Kingston Technology KVR21R15D4/16 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KVR21R15D4/16 is a 16GB DDR4-2133 CL15 SDRAM registered w/ parity, 2Rx4, ECC, memory module. It is designed for use in servers and other high-performance computing applications. The module features a 288-pin DIMM form factor and uses gold contact fingers. The module is compliant with the JEDEC DDR4 standard and supports data transfer rates of up to 2133 MT/s. The module also supports ECC error correction and detection, which helps to protect data from errors.

Kingston Technology KVR21R15D4/16 is a 16GB DDR4-2133 CL15 SDRAM registered w/ parity, 2Rx4, ECC, memory module. It is designed for use in servers and other high-performance computing applications. The module features a 288-pin DIMM form factor and uses gold contact fingers. The module is compliant with the JEDEC DDR4 standard and supports data transfer rates of up to 2133 MT/s. The module also supports ECC error correction and detection, which helps to protect data from errors.

DESCRIPTION
Document No. VALUERAM1447-001.A00 09/05/14 Page 1
SPECIFICATIONS
*Power will vary depending on the SDRAM used.
KVR21R15D4/16
16GB 2Rx4 2G x 72-Bit PC4-2133
CL15 Registered w/Parity 288-Pin DIMM
Continued >>
kingston.com
FEATURES
ValueRAM's KVR21R15D4/16 is a 2G x 72-bit (16GB)
DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/
parity, 2Rx4, ECC, memory module, based on thirty-six 1G x
4-bit FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each
288-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time 1x mode (tRFCmin)
Row Active Time (tRASmin)
Maximum Operating Power
UL Rating
Operating Temperature
Storage Temperature
15 cycles
47.05ns(min.)
260ns(min.)
33.00ns(min.)
TBD W*
94 V - 0
0
o
C to +85
o
C
-55
o
C to +100
o
C
Memory Module Speci cations
• Power Supply: VDD=1.2V (1.14V to 1.26V)
• VDDQ = 1.2V (1.14V to 1.26V)
• VPP - 2.5V (2.375V to 2.75V)
• VDDSPD=2.25V to 2.75V
• Functionality and operations comply with the DDR4 SDRAM datasheet
• 16 internal banks
• Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
• Data transfer rates: PC4-2133, PC4-1866, PC4-1600
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Supports ECC error correction and detection
• On-Die Termination (ODT)
• Temperature sensor with integrated SPD
• This product is in compliance with the RoHS directive.
• Per DRAM Addressability is supported
• Internal Vref DQ level generation is available
• Write CRC is supported at all speed grades
• DBI (Data Bus Inversion) is supported(x8)
• CA parity (Command/Address Parity) mode is supported
Document No. VALUERAM1447-001.A00 Page 2
MODULE DIMENSIONS
kingston.com
Back
Front
  • Page 1 1
  • Page 2 2

Kingston Technology KVR21R15D4/16 Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KVR21R15D4/16 is a 16GB DDR4-2133 CL15 SDRAM registered w/ parity, 2Rx4, ECC, memory module. It is designed for use in servers and other high-performance computing applications. The module features a 288-pin DIMM form factor and uses gold contact fingers. The module is compliant with the JEDEC DDR4 standard and supports data transfer rates of up to 2133 MT/s. The module also supports ECC error correction and detection, which helps to protect data from errors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI