DGS-105 & DGS-108 5/8 Port Unmanaged Gigabit Switch
Technical Specications
DGS-105 DGS-108
SwitchingFabric •10Gbps •16Gbps
Standards • IEEE802.310BASE-TEthernet(twisted-paircopper)
• IEEE802.3u100BASE-TXFastEthernet(twisted-pair
copper)
• IEEE802.3ab1000BASE-TGigabitEthernet(twisted-
paircopper)
• ANSI/IEEE802.3NWayauto-negotiation
• IEEE802.3xFlowControl
• IEEE802.1pQoS
• IEEE802.3azEnergy-EfficientEthernet(EEE)
Protocol •CSMA/CD
DataTransferRates • Ethernet:
-10Mbps(halfduplex),20Mbps(fullduplex)
• FastEthernet:
-100Mbps(halfduplex),200Mbps(fullduplex)
• GigabitEthernet:
-2000Mbps(fullduplex)
Topology •Star
Think Green
The DGS-105/DGS-108 is a plug-and-play networking switch that oers
D-Link’s Green Technology to save energy and reduce heat, which in turn
extends product life without sacricing performance or functionality. The
switchsupportsIEEE802.3azEnergy-EcientEthernet(EEE)whichdetects
when a connected computer is shut down or when there is no Ethernet trac, at
which time the switch will automatically power down the idle port, saving
a substantial amount of power. In addition, the switch can also save energy
by detecting the cable length and using only as much power as necessary.
Working together these features drastically reduce power consumption
and heat dissipation, resulting in extended life and substantial cost savings.
IEEE 802.1p QoS
QoS prioritizes network trac so that time-sensitive data is delivered eciently,
even during bursts of high data trac. This helps ensure an optimal experience
for streaming media and VoIP calls.
Environmentally Friendly
The DGS-105/DGS-108 Gigabit switch was designed with the environment
inmind.ItiscompliantwithEnergyStarLevelV,CEC,andMEPSregulations
whichrequiretheuseofenergyecientpoweradapters.Builttocomplywith
RoHSstandardstominimizeuseofhazardousmaterialsandispackagedwith
an EnergyStar Level V qualied power adapter all in a recyclable packaging
making this product truly environmental friendly.
Cable Diagnostics Function
TheD-LinkCableDiagnosticsFunctionenablesuserstobeinstantlyaware
of cable conditions through the LED display on the front-panel. Users
can determine whether the pin connections of their cable connectors
are correct, facilitating prompt network troubleshooting if required.