Ubiquiti Networks NS2 Datasheet

Category
WLAN access points
Type
Datasheet

Ubiquiti Networks NS2 is a powerful networking device that brings you many possibilities. It is equipped with Atheros 180MHz MIPS CPU, 16MB of RAM, and 4MB of Flash memory. It operates in 2.4GHz and supports 802.11b/g wireless standards. The device has a 10dBi dual-polarity antenna, which provides a wide coverage and strong signal. It also supports the use of external antennas via the RP-SMA connector, allowing you to extend the range and reach even further. NS2 is versatile and can be used in various scenarios. It is perfect for creating point-to-point and point-to-multipoint wireless connections, making it ideal for both indoor and outdoor use cases. It is commonly employed by network administrators to establish wireless networks in schools, offices, warehouses, and even entire neighborhoods.

Ubiquiti Networks NS2 is a powerful networking device that brings you many possibilities. It is equipped with Atheros 180MHz MIPS CPU, 16MB of RAM, and 4MB of Flash memory. It operates in 2.4GHz and supports 802.11b/g wireless standards. The device has a 10dBi dual-polarity antenna, which provides a wide coverage and strong signal. It also supports the use of external antennas via the RP-SMA connector, allowing you to extend the range and reach even further. NS2 is versatile and can be used in various scenarios. It is perfect for creating point-to-point and point-to-multipoint wireless connections, making it ideal for both indoor and outdoor use cases. It is commonly employed by network administrators to establish wireless networks in schools, offices, warehouses, and even entire neighborhoods.

www.ubnt.com
NanoStation2
Datasheet
DataRate TX Power Tolerance DataRate Sensitivity Tolerance
1Mbps 26 dBm +/-1dB 1Mbps -97 dBm +/-1dB
2Mbps 26 dBm +/-1dB 2Mbps -96 dBm +/-1dB
5.5Mbps 26 dBm +/-1dB 5.5Mbps -95 dBm +/-1dB
11Mbps 26 dBm +/-1dB 11Mbps -92 dBm +/-1dB
6Mbps 26 dBm +/-1dB 6Mbps -94 dBm +/-1dB
9Mbps 26 dBm +/-1dB 9Mbps -93 dBm +/-1dB
12Mbps 26 dBm +/-1dB 12Mbps -91 dBm +/-1dB
18Mbps 26 dBm +/-1dB 18Mbps -90 dBm +/-1dB
24Mbps 26 dBm +/-1dB 24Mbps -86 dBm +/-1dB
36Mbps 24 dBm +/-1dB 36Mbps -83 dBm +/-1dB
48Mbps 23 dBm +/-1dB 48Mbps -77 dBm +/-1dB
54Mbps 22 dBm +/-1dB 54Mbps -74 dBm +/-1dB
802.11b
802.11g OFDM
802.11g OFDM
TX SPECIFICATIONS RX SPECIFICATIONS
802.11b
INTEGRATED ADAPTIVE ANTENNA POLARITY + EXTERNAL ANTENNA SUPPORT (4 OPTIONS TOTAL)
Outdoor (BaseStation Antenna Dependent):
Over 15km
RANGE PERFORMANCE
Wireless Approvals
FCC Part 15.247, IC RS210, CE
RADIO OPERATING FREQUENCY 2412-2462 MHz
SYSTEM INFORMATION
Processor Specs
Atheros AR2315 SOC, MIPS 4KC, 180MHz
Memory Information
16MB SDRAM, 4MB Flash
Networking Interface
1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Gain
10dBi (2400-2483.5MHz)
External Connector RP-SMA
RoHS Compliance
YES
REGULATORY / COMPLIANCE INFORMATION
Multi-Polarized 3dB Beamwidth Elevation
30 degrees
Polarization Selection Software Controlled 3dB Beamwidth Azimuth
60 degrees
Polarization
Azimuth Elevation
PHYSICAL / ELECTRICAL / ENVIRONMENTAL
Enclosure Size 26.4 cm x 8 cm x 3cm
Weight
0.4kg
12V, 1A (12 Watts). Supply and injector included
Enclosure Characteristics Outdoor UV Stabalized Plastic
Mounting Kit
Pole Mounting Kit included
Operating Temperature
-20C to +70C
Operating Humidity
5 to 95% Condensing
Power Method
Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Max Power Consumption
4 Watts
Power Supply
SOFTWARE
visit www.ubnt.com/airos
Shock and Vibration ETSI300-019-1.4
www.ubnt.com
NanoStation2
Air OS is an intuitive, versatile, highly developed Ubiquiti rmware
technology that is included with NanoStation.
It is exceptionally intuitive and was designed to require no training to
operate. Behind the user interface is a powerful rmware architecture
which enables hi-performance outdoor multipoint networking.
by
Ubiquiti Networks
TM
NanoStation utilizes Adaptive Antenna Polarity technology, which can
statically or dynamically software switch antenna polarities to optimize
your connections.
Atheros 180MHz MIPS
16MB RAM
4MB FLASH
2.4GHz, 802.11b/g
5/10/20MHz
10dBi x2
Adaptive Vertical/Horizontal
Yes, RP-SMA Connector
15km+ (100km using ext ant.)
25Mbps+ TCP/IP
Pole Mount (straps included)
Ubiquiti Window/Wall Mount (sold seperately)
26.4cm x 8cm x 3cm
0.4 kg
12V, 1A POE (included)
FCC 15.247, IC, CE
CPU
RAM
Flash
Wireless
Channel width
Antenna Gain
Polarity
Ext. Ant. Option
Range
Throughput
Mounting
Accessories
Size
Weight
Power Supply
Approvals
AAP
TECHNOLOGY
External Antenna
RP-SMA Connector
(optional)
Reset
Waterproof
Sliding Door
External Status LEDs
Multiple Mounting
Options
Integrated 10dBi
dual polarity antenna
Ethernet Connection
NanoStation
1 (Qty.)
Plastic Straps
2 (Qty.)
PoE Injector
1 (Qty.)
AC Adapter
1 (Qty.)
Package Contents
Mounting Options
1. Pole Mount (Standard)
2. Wall Mount (optional) 3. Window Mount (optional)
pole
wall
window
  • Page 1 1
  • Page 2 2

Ubiquiti Networks NS2 Datasheet

Category
WLAN access points
Type
Datasheet

Ubiquiti Networks NS2 is a powerful networking device that brings you many possibilities. It is equipped with Atheros 180MHz MIPS CPU, 16MB of RAM, and 4MB of Flash memory. It operates in 2.4GHz and supports 802.11b/g wireless standards. The device has a 10dBi dual-polarity antenna, which provides a wide coverage and strong signal. It also supports the use of external antennas via the RP-SMA connector, allowing you to extend the range and reach even further. NS2 is versatile and can be used in various scenarios. It is perfect for creating point-to-point and point-to-multipoint wireless connections, making it ideal for both indoor and outdoor use cases. It is commonly employed by network administrators to establish wireless networks in schools, offices, warehouses, and even entire neighborhoods.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI