Manhattan 172592 Datasheet

Category
RAID controllers
Type
Datasheet

Manhattan 172592 SATA PCI Host Adapter is a versatile device that allows you to connect multiple SATA storage devices to your computer. With four SATA ports, you can easily access and manage your data, whether it's stored on hard drives, SSDs, or optical drives.

This adapter is also RAID-capable, which means you can create redundant arrays of disks to improve performance and data protection. It supports a variety of RAID levels, including RAID 0, RAID 1, RAID 0+1, and RAID 1+S, so you can choose the configuration that best meets your needs.

The Manhattan 172592 is also incredibly flexible. It comes with both regular and low-profile brackets, so you can install it in a wide range of computer cases. It also supports Spread Spectrum in the receiver, which helps to reduce electromagnetic interference.

Manhattan 172592 SATA PCI Host Adapter is a versatile device that allows you to connect multiple SATA storage devices to your computer. With four SATA ports, you can easily access and manage your data, whether it's stored on hard drives, SSDs, or optical drives.

This adapter is also RAID-capable, which means you can create redundant arrays of disks to improve performance and data protection. It supports a variety of RAID levels, including RAID 0, RAID 1, RAID 0+1, and RAID 1+S, so you can choose the configuration that best meets your needs.

The Manhattan 172592 is also incredibly flexible. It comes with both regular and low-profile brackets, so you can install it in a wide range of computer cases. It also supports Spread Spectrum in the receiver, which helps to reduce electromagnetic interference.

SATA PCI Host Adapter
SATA 150 RAID
Model
172592
Easily access external and internal SATA storage
devices.
Supporting both low-profile and regular-size PCI designs, the MANHATTAN
®
SATA PCI Host
Adapter can upgrade your desktop computer to have four serial ATA RAID channels. The board
provides a 32-bit, 33/66 MHz PCI interface on the host side and fully compliant serial ATA
ports on the device side to access serial ATA storage media such as hard disk drives, zip
drives, CD-ROMs, CD-RWs and DVD-ROMs.
A Wide Range of Options
The SATA RAID PCI Host Adapter comes with regular and low-profile PCI brackets. This allows it to fit into
a wide variety of cases. MANHATTAN also offers a wide variety of setup options. If the BIOS is not
configured for RAID, the SATA RAID PCI Host Adapter will operate as a standard SATA host controller. If
RAID is enabled, it offers a wide range of options, including RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1
(mirrored-stripping) and RAID 1+S (Mirrored-Sparing) to improve the data performance and provide data
redundancy and rebuilding.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all MANHATTAN products. All items
carry a full Lifetime Warranty the strongest quality commitment anyone can make.
Features
RAID Level 0 (striping) increases sustained data transfer rates
RAID Level 1 (mirroring) places an identical data copy on
another drive
RAID Level 0+1 (mirrored-striping) offers the best performance
and fault-tolerant data redundancy
RAID 1+S (mirrored-sparing) can automatically replace the failed
drive and rebuild the system when booting HDD fails
Independent 256-byte FIFOs per SATA channel for host reads
and writes
Integrated PCI DMA engines
4-pin header on board for LED connection
Acts as non-RAID when not BIOS congured
Lifetime Warranty
Specifications
STANDARDS AND CERTIFICATIONS
• FCC
• CE
• SATA 1.0a
• PCI 2.2
PORTS
• 4 SATA (internal)
• Connection: L-type
• Transfer rate: 1.5 Gbps
GENERAL
• Supports Spread Spectrum in receiver
• Supports ATAPI commands
• 48-bit LBA for support of HDD larger than 137 GB
• 4-pin header for LED connection
• Independent 256-byte FIFOs per channel
• Integrated PCI DMA engines
• 32-bit, 33/66MHz PCI support
• Chipset: SiI3114
SYSTEM REQUIREMENTS
• Compatible with Windows XP/Vista/7
• Available PCI Card slot
• CD-ROM drive
PACKAGE CONTENTS
• SATA RAID PCI Controller Card
• Regular and low-prole brackets
• User manual and driver CD
Model
172592
MH-172592-DS-0109-02
Copyright © MANHATTAN
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
For more information on MANHATTAN products, consult your
local dealer or visit
www.manhattan-products.com
.
  • Page 1 1
  • Page 2 2

Manhattan 172592 Datasheet

Category
RAID controllers
Type
Datasheet

Manhattan 172592 SATA PCI Host Adapter is a versatile device that allows you to connect multiple SATA storage devices to your computer. With four SATA ports, you can easily access and manage your data, whether it's stored on hard drives, SSDs, or optical drives.

This adapter is also RAID-capable, which means you can create redundant arrays of disks to improve performance and data protection. It supports a variety of RAID levels, including RAID 0, RAID 1, RAID 0+1, and RAID 1+S, so you can choose the configuration that best meets your needs.

The Manhattan 172592 is also incredibly flexible. It comes with both regular and low-profile brackets, so you can install it in a wide range of computer cases. It also supports Spread Spectrum in the receiver, which helps to reduce electromagnetic interference.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI