Page is loading ...
A. Drive Wheel
B. Magnetic Lever
C. "ON" Lever
D. Cutting Blade
E. Grinding Stone
F. Bottle Opener
G. Cord storage
A
C
D
E
F
G
B
<GB>
<GB>
12
IMPORTANT SAFETY INSTRUCTIONS:
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of electric shock, personal injury
and fire. Read all these instructions carefully before using, and save
for future reference .
1. Close supervision is required when any appliance is used by or near children.
2. To protect against electric shock, never immerse any appliance, the mains lead
or plug in water or any other liquid.
3. Ensure hands are dry before operating the switch or turning off at the mains.
4. Ensure the lever is up in the OFF position before connecting to the mains
power supply.
5. Do not carry the appliance by the cord or pull the cord to remove the plug from the
socket.
6. The supply cord cannot be replaced, If the cord is damaged the appliance should
be scrapped.
7. Unplug from the mains socket when not in use and before cleaning .
8. Always disconnect the appliance from the mains supply if it is left unattended.
9. Keep the appliance and cable away from sources of heat, sharp objects
or anything that may cause damage.
10.Do not use outdoors. This appliance is designed for domestic household use only.
11.Do not open pressurized (aerosol-type) cans.
12.Do not open cans of flammable liquids such as lighter fluids.
13.The use of an attachment not recommended or sold by the appliance manufacturer
may cause fire, electric shock or injury.
14.Keep Hands away from rotating cans during operation. Pay attention to the
sharp edge of lid when you take it out from magnetic lever and throw it away.
15.Cutting blade is sharp. Handle carefully when removal from housing, refitting
and cleaning.
16.Always disconnect the appliance from the mains supply before opening bottles or
sharpening knives.
17.Do not use appliance for other than intended HOUSEHOLD USE. Use the
appliance for opening normal quantities of cans for household use. Make sure
for every 5 times can opening operating (each operation should have
minimum rest time of 20 seconds), let the appliance cool down for approx 5
minutes before using it again.
18.No responsibility will be taken for any possible damages resulting from wrongful
handling or operation.
19.Keep the instruction manual in a safe place. If passing on the appliance to a
third party, always include the instruction manual.
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from your
household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
KEEP THESE INSTRUCTION
Hints:
- If there is a bump, dent, or heavy seam in the rim of the can, open
the other end of the can or start cutting just beyond the problem
area.
- To use the cord storage at the back of can opener, push in or
pull out the cord as needed.
How to use the knife sharpener:
1. Place cutting edge of knife in the knife slot located on the back of
the can opener. (Fig.6 )
2. Draw the knife blade through the slot several times.
CAUTION: ALWAYS DISCONNECT THE APPLIANCE FROM THE
MAINS SUPPLY BEFORE SHARPENING KNIVES.
Note:
Serrated blades should never be inserted into this appliance.
How to use the bottle opener:
1. To use the bottle opener (Fig.6), positioned under the bottle opener,
Always grip the bottle and lift up the housing with the
other hand for operation. This will avoid spillages.
CAUTION: ALWAYS DISCONNECT THE APPLIANCE FROM THE
MAINS SUPPLY BEFORE OPENING BOTTLE.
Cleaning and Maintenance
- This appliance is virtual maintenance free, no lubrication is
needed. This appliance has no user serviceable parts. No
repairs should be attempted by the user.
- Before cleaning, always disconnect from the mains supply.
- Pull the "ON" lever (C) up fully. Slide the lever out and remove
from the housing. (Fig.5) Refitting in reverse sequence with lever in
up position.
- Wash the cutting blade (D) and the "ON" lever (C) in soapy water.
- You can clean with a damp cloth. Do not use abrasive cleaning materials,
Polishers, etc.
- Do not clean in a dishwasher.
- Do not immerse the housing in water.
3
INSTRUCTIONS FOR USE
How to open the can:
1. Locate the drive wheel (A) under the rim against the can. (Fig.1)
2. Plug cord into the mains socket.
3. Push the magnetic lever (B) downwards with your thumb to
attract the can top surface. (fig.2)
4. Press the "ON" lever (C) with the cutting blade (E) penetrating
into the can automatically. Hold the can opener in such a way,
until can makes one full rotation totally separating lid from can.
The can will not drop from the opener as long as the lever is in a
downward position. (fig.3)
5. Lift the "ON" Lever (C) up so that the lid can be removed. (Fig.4)
Be sure to have your hand on the can at this time or it will tip over.
Instructions for use
MCO100
/
