D+H Montage ZA Operating instructions

Hello! I have analyzed the Mounting Information document for the Rack and Pinion Drive installation on a pivot-hung window. This document details the mounting process using ZK6 and FK-D brackets, with a focus on the weight of the window. I'm ready to assist you with questions about the installation process.
What is the document about?

What is the weight of 1mm thick glass?

What brackets are used in the assembly?

99.950.48 1.2/05/03

Mounting Information

D+H Mechatronic AG • Georg-Sasse-Str. 28-32 • D-22949 Ammersbek • Tel. +4940-60565219 • Fax +4940-60565264

FK-D

ZK6

FK-D

ZK6

Rack and Pinion Drive on a Pivot-Hung Window,

opening outward

in connection with brackets ZK6 and FK-D

Attention

Observe weight of window wing including glass!

(Glass of 1mm strength has a weight of 2,5kg/m²)

Pivot-hung window closed Pivot-hung window open

Observe

slewing range