Opticis OVD-15 Datasheet

Category
Console extenders
Type
Datasheet

This manual is also suitable for

Opticis OVD-15 is a DVI distribution amplifier that allows you to split one digital DVI video source into five DVI displays. It supports resolutions up to WUXGA (1920x1200) at a 60Hz refresh rate and complies with DDWG1.0 standards. The built-in amplification function ensures signal distribution without any loss or digital noise. With Opticis DVI optical cables, M1-1000 or M1-1P0, at the both sides of input and output, DVI sources can be repeated and split. It's easy to install, just plug and play, and is certified by FCC and CE for EMI/EMC.

Opticis OVD-15 is a DVI distribution amplifier that allows you to split one digital DVI video source into five DVI displays. It supports resolutions up to WUXGA (1920x1200) at a 60Hz refresh rate and complies with DDWG1.0 standards. The built-in amplification function ensures signal distribution without any loss or digital noise. With Opticis DVI optical cables, M1-1000 or M1-1P0, at the both sides of input and output, DVI sources can be repeated and split. It's easy to install, just plug and play, and is certified by FCC and CE for EMI/EMC.

Copyright © 2006, All rights are reserved by Opticis Co., Ltd. April 15, 2006
www.opticis.com
SPIDER
TM
DVI 1:5 and 1:2 Distributors
Model Name: OVD15 & OVD12
Description
Opticis DVI Distribution amplifiers, named as OVD15 and OVD12, make one (1) digital DVI video
source split into five (5) or two (2) DVI displays, respectively. The built-in amplification function
enables DVI signal distribution without any signal loss or digital noise.
Features
z With Opticis DVI optical cables, M1-1000 or M1-1P0, at the both sides of input and output,
DVI sources can be made repeated and split.
z Supports up to WUXGA (1920x1200) resolution at 60Hz refresh ratio.
z Complies with DDWG1.0.
z Quick installation, working in a way of just plug and play.
z Certifies FCC and CE for EMI/EMC.
z Ships with one (1) +5V/1A or 2A power adaptor of wall-mount type AC plugs.
Technical Details
z Frequency Bandwidth: 1.65 Gbps (Single link)
z Supporting Graphic Resolution: Up to WUXGA (1920 x 1200) at 60Hz refresh ratio
z Input Connector: DVI-I 24p Female
z Output Connector:
OVD15: DVI-I 5 x 24p Female
OVD12: DVI-I 2 x 24p Female
z Dimensions (W X D X H):
OVD15: 370 X 120 X 34 mm; including foot rubber, 4mm height.
OVD12: 230 X 120 X 34 mm; including foot rubbers, 4mm height.
z Weight (Kg)
OVD15: 1.3 and OVD12: 0.9
Copyright © 2006, All rights are reserved by Opticis Co., Ltd. April 15, 2006
www.opticis.com
SPIDER
TM
z Power consumption: OVD15 : 4.3W, OVD12 : 2.7W
z Power supply: One (1) AC/DC 5V/1A power adaptor is included. Optionally, you have to
order 5V/2A power adaptor when you want to connect any active optical DVI cables, like
Opticis M1-1000 or M1-1P0 equivalents.
z DC power plug: Out diameter is 5.5mm (GND) and Inner diameter is 2.1mm (+5V).
Applications
z Home theaters with multiple displays.
z Information display in commercial or public sites.
z Control room display and education display.
PC or DVI source
OVD12 or OVD15
Monitor or Display
Form 2 to 5 ch.
  • Page 1 1
  • Page 2 2

Opticis OVD-15 Datasheet

Category
Console extenders
Type
Datasheet
This manual is also suitable for

Opticis OVD-15 is a DVI distribution amplifier that allows you to split one digital DVI video source into five DVI displays. It supports resolutions up to WUXGA (1920x1200) at a 60Hz refresh rate and complies with DDWG1.0 standards. The built-in amplification function ensures signal distribution without any loss or digital noise. With Opticis DVI optical cables, M1-1000 or M1-1P0, at the both sides of input and output, DVI sources can be repeated and split. It's easy to install, just plug and play, and is certified by FCC and CE for EMI/EMC.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI