Page is loading ...
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: January 28, 2022 3:27 PM
Product Diagram (KEYBOARD-TRAY-CLAMP1)
Component Function
1Desk Clamp, Left • Attach the Keyboard Tray to the Desk
2Keyboard Tray • Place a keyboard and a mouse on the Keyboard Tray
3Desk Clamp, Right • Attach the Keyboard Tray to the Desk
4Clamp Knob • Turn by hand to secure the Clamp to the Desk
5Height Adjustment L
Bracket
• Adjust the height between the Desk and the
Keyboard Tray
• Attach the Keyboard Tray to the Desk Clamp
Package Contents
• Keyboard Tray x 1
• Height Adjustment Screws x 5
• Tray Mounting Screws x 5
• Height Adjustments L Brackets x 2
• Desk Clamp Left x 1
• Desk Clamp Right x 1
• Quick-star Guide x1
Desk Clamp Keyboard Tray
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.startech.com/KEYBOARD-TRAY-CLAMP1
• Phillips Head Screwdriver
Installation
WARNING!
Do not exceed the weight capacity of this product. Overloading this product might
result in injury or property damage. This product can support the following weight: up
to 11.8 kg (26 lbs).
Ensure the mounted Keyboard Tray is properly secured to the Desk before use.
Attach the Desk Clamp to the Height Adjustment L
Brackets
1. Determine the desired height between the Desk and the Keyboard Tray: 100,
120, or 140 mm (3.9, 4.7, or 5.5 in). Each row of holes on the Height Adjustment
L Bracket are spaced 20 mm apart. The row of holes, located closest to the bend
of the Height Adjustment L Brackets, provides the minimum height adjustment
setting of 100 mm (3.9 in).
2. Secure the Height Adjustment L Bracket to the Desk Clamps using the Height
Adjustment Screws (x2 shorter screws) and tighten using a Phillips Head
Screwdriver to complete the rst Desk Clamp Assembly (Figure 1).
3. Repeat steps 2 and 3 to install the second Desk Clamp Assembly
Attach the Desk Clamp Assemblies to the Keyboard Tray
1. Flip the Keyboard Tray upside down and align the mounting holes located on
3
12
5
4
Figure 1
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of
third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual
and related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a 2-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price
paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
either side of the Keyboard Tray with the bottom of the Desk Clamp Assembly.
(Figure 2).
2. Secure the Desk Clamp Assembly to the Keyboard Tray using the Tray
Mounting Screws (x2) and tighten using a Phillips Head Screwdriver.
3. Repeat steps 2 and 3 to attach the second Desk Clamp Assembly. This
completes the Keyboard Tray Assembly.
Attach the Keyboard Tray Assembly to the Desk
1. Open the Desk Clamps rotating the Clamp Knobs counterclockwise. The Desk
Clamps can accommodate Desks measuring up to 59 mm (2.3 in) thick.
2. Slide the Desk Clamps over the edge of the Desk.
3. Tighten the Desk Clamps by rotating the Clamp Knobs clockwise.
Figure 2
/