Contec DIO-68M/96F Owner's manual

Contec
Brand
Contec
Model
DIO-68M/96F
Type
Owner's manual

Contec DIO-68M/96F is a shielded cable that converts a 68-pin 0.8mm-pitch connector into a 96-pin half-pitch connector. It's designed for use with CONTEC cards and features a 68 core shield cable with 34 pairs of AWG#30 conductors. The cable is durable and can withstand continuous use. It's also lightweight, weighing only 160g, making it easy to handle and transport.

Here are some potential use cases for the Contec DIO-68M/96F:

  • Connecting a CONTEC card to a computer or other device with a 96-pin half-pitch connector
  • Extending the reach of a CONTEC card
  • Replacing a damaged or lost cable

Contec DIO-68M/96F is a shielded cable that converts a 68-pin 0.8mm-pitch connector into a 96-pin half-pitch connector. It's designed for use with CONTEC cards and features a 68 core shield cable with 34 pairs of AWG#30 conductors. The cable is durable and can withstand continuous use. It's also lightweight, weighing only 160g, making it easy to handle and transport.

Here are some potential use cases for the Contec DIO-68M/96F:

  • Connecting a CONTEC card to a computer or other device with a 96-pin half-pitch connector
  • Extending the reach of a CONTEC card
  • Replacing a damaged or lost cable
1
DIO-68M/96F
Shielded Cable for CardBus
Digital I/O Card
DIO-68M/96F User’s Guide
CONTEC CO.,LTD.
DIO-68M/96F is a cable which converts 68-pin 0.8mm-pitch connector of the interface made of
CONTEC card into 96-pin half-pitch connector.
External Dimensions
500mm
68
35
1
34
39.7mm11.7mm
43.3mm
8mm
38.2mm 14.6mm
81mm
B1[96]
A48[1]
B48[49]
A1[48]
15mm
14.2mm
Specifications
Item Specification
68-pin
0.8mm-pitch
connector: HDRA-E68MA1 [HONDA]
or equivalent
Thumb screw: M2
Connector used
96-pin half-pitch, female connector
PCR-E96FA
[HONDA]
or equivalent
Cable
68 core shield cable (34pair). Conductor size : AWG#30
Conductor composition : 7pcs/0.1mm
UL20276
Weight
160g
Notes!
- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, cause a
failure or breakage.
- Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
DIO-68M/96F User’s Guide
Copyright 2004 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. November 2004 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-46-949 (LYEH441)
Chinese http://www.contec.com.cn/ [11042004]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Connection Diagram
68-pin
0.8mm-pitch
Connector
Pin No.
96-pin half-pitch
Connector
Pin No.
68-pin 0.8mm-pitch
Connector
Pin No.
96-pin half-pitch
Connector
Pin No.
32
31
30
29
1
3
68
26
55
19
67
25
62
24
61
23
56
20
46
18
45
17
36
16
35
15
34
14
33
13
28
10
27
9
22
8
21
7
12
6
11
5
2
4
66
65
64
63
60
59
58
57
54
53
52
51
50
49
48
47
44
43
42
41
40
39
38
37
Shell
Shield
Shell
B47
B45
B43
B41
B39
B37
B35
B33
B31
B29
B27
B25
B23
B21
B19
B17
B15
B13
B11
B09
B07
B05
B03
B01
Shell
Shield
Shell
A47
A45
A43
A41
A48
A46
A44
A42
A01
A02
A39
A40
A29
A30
A37
A38
A35
A36
A33
A34
A31
A32
A27
A28
A25
A26
A23
A24
A21
A22
A19
A20
A17
A18
A15
A16
A13
A14
A11
A12
A09
A10
A07
A08
A05
A06
A03
A04
B48
B46
B44
B42
B40
B38
B36
B34
B32
B30
B28
B26
B24
B22
B20
B18
B16
B14
B12
B10
B08
B06
B04
B02
  • Page 1 1
  • Page 2 2

Contec DIO-68M/96F Owner's manual

Contec
Brand
Contec
Model
DIO-68M/96F
Type
Owner's manual

Contec DIO-68M/96F is a shielded cable that converts a 68-pin 0.8mm-pitch connector into a 96-pin half-pitch connector. It's designed for use with CONTEC cards and features a 68 core shield cable with 34 pairs of AWG#30 conductors. The cable is durable and can withstand continuous use. It's also lightweight, weighing only 160g, making it easy to handle and transport.

Here are some potential use cases for the Contec DIO-68M/96F:

  • Connecting a CONTEC card to a computer or other device with a 96-pin half-pitch connector
  • Extending the reach of a CONTEC card
  • Replacing a damaged or lost cable
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents