Omega Lift Equipment RCOM100 Owner's manual

Category
Office & computer chairs
Type
Owner's manual

Omega Lift Equipment RCOM100 is a racing chair designed for comfort and functionality. It features adjustable seat back inclination and seat height, allowing you to customize your seating position for optimal comfort. The sturdy construction and durable materials ensure stability and longevity, making it suitable for extended use. Whether you're a professional racer or simply enjoy the thrill of gaming, the Omega Lift Equipment RCOM100 provides an immersive and engaging experience.

Omega Lift Equipment RCOM100 is a racing chair designed for comfort and functionality. It features adjustable seat back inclination and seat height, allowing you to customize your seating position for optimal comfort. The sturdy construction and durable materials ensure stability and longevity, making it suitable for extended use. Whether you're a professional racer or simply enjoy the thrill of gaming, the Omega Lift Equipment RCOM100 provides an immersive and engaging experience.

RACING CHAIR
Model
RCOM100
Printed in Taiwan
RCOM100-M4_052014
SFA Companies
www.omegalift.com
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Operating Instructions & Parts Manual
© May 2014
2
ASSEMBLY BREAKDOWN
M8 * 7 PCS WASHER
M8 * 20MM * 3 PCS
5/16" * 25MM * 4PCS
1/4" * 3/4" BOLT * 6 PCS
6MM * 1 PCS
SPRING WASHER * 4 PCS`
BACK CUSHION * 1 PCS
HANDLEBAR * 1 PCS
M8 WASHER * 3PCS
M8 * 20MM * 3 PCS
SEAT * 1 PCS
M8 WASHER * 3 PCS
PLATE * 1 PCS
SPRING WASHER * 4 PCS
5/16" * 25MM BOLT * 4 PCS
DUST COVER * 1 PCS
GAS HEIGHT
ADJUSTMENT * 1 PCS
CHAIR LEGS * 1 PCS
HANDLEBAR * 1 PCS
1/4" * 3/4" BOLT * 6 PCS
1
2
9
10
4
9
5
14
11
6
7
8
12
3
9
10
11
12
13
14
3
ASSEMBLY INSTRUCTIONS
A
Attach the #2 left handlebar on the #4 seat, secure with screw-
driver.
B
Repeat the same process to assemble the #3 right handlebar on
the #4 seat.
C
Assemble #7 gas height adjustment with #6 dust cover and then
insert into #5 plate.
D
Fix the #5 plate and #4 seat sets using #9 washer and #14 spring
washer with #11 bolt.
E
Assemble the #1 back cushion and #4 seat with bolt #10 and
washer #9 x 3 pcs by #13 hex key wrench.
F
Fix the #8 chair legs with #4 seat sets.
4
OPERATING INSTRUCTIONS
SEAT BACK INCLINATION ADJUSTMENT
A
This picture shows the position of the
control shaft for seat back angle adjust-
ment. In normal situations, it is located at
the level as the picture indicates.
B
Pull the control shaft outward to release
the seat back.
C
Change the seat back angle by leaning
back to the desired position. Push the
control shaft back in to lock the seat back
in this position.
D
This picture shows the locked position
after seat back angle adjustment.
A
This picture shows the position of the seat
up/down control shaft. It is the same con-
trol shaft that adjusts the seat back angle.
B
Raise the seat by rotating the control shaft
clockwise upward without any body weight
on the seat. The seat will not raise if there
is body weight on it.
C
Lower the seat by rotating the control
shaft clockwise upward while seated.
Release the control shaft when the desired
position is achieved.
AB
C
AB
CD
5
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies, Inc. will repair or replace, at its option,
without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This
limited warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product,
freight prepaid, to SFA Companies, Inc. Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO
64153.
Except where such limitations and exclusions are specically prohibited by applicable law,
(1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF
DEFECTIVE PRODUCTS AS DESCRIBED ABOVE.
(2) SFA Companies, Inc. SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER.
(3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR,
OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
(4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS
THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also
have other rights, which vary from state to state.
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
888-332-6419
REPLACEMENT PARTS
Individual replacement parts are not available for this product. For questions call or write: SFA Companies 10939
N. Pomona Ave. Kansas City, MO 64153, U.S.A.
e-mail: [email protected]; Tel: (888) 332-6419 Fax: (816) 891-
6599; Website: http://www.omegalift.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Omega Lift Equipment RCOM100 Owner's manual

Category
Office & computer chairs
Type
Owner's manual

Omega Lift Equipment RCOM100 is a racing chair designed for comfort and functionality. It features adjustable seat back inclination and seat height, allowing you to customize your seating position for optimal comfort. The sturdy construction and durable materials ensure stability and longevity, making it suitable for extended use. Whether you're a professional racer or simply enjoy the thrill of gaming, the Omega Lift Equipment RCOM100 provides an immersive and engaging experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI