Continental NH3 A-MVD User manual

A-MVD

We are very pleased to introduce to you our new and improved MVD manifold system. You now have two options

to choose from. You can purchase a 16 outlet manifold and plug the outlets you don’t need or get it with the exact

number of outlets you require. If having extra outlets available to you later purchase the 16 outlet manifolds but if

a custom look is what you’re looking for buy one with the exact number of outlets you need. Availability is

usually a day on custom made systems.

TO DETERMINE MANIFOLD SIZE USE THE FORMULA BELOW

Tool bar width in feet X Speed X lbs. N per acre X .1212 = Total lbs N per hour.

Then taking your Total lbs N per hour and dividing it by your total number of outlets on the

bar will get you pounds of N per outlet. Then use the chart below to determine which

manifold you need.

RATE RANGE HOSE BARB SIZE PART NUMBER

20 to 150 .lbs N per outlet 3/8” A-MVD-16A120

20 to 150 .lbs N per outlet 1/2" A-MVD-16B120

150 and up .lbs N per outlet 3/8” A-MVD-16A201

150 and up .lbs N per outlet 1/2" A-MVD-16B201

130 Yorktown, Dallas TX 75208 800-537-5642 214-761-9549 214-741-6081

•No need for custom ordering

•2 sizes fits most applications

•Optional custom made to the exact outlets

you need or 16 outlets, just plug what you

don’t need

•Distribution accuracy as close as 6 percent

from the mean average

•Comes with 3/8” or 1/2” outlets

•1” female inlet or optional 1” hose barb inlet

available.

•3-8 port splitters for small and large tool bars

•No moving parts