Barclay Products RTDSN56-OF-WHGL User manual

RESIN FACTS AND CARE

Our resin soaker tubs and sinks are cast in a

joint-free mold using a polyester-aluminum

trihydrate blend material that hardens to a

solid surface. Resin’s non-porous surface

naturally resists stains, scratches and

discoloring. Sometimes referred to as

“man-made stone”, its extreme durability

helps to preserve its silky matte finish. This

versatile material also allows more freedom

of design since it can be cast into countless

shapes and forms.

Care and Maintenance

Clean water will remove most dirt from your resin tub. Use only mild

cleansers that are safe for painted surfaces when necessary. Do not use

abrasives, acids or ammonia. Wipe dry after each use to retain original

beauty.

Small Scratch Repair:

If a minor scratch should occur, rinse

any dirt from surface with clean water

and rub in small circular motions

using #800 grit sandpaper until scratch

disappears. Follow with #1200

sandpaper to smooth area. Dry with

a soft towel and finish by polishing

with automobile polish.

Barclay Products Limited ▪ 4000 Porett Drive ▪ Gurnee IL 60031 ▪P800-446-9700 ▪F847-244-1259 ▪ www.barclayproducts.com