Special
Operating
Instructions
for
ADP 9000-110
73-51480-110
Revision A - October 2004
The ADP9000-110 differs from the standard
product in that 5 volts is available at pin 6. This
product was developed and tested to work with a
MC9060-KH0HBEEA4WW and a Sinbon cable
(p/n A9110525) attached to a LS3408-ER20005
scanner.
CAUTION: Do not plug in 3 volt peripherals.
Damage may occur.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI