2. Dyconn
  3. BTF06-BN
BTF06-BN

Dyconn BTF06-BN, BTF06-CHR, BTF43-BN, BTF43-CHR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dyconn BTF06-BN Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Single Leg Free Standing Tub Filler Faucet Manual
Notes before installation:
1. Please check that all components are present.
2. Before installation ensure that all feed lines are clear of debris and
on/off valve is present.
3. Ensure water pressure is between 20-125 PSI (Includes combination
of hot and cold feed lines).
4. Pictures in the manual are general in content and may not represent
exactly your purchased faucet. If you are having difficulties please
contact a professional plumber.
5. If you will be away from home for an extended period you should
shut off the main water supply.
5-3/4”
3-7/8”
1-7/8”
5-9/10”
6-5/8”
NPT 1/2”
Daily Maintenance
1. Use a soft cloth and vinegar to remove hard-water spots.
2. Check aerator (if present) regularly for calcium build up when water stream is
not optimal.
3. DO NOT use corrosive cleaning products as the use will break down nish and
will void the product warranty
4. Acceptable cleaners include vinegar or mild non-abrasive liquid detergents.
5. If the water pressure appears to be less than optimal, remove, inspect, clean or
replace aerator.
Conceal Box Installation Steps
Set the conceal box onto the subfloor
(Do not install onto tile) and measure
with the level provided. Check the
level and make sure it is perfectly
level with the ground. Then screw the
conceal box on the ground.
Note: N-box in-floor depth:D≤1.8” Adjust
level by gradiometer. Fix by M6 expansion
screw. After water pressure leakage testing,
if no leakage, cement and pave tiles.
with
Connect water lines to faucet body using
8mm hex key. Attach red line to red port
and blue line to blue port.
6.
1a.
1b. Connect one end of the hose with the
main body, and connect the other end
with the hand shower. If necessary, use
teflon tape.
/