Philips DLM1677/10 Datasheet

Category
Mobile headsets
Type
Datasheet

Philips DLM1677/10 is a stylish molded protective case for mobile phones. Its design features a convenient full cover for optimal protection and three shock-absorbing foam layers. With its slim design, it fits easily into your pocket or bag, providing trustworthy protection even on the go. The outer layer is a woven textile, the middle is a pre-formed EVA foam with air cells and the inner one is a soft, lint-free microfibre. The microfibre layer additionally cleans the surface of your device. The easy-pull closure tab helps you to remove the device from the case.

Philips DLM1677/10 is a stylish molded protective case for mobile phones. Its design features a convenient full cover for optimal protection and three shock-absorbing foam layers. With its slim design, it fits easily into your pocket or bag, providing trustworthy protection even on the go. The outer layer is a woven textile, the middle is a pre-formed EVA foam with air cells and the inner one is a soft, lint-free microfibre. The microfibre layer additionally cleans the surface of your device. The easy-pull closure tab helps you to remove the device from the case.

Philips
Protective pouch
For mobile phone
DLM1677
Protect your phone in a slim pouch
with a bright burst of colour
Use this sleek and stylish moulded case to protect a variety of smaller mobile phones. The
pouch design features a full cover and shock absorbing foam for optimal device
protection. Easy-pull closure tab helps to remove the device from the pouch.
Attractive protection
Simple, stylish design
Protection on the go
Three layers of protection
Slim design fits easily into your pocket
Smart design
Convenient and stylish design
Issue date 2011-09-05
Version: 2.1.2
12 NC: 8670 000 78902
EAN: 87 12581 61064 7
© 2011 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
DLM1677/10
Protective pouch
For mobile phone
Highlights
Simple, stylish design
This case is designed to provide protection for your
device - in style.
Slim, pocket-friendly design
The slim design adds protection with minimal added
bulk, so your device still fits easily into your pocket
or bag for protection on the go.
Convenient and stylish design
The convenient and stylish design fits anywhere and
goes everywhere.
Three layers of protection
Three layers provide superior protection. The outer
layer is made of a durable woven textile. The middle
layer consists of pre-formed EVA foam with air cells
to add cushioning. The inner layer of soft, lint-free
microfibre protects and cleans the device's face.
Mobile phone compatibility
Fits the following:: Blackberry Curve 8300,
Blackberry Curve 8520, Blackberry Curve 8530,
Blackberry Torch 9800 and other devices smaller
than 112 mm tall x 63 mm wide x 18 mm thick
Design and finishing
Colour(s): Black and green
Packaging dimensions
Packaging type: Box
Number of products included: 1
Packaging dimensions (W x H x D):
10
.16 x 17.78 x 2.5 cm
Gross weight: 0.101 kg
Net weight: 0.045 kg
Tare weight: 0.056 kg
EAN: 87 12581 61064 7
Outer Carton
Number of consumer packages: 18
•Outer carton (L x W x H):
32
.39 x 28.58 x 18.54 cm
Gross weight: 1.75 kg
Net weight: 0.81 kg
Tare weight: 0.94 kg
GTIN: 1 87 12581 61064 4
Inner Carton
Number of consumer packages: 3
Inner carton (L x W x H): 17.78 x 13.67 x 9.5 cm
Gross weight: 0.29 kg
Net weight: 0.135 kg
Tare weight: 0.155 kg
GTIN: 2 87 12581 61064 1
  • Page 1 1
  • Page 2 2

Philips DLM1677/10 Datasheet

Category
Mobile headsets
Type
Datasheet

Philips DLM1677/10 is a stylish molded protective case for mobile phones. Its design features a convenient full cover for optimal protection and three shock-absorbing foam layers. With its slim design, it fits easily into your pocket or bag, providing trustworthy protection even on the go. The outer layer is a woven textile, the middle is a pre-formed EVA foam with air cells and the inner one is a soft, lint-free microfibre. The microfibre layer additionally cleans the surface of your device. The easy-pull closure tab helps you to remove the device from the case.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI