Autoreturn
www.draperinc.com | 1-800-238-799932
Manual Wall-Mounted Projection Screens
FEATURES
• The Silhouette’s case conceals everything:
mounting fixtures, fasteners, and even the
dowel retracts inside the case
• The innovative case installs cleanly, and the
front fascia removes easily for access to the
inside components.
• Its slender fascia and endcaps are made of
gently radiused aluminum and presents a
strikingly modern appearance.
• There is no need to conceal the
Silhouette—it will complement the other
high-tech equipment in your room.
Silhouette/Series M—is spring-roller
operated. Your choice of a conventional
viewing surface: Matt White, Glass Beaded
or High Contrast Grey.
Silhouette/Series C—is operated by a slim,
polished aluminum crank, which may be
detached for storage. Features Draper’s
Tab Tensioning System for a perfectly flat
projection surface. Choose M1300, M2500,
HiDef Grey or Cineflex rear projection
viewing surface. See page 10 for more on the
benefits of Tab Tensioning.
OPTIONS
• AutoReturn Roller—The screen unrolls in
the conventional manner, then slowly and
gently retracts after a simple tug on the
handle. See lower left for more details.
• Case Finishes—Choose a white (standard),
black or dove grey lightly textured finish
(see samples shown on the left)
• Extra Drop—Up to 8´ overall height, either
white or black (White is standard for Series
M in AV format. Black is standard for
Series M in all other formats and for all
Series C screens).
• Black Masking Borders—Borders are
optional for Series M in AV format. Borders
are standard for Series M in all other
formats and for all Series C.
SIZES AND FORMATS
AV Format from 50˝ x 50˝ to 96˝ x 96˝
NTSC Format from 6´ to 10´ diagonal
HDTV Format from 65˝ to 106˝ diagonal
16:10 Format from 67˝ to 109˝ diagonal
WideScreen Format in 99˝ or 108˝ diagonal
Custom sizes available.
Full details available at:
www.draperinc.com/go/SilhouetteM.htm
www.draperinc.com/go/SilhouetteC.htm
U.S. Patent No. 5,296,964 and 6,111,694.
Silhouette/Series C
Silhouette Serie S
WITH A HIGH-TECH APPEARANCE
Silhouette/Series M
INTRODUCING AN IMPORTANT NEW
IMPROVEMENT IN SPRING ROLLER DESIGN
Now available as an optional upgrade on selected
models of Draper wall- and ceiling-mounted
screens, the AutoReturn spring roller includes a
built-in inertia reduction mechanism. With AutoReturn the screen unrolls in the
conventional manner, then slowly and gently retracts to the closed position
on its own after a simple tug on the handle. AutoReturn is available on Salara/
Series M, Silhouette/Series M, Access/Series M, Luma 2, and Luma.
Patent Pending.
-
1
Draper 202297 Datasheet
- Category
- Projection screens
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
