SMARDY PRO 203 User manual

Filtration system

Instruction manual EN

Contents

1. Unpacking

2. Scope of supply

3. Insertion of the filters

4. Installation

5. First commissioning

6. Consumables

7. Technical data

8. Filter order

9. Filter change

1. Unpacking

Remove all packaging material. Make sure that the filtration system does not show

any external damage.

2. Scope of supply

1. smardy PRO 203

2. CTO filter

3. UDF filter

4. PP filter

5. Replacement seal

6. Replacement hose

7. Key for filter housing

3. Insertion of the filter

Attention !

When installing, please pay attention to the following point: The unit must not be

operated with hot water, behind a pressureless boiler or shower hose armature.

• The housing is unscrewed counterclockwise with the key.

• Remove the packaging film of the filter.

• Now insert the filter into the housing.

• Screw down the housing counterclockwise. Attention! When closing, the housing

seal must not cant.

Activated carbon filter Granular carbon filter Sediment filter

4. Installation

•Please connect the hose line as follows

With the black lever you can choose whether the tap water should flow directly to the

filter system (position lever upwards) or as normal tap water (position lever

downwards) through the universal adapter.

1. Remove sieve

2. Screw in the thread adapter

3. Screw on the universal adapter

5. First commissioning

Before you open the water supply, please double-check all the hose lines.

These must have been laid absolutely free of kinks.

• The filter system is turned upside down, the lever on the diverter valve is brought to

the horizontal position and the water tap is opened.

• Water flows through the filter and the air inside the housing will be totally displaced.

• The unit can be checked for possible leaks. If required, the connections between the

hose, water tap and filter can be retightened.

• Let the water run through the filter for approx. 10 minutes. The filter can now be

placed on it’s base.

• Your smardy PRO 203 is now ready for operation and you can enjoy fresh osmosis

water.

6. Consumables

For your system you need the following replacement filters and membranes:

item N°

Description

Change interval

N° 4

Activated carbon filter

Every 6 months

Daily output

up to 2.000 L

N° 5

Granular carbon filter

Every 6 months

N° 6

Sediment filter

Every 6 months

Just smardy original ﬁlters ensure a trouble-free functioning!!

7. Technical data

• Dimensions: 44cm x 13cm 33cm (LxWxH)

• Daily output: 2000 Liter

• Water purification without electricity – only 3 bar tap water pressure required

8. Filter order

9. Filter change

Recommended change interval

N° 4 6 months

N° 5 6 months

N° 6 6 months

Date: