Eurotech CPU-161-17 Owner's manual

CPU

-161-17

COM Express Compact Module (Type 6)

USER MANUAL

Rev.

0-2 – 16 June 2017 – CPU-161-17 _UserMan_EN_0-2 – ENGLISH

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

Intended audience

This document is intended for system integrators, who are skilled persons with a thorough knowledge in

bringing together component subsystems into a whole, ensuring that those subsystems function together.

Disclaimer of liability

Eurotech has reviewed the contents of this document to ensure accuracy and consistency with the hardware

and software described.

Always refer to the latest available manual revision available at: www.eurotech.com.

Revision history

Revision

Description

Date

0-1

First release

31 March 2017

0-2

Minor updates

16 June 2017

CPU-161-17 User Manual 0-2 Contents

3 /

46

CONTENTS

Contents ...................................................................................................................................................................... 3

1 Safety Instructions ............................................................................................................................................. 5

1.1 Safety signals used in this document ....................................................................................................... 5

1.2 Residual risks and placement of safety signals ....................................................................................... 6

1.3 Observe antistatic precautions ................................................................................................................ 7

1.4 Connect power supply correctly ............................................................................................................... 7

2 How to receive Technical Assistance............................................................................................................. 9

2.1 How to receive technical support ............................................................................................................. 9

2.2 How to return a product to Eurotech........................................................................................................ 9

3 Declaration of conformity ............................................................................................................................... 11

3.1 CE Marking ............................................................................................................................................ 11

3.2 WEEE compliance ................................................................................................................................. 11

3.3 RoHS compliance .................................................................................................................................. 11

4 Before using the product ................................................................................................................................ 12

5 Product specifications .................................................................................................................................... 13

5.1 Features ................................................................................................................................................. 15

5.1.1 Watchdog Timer .................................................................................................................... 15

5.1.2 DDR3L ................................................................................................................................... 15

5.1.3 Graphics ................................................................................................................................ 15

5.1.4 Serial ATA ............................................................................................................................. 15

5.1.5 Gigabit LAN ........................................................................................................................... 15

5.1.6 USB ....................................................................................................................................... 15

6 Concept ............................................................................................................................................................. 16

6.1 COM Express Module Standards .......................................................................................................... 16

6.2 Specification Comparison Table ............................................................................................................ 17

7 Hardware Installation ....................................................................................................................................... 19

7.1 Board Layout ......................................................................................................................................... 19

7.2 Block Diagram ....................................................................................................................................... 20

7.3 Mechanical Diagram .............................................................................................................................. 21

7.3.1 Heat Sink (included in the Development Kit) ........................................................................ 21

7.3.2 CPU Module .......................................................................................................................... 22

7.4 System Memory ..................................................................................................................................... 23

7.4.1 How to install the SODIMM Modules .................................................................................... 24

7.5 Power ON LED ...................................................................................................................................... 25

7.6 Connectors ............................................................................................................................................ 26

7.6.1 CPU Fan Connector .............................................................................................................. 26

7.6.2 COM Express Connector ...................................................................................................... 27

7.6.3 COM Express Connector Signal Description ........................................................................ 30

7.7 Heatsink (included in the Development Kit) .......................................................................................... 37

7.8 Installing the CPU-161-17 onto a Carrier Board .................................................................................... 38

8 BIOS Setup Utility ............................................................................................................................................ 40

8.1 Overview ................................................................................................................................................ 40

8.1.1 Default Configuration ............................................................................................................ 40

8.1.2 How to enter the BIOS Setup Utility ...................................................................................... 40

Contents CPU-161-17 User Manual 0-2

4

/ 46

8.1.3 Keys function ......................................................................................................................... 41

8.1.4 Scroll bar function.................................................................................................................. 41

8.1.5 The Submenu symbol ........................................................................................................... 41

Troubleshooting ....................................................................................................................................................... 42

Troubleshooting Checklist................................................................................................................................ 42

Monitor/Display ................................................................................................................................................ 42

If the display screen remains dark after the system is turned on: ....................................................... 42

The picture seems to be constantly moving. ....................................................................................... 42

The screen seems to be constantly wavering. .................................................................................... 42

Power Supply ................................................................................................................................................... 42

When the computer is turned on, nothing happens............................................................................. 42

Hard Drive ........................................................................................................................................................ 43

Hard disk failure. .................................................................................................................................. 43

Excessively long formatting period. ..................................................................................................... 43

Serial Port ........................................................................................................................................................ 43

The serial device (modem, printer) doesn’t output anything or is outputting garbled characters. ...... 43

Keyboard .......................................................................................................................................................... 43

Nothing happens when a key on the keyboard was pressed. ............................................................. 43

System Board .................................................................................................................................................. 43

Notes ......................................................................................................................................................................... 45

CPU-161-17 User Manual 0-2 Safety Instructions

5 /

46

1 SAFETY INSTRUCTIONS

CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS CONTAINED IN THIS DOCUMENT

BEFORE INSTALLING / OPERATING THE PRODUCT.

KEEP THIS DOCUMENT FOR FUTURE REFERENCE.

Whenever you have any doubt regarding the correct understanding of the instructions contained in this

document contact your local Eurotech Technical Support Team (see the last page of this document for

further details).

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the following

precautions, as well as using good technical judgment, whenever installing / operating the product.

Failure to comply with these instructions or with specific warnings elsewhere in this document violates

safety standards of design and manufacture, and intended use of the product.

Eurotech assumes no liability for any failure to comply with these instructions.

1.1 Safety signals used in this document

DANGER

INDICATES A HAZARD WITH A HIGH LEVEL OF RISK WHICH, IF NOT AVOIDED, WILL

RESULT IN DEATH OR SERIOUS INJURY

WARNING

INDICATES A HAZARD WITH A MEDIUM LEVEL OF RISK WHICH, IF NOT AVOIDED, COULD

RESULT IN DEATH OR SERIOUS INJURY

CAUTION

INDICATES A HAZARD WITH A LOW LEVEL OF RISK WHICH, IF NOT AVOIDED, COULD

RESULT IN MINOR OR MODERATE INJURY

NOTICE

Indicates practices not related to personal injury, such as:

• An instruction to follow to use the product effectively

• A statement of company policy related to product or property protection

Safety Instructions CPU-161-17 User Manual 0-2

6

/ 46

1.2 Residual risks and placement of safety signals

The following safety signal is placed on the product to highlight the residual risks that still exist.

Ref #

Warning signal

Meaning

1

HOT SURFACE - BURN HAZARD - DO NOT TOUCH

Heatsink is hot while the product is turned ON.

DO NOT touch it.

Always allow the heatsink to cool before servicing the product

1

CPU-161-17 User Manual 0-2 Safety Instructions

7 /

46

1.3 Observe antistatic precautions

NOTICE

PREVENTING ELECTROSTATIC DISCHARGE (ESD)

When handing the product described in this document, always use appropriate

antistatic precautions to avoid damages due to electrostatic discharge.

For example: use a wrist strap or ESD cuff kept in constant contact with bare

skin and attached to an ESD ground.

1.4 Connect power supply correctly

WARNING

ELECTRIC SHOCK HAZARD

Failure to supply power correctly, or failure to follow all operating instructions correctly, may

create an electric shock hazard, which could result in personal injury or loss of life, and / or

damage to equipment or other property.

To avoid injuries:

• Do not perform any connections with wet hands

• Check any power cords for damage before using them

• Use certified power cables. The power cables must meet the power requirements of the

device

•

Position cables with care. Avoid positioning cables in places where they may be trampled

or compressed by objects placed on them

• Take particular care of plugs, power-points and outlets. Avoid overcharging them

• Before applying power, thoroughly review all installation, operation, and safety

instructions

• Before operating any equipment, carefully read any supplied instructions

• Always disconnect power and discharge the circuits before touching them

• Only start the product with a power supply that meets the requirements stated on the

voltage label. In case of uncertainties about the required power supply, contact the

Eurotech Technical Support Team (see the back cover for full contact details) or the

electricity authority.

(This page has been intentionally left blank)

CPU-161-17 User Manual 0-2 How to receive Technical Assistance

9 /

46

2 HOW TO RECEIVE TECHNICAL ASSISTANCE

2.1 How to receive technical support

If you have a technical question, or if you cannot isolate a problem with your product, or if you have

any inquiry about repair and returns policies, complete the following steps:

1. Go to the Eurotech Global Support Center: https://support.eurotech.com/

2. Submit a support request.

You will receive a reply from your Support Team with the information you required.

2.2 How to return a product to Eurotech

To return a product to Eurotech complete the following steps:

1. Go to the Eurotech Global Support Center: https://support.eurotech.com/

2. Submit an RMA request.

You will receive a reply from the Eurotech RMA Department. It will contain:

o The RMA number

o The shipping information

3. Pack the product using anti-static material and place it in a sturdy box with enough packing material to

adequately cushion it

4. Ship the product to Eurotech following the information received from the Eurotech RMA

Department.

NOTICE

Any product returned to Eurotech that is found to be damaged due to inappropriate packaging

will not be covered by the warranty.

(This page has been intentionally left blank)

CPU-161-17 User Manual 0-2 Declaration of conformity

11 /

46

3 DECLARATION OF CONFORMITY

3.1 CE Marking

This product is CE marked.

The product meets the guidelines listed in the following sections.

Eurotech is not responsible for the use of this product together with equipment (e.g. power

supplies, personal computers, etc.) that are not CE marked and compliant with the

requirements specified in this document.

3.2 WEEE compliance

In compliance with the Directive 2012/19/EU of the European Parliament and of the Council

of 4 July 2012 on waste electrical and electronic equipment (WEEE), the symbol on the

right, shown on the product or within its literature, indicates separate collection for this

electrical and electronic equipment (EEE) that has been placed on the market after 2005.

This product, at the end of its life cycle, must be collected separately and managed in

accordance with the provisions of the current Directive on waste electrical and electronic

equipment.

Because of the substances present in the product, improper use or disposal of the refuse

can cause damage to human health and the environment.

To avoid any possible legal implications, contact your local waste collection body for full

recycling information.

3.3 RoHS compliance

The product described in this document, including all its components and its sub-assemblies, have

been manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the

Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and

electronic equipment.

Before using the product CPU-161-17 User Manual 0-2

12

/ 46

4 BEFORE USING THE PRODUCT

Before using the product:

• Install the Heat Sink (sold separately)

• Setup the following components:

o RAM module

o Storage devices (for example a hard disk drive)

o Keyboard

o Mouse

o Display.

CPU-161-17 User Manual 0-2 Product specifications

13 /

46

5 PRODUCT SPECIFICATIONS

(continued on next page)

Specifications

Description

System

Processor

6th Generation Intel

®

Core

TM

Processors, BGA 1356

Intel

®

Core

TM

i7-6600U Processor, Dual Core, 4M Cache, 2.6GHz (3.4GHz), 15W

Intel

®

Core

TM

i5-6300U Processor, Dual Core, 3M Cache, 2.4GHz (3.0GHz), 15W

Intel

®

Celeron

®

Processor 3955U, Dual Core, 2M Cache, 2.0GHz, 15W

Memory

Two 204-pin SODIMM up to 16GB

Dual Channel DDR3L 1600MHz

Graphics

Controller

Intel

®

HD Graphics GT Series

Feature

OpenGL 5.0, DirectX 12, OpenCL 2.1

• HW Decode:

o AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H265, VP8, VP9

• HW Encode:

o AVC/H.264, MPEG2, JPEG, HEVC/H265, VP8, VP9

Display

1x VGA

1x LVDS

1x DDI

VGA: Resolution up to 2560x1600 @ 60Hz

LVDS: Dual channel 24-bit, resolution up to 1920x1200 @ 60Hz

HDMI: Resolution up to 4096x2160 @ 24Hz or 2560x1600 @ 60Hz

DP++: Resolution up to 4096x2304 @ 60Hz

Triple

displays

VGA + LVDS + DDI

Expansion

Interface

5x PCIe x1, or

4x PCIe x1 + 1x PCIe x4, or

3x PCIe x1 + 2x PCIe x2

(up to 5 Devices and 8 Lanes, Gen 3)

1x LPC

1x I2C

1x SMBus

2x UART (TX/RX)

Audio

Interface

HD Audio

Ethernet

Controller

1x Intel

®

I219LM with iAMT11.0 PCIe (10/100/1000Mbps)

(only Core i7/i5 supports iAMT)

I/O

USB

4x USB 3.0

8x USB 2.0

SATA

3x SATA 3.0 (up to 6Gb/s) (Core i7/i5)

2x SATA 3.0 (up to 6Gb/s) (Celeron)

RAID 0/1/5 (Core i7/i5 )

DIO

1x 8-bit DIO

Watchdog

Timer

Output and

Interval

System Reset, Programmable via Software from 1 to 255 Seconds

Security

TPM

Factory Option

Product specifications CPU-161-17 User Manual 0-2

14

/ 46

(continued from the previous page)

Specifications

Description

Power

Type

12V, 5VSB, VCC_RTC (ATX mode)

12V, VCC_RTC (AT mode)

Consumption

Typical: I7-6600U: 12V @ 0.86A (10.28Watt)

Max.: I7-6600U: 12V @ 1.372A (16.46Watt)

OS Support

• Board Support Package for CPU-161-17 Development Kits:

o Windows 10 IoT Enterprise

o CentOS 7

• Support for custom carriers (Prof. Services):

o Fedora/CentOS

o Debian

o Win 10 IoT Enterprise

o RedHat

®

Enterprise Linux

Environment

Temperature

• Operating:

o -40°C to +85°C (Temperature Screened)

o Factory option:

 0°C to +60°C

 -20°C to +70°C

o Storage: -40°C to 85°C

Humidity

• Operating:

o 5 to 90% RH

• Storage:

o 5 to 90% RH

Mechanical

Dimensions

COM Express

®

Compact

95mm (3.74") x 95mm (3.74")

Compliance

PICMG COM Express

®

R2.1, Type 6

CPU-161-17 User Manual 0-2 Product specifications

15 /

46

5.1 Features

5.1.1 Watchdog Timer

The Watchdog Timer function allows your application to regularly “clear” the system at the set time

interval. If the system hangs or fails to function, it will reset at the set time interval so that your system

will continue to operate.

5.1.2 DDR3L

DDR3L is a higher performance DDR3 SDRAM interface providing less voltage and higher speed

successor. DDR3L SDRAM modules support 1066/1333MHz for DDR modules. DDR3L de-livers

increased system bandwidth and improved performance to provide its higher bandwidth and its

increase in performance at a lower power.

5.1.3 Graphics

The integrated Intel

®

HD graphics engine delivers an excellent blend of graphics performance and

features to meet business needs. It provides excellent video and 3D graphics with out-standing

graphics responsiveness. These enhancements deliver the performance and compat-ibility needed for

today’s and tomorrow’s business applications. Supports HDMI, DVI and DP interfaces for up to 3

display outputs.

5.1.4 Serial ATA

Serial ATA is a storage interface that is compliant with SATA 1.0a specification. With speed of up to

3Gb/s (SATA 2.0), it improves hard drive performance faster than the standard parallel ATA whose

data transfer rate is 100MB/s.

5.1.5 Gigabit LAN

The Intel

®

I210 Gigabit LAN controller supports up to 1Gbps data transmission.

5.1.6 USB

The system board supports the new USB 3.0. It is capable of running at a maximum transmis-sion

speed of up to 5 Gbit/s (625 MB/s) and is faster than USB 2.0 (480 Mbit/s, or 60 MB/s) and USB 1.1

(12Mb/s). USB 3.0 reduces the time required for data transmission, reduces power consumption, and

is backward compatible with USB 2.0. It is a marked improvement in device transfer speeds

between your computer and a wide range of simultaneously accessible external Plug and Play

peripherals.

Concept CPU-161-17 User Manual 0-2

16

/ 46

6 CONCEPT

6.1 COM Express Module Standards

The figure below shows the dimensions of the different types of COM Express modules.

This product is a COM Express Compact module. The dimensions are 95mm x 95mm.

CPU-161-17 User Manual 0-2 Concept

17 /

46

6.2 Specification Comparison Table

The table below shows the COM Express standard specifications and the corresponding specifications

supported by the product.

Connector

Feature

COM Express Module Base

Specification Type 6

(No IDE or PCI, add DDI+ USB3)

Min / MAx

CPU-161-17

System I/O

A-B

PCI Express Lanes 0 - 5

1 / 6

6

A-B

LVDS Channel A

0 / 1

1

A-B

LVDS Channel B

0 / 1

1

A-B

eDP on LVDS CH A pins

0 / 1

1

A-B

VGA port

0 / 1

1

A-B

TV-Out

NA

A-B

DDI 0

NA

A-B

1

Serial Ports 1 – 2

0 / 2

2

A-B

CAN interface on SER1

0 / 1

0

A-B

STAT / SAS Ports

1 / 4

3 (With Intel

®

Celeron

®

: 2)

A-B

AC97 / HAD Digital Interface

0 / 1

1

A-B

USB 2.0 Ports

4 / 8

8

A-B

USB Client

0 / 1

0

A-B

USB 3.0 Ports

NA

A-B

LAN Port 0

1 / 1

1

A-B

Express Card Support

1 / 2

2

A-B

LPC Bus

1 / 1

1

A-B

SPI

1 / 2

1

System Management

A-B

2

SDIO (muxed on GPIO)

0 / 1

0

General Purpose I/O

8 / 8

8

A-B

SMBus

1 / 1

1

A-B

I2C

1 / 1

1

A-B

Watchdog Timer

0 / 1

1

A-B

Speaker Out

1 / 1

1

A-B

External BIOS ROM Support

0 / 2

1

A-B

Reset Functions

1 / 2

1

Power Management

A-B

Thermal Protection

0 / 1

1

A-B

Battery Low Alarm

0 / 1

1

A-B

Suspend/Wake Signals

0 / 3

1

A-B

Power Button Support

1 / 1

1

A-B

Power Good

1 / 1

1

A-B

VCC_5V_SBY Contacts

4 / 4

4

A-B

1

Sleep Input

0 / 1

1

A-B

1

Lid Input

0 / 1

1

A-B

1

Fan Control Signals

0 / 2

2

A-B

Trusted Platform Modules

0 / 1

1

Power

A-B

VCC_12V Contacts

12 / 12

12

1

Indicates 12V-tolerant features on former VCC_12V signals.

2

Cells in the connected columns spanning rows provide a rough approximation of features sharing connector pins

Concept CPU-161-17 User Manual 0-2

18

/ 46

Module Pin-out - Required and Optional Features C-D Connector. PICMG

®

COM.0 Revision 2.1

Connector

Feature

COM Express Module Base

Specification Type 6

(No IDE or PCI, add DDI+ USB3)

Min / MAx

CPU-161-17

System I/O

C-D

3

PCI Express Lanes 16 - 31

0 - 16

0

PCI Express Graphics (PEG)

0 / 1

0

Muxed SDVO Channels 1 - 2

NA

C-D

3

PCI Express Lanes 6 - 15

0 / 2

2

PCI Bus – 32 Bit

NA

PATA Port

NA

Lan Ports 1 - 2

NA

SSIs 1 - 3

0 / 3

1

USB 3.0 Ports

0 / 4

4

Power

C-D

VCC_12V Contacts

12 / 12

12

3

Indicates 12V-tolerant features on former VCC_12V signals.

CPU-161-17 User Manual 0-2 Hardware Installation

19 /

46

7 HARDWARE INSTALLATION

7.1 Board Layout

Hardware Installation CPU-161-17 User Manual 0-2

20

/ 46

7.2 Block Diagram

Page is loading ...

Eurotech CPU-161-17 Owner's manual

Eurotech CPU-161-17 Owner's manual

Related papers

Other documents