Minka Lavery 3673-111 Operating instructions

Brand: Minka Lavery

Model: 3673-111

Type: Operating instructions

Minka Lavery 3673-111 is a versatile light fixture designed for indoor use. It features a sturdy metal construction with a stylish finish, adding a touch of elegance to any room. The fixture accommodates a single light bulb, allowing you to customize the brightness and ambiance. Installation is straightforward, with detailed instructions provided to guide you through the process. Whether you're updating your living room, bedroom, or hallway, this fixture is a great choice for adding both style and functionality to your home.

Fig.1

INSTALLATION INSTRUCTIONS

Item#3673-111(New.2018/01/08)

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig. 2

HANGING THE FIXTURE (Fig. 1)

1. Carefully remove the fixture from the carton and

check that all parts are included as shown in the

illustration.

2. Shut off power at the circuit breaker and remove old

fixture including the mounting hardware.

3. Removed the mounting bracket (C) from the back

plate (B) by unscrewing the mounting screw (A)

4. The mounting bracket (C) contains several pairs of

threaded holes, find the pair of holes that match the

holes spacing in your Junction box(E). Attach the

mounting bracket (C) to the Junction Box(E) using

the two mounting screws (G)( size: 8/32*25mm).

Tighten the screws (G) securely with screwdriver.

The side of the mounting plate marked “GND” must

face out.

CONNECTING THE WIRES (Fig. 2)

5. At this point, connect the electrical wires as shown in

(Fig.2), Make sure that all wire connections are

secured. If your outlet has a ground wire (green or

bare copper), connect the fixtures Ground Wire to it.

Otherwise, connect the fixture Ground Wire directly

to the mounting bracket

using the Green Screw

provided.

6. Secure the back plate(B) to the mounting bracket(C)

with the mounting screw (A)..

INSTALL LIGHT BULB (Fig. 1)

7. Install light bulb (F) (included) in accordance with the

fixture’s specifications.

(DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!!) (NE PAS DEPASSER LA

PUISSANCE NOMINALE MAXIMALE!)

Secure the Lamp shade (H) to the back plate(B) with

the ball screw(I)

FINISH THE INSTALLATION (Fig. 1)

9. Your installation is complete now. Return power to

the junction box and test the fixture. Note:

Illustration (Fig.1

) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased

3673-111

- Set #A-022-173300

- Mounting bracket

-Ground Screw

-Mounting Screw*2

MIN 75

℃

SUPPLY CONDUCTORS

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

Minka Lavery 3673-111 Operating instructions

Minka Lavery 3673-111 Operating instructions

Minka Lavery 3673-111 Operating instructions

Related papers

Other documents