Page is loading ...
APS08atH
802.3at 8 Port PoE Switch
Copyright 2009 Alfa Networks Inc. All Rights Reserved
Changes to specifications and descriptions may change at any time without prior notice
APS08atH is an 8 port 10/100 Ethernet switch
with all 8 PoE ports. It will automatically detect
the presence of an IEEE 802.3af/at compliant
powered device (PD) that will provide power
through the Ethernet port. The switch provides
up to 30W per PoE port and is used to power PoE
AP/Router, PoE IP phone, PoE IP Camera, or Alfa
PD-1000D with an non-PoE device.
APS08atH has the protection mechanism when
power consumption is overloaded. If all the PDs
power consumption is over 125W, the ports will
stop receiving power based on *priority of the
system. The lowest-priority port will be cut by the
system.
* Priority: Port 1 is higher than port 2 (port 1> port 2> port
3> port 4> port 5> port 6> port 7> port 8).
Product Features:
• Deliver Power up to 328ft (100m)
• Plug and Play installation
• Pass Through Data Rates :
8-Port 10/100 Mbps auto MDI/MDI-X
• Maximum 30W output power per
port
• Transmission Method: Store and
forward
A Closer Look:
Copyright 2009 Alfa Networks Inc. All Rights Reserved
Changes to specifications and descriptions may change at any time without prior notice
APS08atH
802.3at 8 Port PoE Switch
Standard
IEEE 802.3i 10BASE
-T
IEEE 802.3u 100BASE
-TX
IEEE 802.3x Flow Control
IEEE 802.3af & IEEE 802.3at
Interface
8 x 10/100Mbps RJ45 switch ports
Power Consumption
130W
LED Indicators
AC Power on,
Ethernet status Link/
Ack
PoE
Act/Status
AC Input Voltage
120 ~ 240VAC, 50 / 60Hz
AC Input Current
0.8A @ 100 ~ 240VAC
Temperature
Operating:
0°C ~ 40°C
Storage:
-10°C ~ 70°C
Unit Dimension
290 x 180 x 40mm (W x L x H)
Unit Weight
1.5kg
Application:
Technical Specifications:
/
