 19/22/26/32LD3

***..............A-1

LCD TV Models : 32/37/42/47LD4

***............A-14

LCD TV Models : 32/42/46/52/60LD5

***

......A-24

LED LCD TV Models : 19/22/26/32LE3

***

, 32/37/

42LE4

***

, 22/26LE5

***,

32/37/42/47/55LE5

***

...... A-33

EXTERNAL EQUIPMENT SETUP

Antenna Connection ............................................1

Connecting with a Component cable

..................2

Connecting with an HDMI cable

.........................3

Connecting with an HDMI to DVI cable

..............4

Connecting with a Euro Scart cable

...................5

Usb setup

............................................................6

Connecting with a RF Cable

...............................6

Connecting with a RCA cable

.............................7

Connecting with a D-sub 15 pin cable

................8

Insertion of CI Module

.........................................9

Headphone Setup

...............................................9

Digital audio out Setup

......................................10

External Equipment WIreless Connection

........11

Supported Display Resolution

...........................12

Screen Setup for PC mode

...............................13

WATCHING TV / PROGRAMME CON-

TROL

Turning on the TV .............................................17

Initializing Setup

...............................................17

Programme Selection

........................................17

Volume Adjustment

...........................................17

Quick Menu

.......................................................18

On Screen Menus Selection and adjustment

...19

Auto programme tuning

...................................20

Cable DTV setting

.............................................25

Manual programme Tuning

...............................26

Programme Edit

...............................................30

CI [Common Interface] Information

...................34

Software Update

...............................................35

Picture/Sound test

.............................................37

Diagnostics

........................................................38

Product/service information...............................39

Simple Manual

..................................................40

Selecting the Programme List

...........................41

Input List

............................................................43

Input Label

........................................................44

Data Service

......................................................45

SIMPLINK

..........................................................46

AV Mode

............................................................50

Initializing(Reset to original factory settings)

....51

TO USE A USB DEVICE

When connecting a USB device .......................52

Movie list

..........................................................54

Photo list

............................................................65

Music list

............................................................75

DivX Registration Code

....................................84

Deactivation

.....................................................85

EPG(ELECTRONIC PROGRAMME

GUIDE)(IN DIGITAL MODE)

Switch on/off EPG .............................................87

Select a programme

..........................................87

Button Function in NOW/NEXT Guide Mode

...87

Button Function in 8 Day Guide Mode

.............88

Button Function in Date Change Mode

............89

Button Function in Extended Description Box

..89

Button Function in Record/Remind Setting Mode 90

Button Function in Schedule List Mode ............91

II

CONTENTS

PICTURE CONTROL

Picture Size (Aspect Ratio) Control ..................92

Picture Wizard

...................................................94

Energy Saving

...................................................95

Preset Picture Settings

.....................................96

Manual Picture Adjustment

...............................97

Picture Improvement Technology

......................98

Expert Picture Control

.......................................99

Picture Reset

...................................................102

Trumotion

........................................................103

Power Indicator

..............................................104

Mode Setting

...................................................105

Demo Mode

.....................................................106

SOUND & LANGUAGE CONTROL

Auto Volume Leveler .......................................107

Clear Voice II

...................................................108

Preset Sound Settings-Sound Mode

..............109

Sound Setting Adjustment -User Mode

..........110

Infinite Sound

..................................................110

Balance

........................................................... 111

TV Speakers On/ Off Setup

............................112

DTV Audio Setting (in digital mode only)

........113

Selecting Digital Audio out

..............................114

Audio Reset

.....................................................115

Audio Description (In digital mode only)

.........116

I/II

-

Stereo/Dual Reception (In Analogue Mode Only) 117

- NICAM Reception (In Analogue Mode Only) 118

- Speaker Sound Output Selection ................118

On-Screen Menu Language / Country Selection 119

Language Selection ........................................120

TIME SETTING

Clock Setup .....................................................122

Auto on/off time setting

...................................123

Sleep Timer setting

.........................................124

PARENTAL CONTROL / RATINGS

Set Password & Lock System.........................125

Block Programme

............................................126

Parental Control (In Digital Mode only)

...........127

External Input Blocking

...................................128

Key Lock..........................................................129

TELETEXT

Switch on/off ...................................................130

SIMPLE Text....................................................130

TOP Text..........................................................131

FASTEXT

........................................................131

Special Teletext Functions

..............................132

DIGITAL TELETEXT

Teletext within Digital Service .........................133

Teletext in Digital Service

................................133

APPENDIX

Troubleshooting ...............................................134

Maintenance

....................................................136

Product Specifications

.....................................137

IR Codes

.........................................................148

External Control Device Setup

........................149

Open source software notice

..........................156

A-1

PREPARATION

ACCESSORIES

LCD TV MODELS : 19/22/26/32LD3

***

Ensure that the following accessories are included with your TV. If an accessory is missing, please

contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.

Owner’s Manual Batteries

(AAA)

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains or

fingerprints on the surface

of the TV with the polish-

ing cloth.

Do not use excessive

force. This may cause

scratching or discoloura-

tion.

Ferrite Core

(

This item is not included

for all models.

)

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Install the power plug closely.

Protection Cover

Only 19/22LD3

***

Cable Holder

1-screw for stand fixing

Bolts for stand assembly

Protection Cover

Only 26/32LD3

***

(M4x20)

x 8

A-2

PREPARATION

FRONT PANEL CONTROLS

■ Image shown may differ from your TV.

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

►The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall.

►Do not drag the TV. The floor or the product may be damaged.

VOLUME

PROGRAMME

OK

MENU

INPUT

POWER

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates blue when the TV is switched on.

Remote Control Sensor

SPEAKER

Only 26/32LD3

***

PROGRAMME

VOLUME

MENUPOWER

OKINPUT

Only 19/22LD3

***

A-3

PREPARATION

BACK PANEL INFORMATION

■ Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.137 to 147) Never attempt to operate

the TV on DC power.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

Component Input

Connect a component video/audio device to

these jacks.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4 6 7

5

9 10

8

11

12

13

Only 19/22LD3

***

A-4

PREPARATION

■ Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.137 to 147) Never attempt to operate

the TV on DC power.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

Component Input

Connect a component video/audio device to

these jacks.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

1

2

3

4

5

6

7

8

9

10

11

12

1

2

3

4 5 6

8 9

7

Only 26LD3

***

10

11

2

12

13

A-5

PREPARATION

Only 32LD3

***

■ Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The volt-

age is indicated on the Specifications page.

(► p.137 to 147) Never attempt to operate

the TV on DC power.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of

equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

Euro Scart Socket (AV1)

Connect scart socket input or output from an

external device to these jacks.

Component Input

Connect a component video/audio device to

these jacks.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

RGB IN Input

Connect the output from a PC.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory

Card International Association) Card Slot

Insert the CI Module to PCMCIA CARD

SLOT.

(This feature is not available in all countries.)

Headphone Socket

Plug the headphone into the headphone

socket.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

1

2

3

4

5

6

7

8

9

10

11

12

13

2

3 4 5 6

7 98

10

11

2

12

13

1

A-6

PREPARATION

STAND INSTALLATION

Only 19/22LD3

***

■ Image shown may differ from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,

the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,

the bolt can deviate from abrasion of the tightening part of the bolt.

Only 26/32LD3

***

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in

the back of the TV.

1

3

4

Assemble the parts of the Stand Body with

the Stand Base of the TV.

2

Stand Body

Stand Base

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

1

Assemble the TV as shown.

2

A-7

PREPARATION

■ Image shown may differ from your TV.

When installing the wall-mounted unit, use the protection cover.

NOT USING THE DESK-TYPE STAND

Carefully place the TV screen side down

on a cushioned surface to protect the

screen from damage.

1

Only 19/22LD3

***

Loose the bolts from TV.

2

Detach the stand from TV.

3

Insert the Protection Cover into the TV.

After removing the protection paper from

the protection cover, adhere it to the TV as

shown.

4

Protection Cover

Insert the Protection Cover into the TV until

clicking sound.

Only 26/32LD3

***

Protection Cover

A-8

PREPARATION

Connect the cables as necessary.

To connect additional equipment, see the

External Equipment Setup section.

1

Open the Cable Management Clip as

shown.

2

Fit the Cable Management Clip as shown.

3

Only 26/32LD3

***

Cable Management Clip

BACK COVER FOR WIRE ARRANGEMENT

■ Image shown may differ from your TV.

NOTE

►Do not use the Cable Management Clip to lift

the TV.

- If the TV is dropped, you may be injured or the

TV may be damaged.

Only 19/22LD3

***

After connecting the cables as necessary, install

Cable Holder as shown and bundle the cables.

Cable Holder

A-9

PREPARATION

SWIVEL STAND

(Except for 19/22LD3

***

)

■ Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20

degrees to suit your viewing position.

POSITIONING YOUR DISPLAY

(Only 19/22LD3

***

)

■ Image shown may differ from your TV.

■ Adjust the position of the panel in various ways

for maximum comfort.

• Tilt range

ATTACHING THE TV TO A

DESK (Only 26/32LD3

***

)

Desk

Stand

■ Image shown may differ from your TV.

The TV must be attached to desk so it cannot be

pulled in a forward/backward direction, potentially

causing injury or damaging the product. Use only

an attached screw.

WARNING

►To prevent TV from falling over, the TV

should be securely attached to the floor/wall

per installation instructions. Tipping, shaking,

or rocking the machine may cause injury.

1-Screw ( provided as parts of the product)

A-10

PREPARATION

■ This feature is not available for all models.

■ Image shown may differ from your TV.

KENSINGTON SECURITY

SYSTEM

2

CAREFUL INSTALLATION

ADVICE

■ You should purchase necessary components

to fix the TV safety and secure to the wall on

the market.

■ Position the TV close to the wall to avoid the

possibility of it falling when pushed.

■ The instructions shown below are a safer way

to set up the TV, by fixing it to the wall, avoid-

ing the possibility of it falling forwards if pulled.

This will prevent the TV from falling forward

and causing injury. This will also prevent the

TV from damage. Ensure that children do not

climb or hang from the TV.

3

Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen

then bolts.)

* Insert the eye-bolts or TV brackets/bolts and

tighten them securely in the upper holes.

Secure the wall brackets with the bolts on the

wall. Match the height of the bracket that is

mounted on the wall.

Use a sturdy rope to tie the product for align-

ment. It is safer to tie the rope so it becomes

horizontal between the wall and the product.

2

1

The TV is equipped with a Kensington Security

System connector on the back panel. Connect

the Kensington Security System cable as shown

below.

For the detailed installation and use of the

Kensington Security System, refer to the user’s

guide provided with the Kensington Security

System.

For further information, contact http://www.kens-

ington.com, the internet homepage of the

Kensington

company. Kensington sells security systems for

expensive electronic equipment such as note-

book PCs and LCD projectors.

1

2

3

NOTE

► When moving the TV undo the cords first.

► Use a platform or cabinet strong and large

enough to support the size and weight of the TV.

► To use the TV safely make sure that the height of

the bracket on the wall and on the TV is the

same.

NOTE

► The Kensington Security System is an optional

accessory.

► If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

► Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue

spots. However, they have no adverse effect on

the monitor's performance.

► Avoid touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary distor-

tion effects on the screen.

A-11

PREPARATION

■ The TV can be installed in various ways such as

on a wall, or on a desktop etc.

■ The TV is designed to be mounted horizontally.

Power

Supply

Circuit

breaker

EARTHING

Ensure that you connect the earth wire to prevent

possible electric shock. If grounding methods are

not possible, have a qualified electrician install a

separate circuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

WALL MOUNT: HORIZONTAL

INSTALLATION

■ We recommend the use of a LG Brand wall

mounting bracket when mounting the TV to a

wall.

■ We recommend that you purchase a wall mount-

ing bracket which supports VESA standard.

■ LG recommends that wall mounting be per-

formed by a qualified professional installer.

DESKTOP PEDESTAL

INSTALLATION

Model

VESA

(A

*

B)

Standard

Screw

Quantity

19/22LD3

***

26/32LD3

***

100

*

100

200

*

100

M4

4

10 cm

NOTE

►Should Install wall mount on a solid wall per-

pendicular to the floor.

►Should use a special wall mount, if you want

to install it to ceiling or slanted wall.

►The surface that wall mount is to be mount-

ed on should be of sufficient strength to sup-

port the weight of TV set; e.g. concrete, nat-

ural rock, brick and hollow block.

►Installing screw type and length depends on

the wall mount used. Further information,

refer to the instructions included with the

mount.

►LG is not liable for any accidents or damage

to property or TV due to incorrect installa-

tion:

- Where a non-compliant VESA wall mount

is used.

- Incorrect fastening of screws to surface

which may cause TV to fall and cause per-

sonal injury.

- Not following the recommended Installation

method.

10 cm

For adequate ventilation allow a clearance of 10

cm all around the TV.

10 cm

■ Image shown may differ from your TV.

A-12

PREPARATION

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

(POWER)

ENERGY

SAVING

AV MODE

INPUT

TV/RAD

Switches the TV on from standby or off to standby.

Adjust the Energy Saving mode of the TV.(►

p.95)

It helps you select and set images and sounds

when connecting AV devices.(►

p.50)

External input mode rotate in regular sequence.

(

►

p.43)

Selects Radio, TV and DTV channel.

0 to 9 number

button

LIST

Q.VIEW

Selects a programme.

Selects numbered items in a menu.

Displays the programme table.

(

►

p.41)

Returns to the previously viewed programme.

MENU

GUIDE

Q. MENU

BACK

EXIT

INFO i

THUMBSTICK

(Up/Down/Left/Right)

OK

Selects a menu.

Clears all on-screen displays and returns to TV

viewing from any menu.

(

►

p.19)

Shows programme guide.

(

►

p.86)

Select the desired quick menu source. (Aspect

Ratio, Clear Voice II , Picture Mode, Sound Mode,

Audio (or Audio Language), Sleep Timer, Skip Off/

On, USB Device).(►

p.18)

Allows the user to move return one step in an inter-

active application, EPG or other user interaction

function.

Clears all on-screen displays and returns to TV

viewing from any menu.

Shows the present screen information.

Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

Accepts your selection or displays the current

mode.

Coloured

buttons

These buttons are used for teletext (on TELETEXT

models only), Programme edit.

TELETEXT

BUTTONS

SUBTITLE

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.(►

p.130)

Recalls your preferred subtitle in digital mode.

1

A-13

PREPARATION

VOLUME UP

/DOWN

FAV

MARK

RATIO

MUTE

Programme

UP/DOWN

PAGE UP/

DOWN

Adjusts the volume.

Displays the selected favourite programme.

Select the input to apply the Picture Wizard

settings.

Check and un-check programmes in the USB

menu.

Selects your desired Aspect Ratio of picture.

(►

p.92)

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the

next one.

Installing Batteries

■ Open the battery compartment cover on the back and install

the batteries matching correct polarity (+with +,-with -).

■ Install two 1.5 V AAA batteries. Do not mix old or used batter-

ies with new ones.

■ Close cover.

■ To remove the batteries, perform the installation actions in

reverse.

SIMPLINK /

MY MEDIA Menu

control buttons

Controls SIMPLINK or MY MEDIA menu(Photo List

and Music List).

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(►

p.46)

A-14

PREPARATION

ACCESSORIES

LCD TV MODELS : 32/37/42/47LD4

***

Ensure that the following accessories are included with your TV. If an accessory is missing, please

contact the dealer where you purchased the TV.

■ Image shown may differ from your TV.

Owner’s Manual

Batteries

(AAA)

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains or

fingerprints on the surface

of the TV with the polish-

ing cloth.

Do not use excessive

force. This may cause

scratching or discoloura-

tion.

Ferrite Core

(

This item is not included

for all models.

)

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Install the power plug closely.

Bolts for stand assembly

1-screw for stand fixing

(Only 32/37/42LD4

***

)

x 8

(M4x20)

(Only 32/37/

42/47LD45

**

)

Protection

Cover

x 4

(M4x20)

(Only 32/37/

42/47LD42

**

)

or

A-15

PREPARATION

FRONT PANEL CONTROLS

■ Image shown may differ from your TV.

NOTE

►TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

►The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

CAUTION

►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall.

►Do not drag the TV. The floor or the product may be damaged.

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

Remote Control Sensor

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates blue when the TV is switched on.

SPEAKER

Only 32/37/42/47LD45

**

A-16

PREPARATION

Only 32/37/42/47LD42

**

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is

switched on.

SPEAKER

Page is loading ...

LG 55LE5308 User manual

LG 55LE5308 User manual

Other documents