Intermec Apriva BT200-T User manual

Brand: Intermec

Model: Apriva BT200-T

Type: User manual

This manual is also suitable for

Apriva BT200-T

Smart Card Reader

CN4G, CN4eG, CK61G

User’s Guide

ii Apriva BT200-T Smart Card Reader User’s Guide

Intermec Technologies Corporation

Worldwide Headquarters

6001 36th Ave.W.

Everett, WA 98203

U.S.A.

www.intermec.com

The information contained herein is provided solely for the purpose of allowing customers to

operate and service Intermec-manufactured equipment and is not to be released, reproduced, or

used for any other purpose without written permission of Intermec Technologies Corporation.

Information and specifications contained in this document are subject to change without prior

notice and do not represent a commitment on the part of Intermec Technologies Corporation.

The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,

dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),

Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,

Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,

and Vista Powered are either trademarks or registered trademarks of Intermec Technologies

Corporation.

There are U.S. and foreign patents as well as U.S. and foreign patents pending.

Apriva BT200-T Smart Card Reader User’s Guide iii

Document Change Record

This page records changes to this document. The document was

originally released as Revision 001.

Version

Number

Date Description of Change

004 9/2010 Updated procedures on how to connect the

Apriva BT200-T to the CN4G and CN4eG.

003 9/2009 Updated procedures on how to install Odyssey

Access Client and Fortress Security Client onto

the CK61G.

002 7/2009 Updated procedures on how to connect the

Apriva BT200-T to the CK61G.

iv Apriva BT200-T Smart Card Reader User’s Guide

Contents

Apriva BT200-T Smart Card Reader User’s Guide v

Contents

Learning About the Apriva BT200-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Understanding the Power Button and LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Checking and Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing and Pairing the SCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Loading the SCR Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Pairing the SCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Installing Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Installing the AprivaGuard Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Contents

vi Apriva BT200-T Smart Card Reader User’s Guide

Apriva BT200-T Smart Card Reader User’s Guide 7

Learning About the Apriva BT200-T

The Apriva BT200-T Bluetooth Smart Card Reader (SCR) works with

the CN4G, CN4eG, or CK61G Mobile Computer to enable data

sensitive enterprises to have a high level of security for wireless

communication. The SCR provides users with strong identification

and authentication using hard token certificate and private key

policies.

Understanding the Power Button and LEDs

The SCR has a Power button and two status LEDs to tell you the

status of the smart card reader.

Apriva BT200-T Power Button and Status LEDs

Understanding the Status LEDs

Action LED Status Description

You power on the

SCR.

Solid green for a

few seconds

The SCR has a good charge.

Solid red You need to charge the battery.

No LED The battery is completely discharged.

You first insert a

common access

card (initial four

seconds).

Solid green Battery is over 75% charged and is ready

for operation.

Flashing green Battery has between 25% and 75%

charged capacity.

Solid red Battery has less that 25% charge. You

need to charge the battery.

Power button

Status LEDs

8 Apriva BT200-T Smart Card Reader User’s Guide

If the LED is not blinking after you press the Power button, you need

to charge the SCR for 30 or more minutes. After 30 minutes, you need

to check the status of the indicators by inserting a smart card.

Checking and Charging the Battery

The SCR takes approximately 3 hours to charge its internal battery.

You can use the wall charger or a USB cable to charge the SCR.

To check the status of the battery

• Press the Power button and observe the status LEDs. For more

information on the status LEDs, see “Understanding the Power

Button and LEDs” on page 7.

To charge the battery using the wall charger

1 Attach the SCR to the wall charger.

2 Insert the wall charger into an electrical outlet.

3 The green LED turns on indicating that the SCR is charged.

Common access

card has been

inserted for more

than four

seconds.

Flashing green

or red every one

second.

Connection between the mobile

computer and the SCR has been

established, and the SCR is ready for

operation.

You connect the

USB cable.

Solid green SCR is being charged, and cannot be

used.

Note: You can use the SCR when you

are charging with the wall charger, but

you cannot use the SCR when a USB

connection is the main power source.

You remove the

Smart card or

charge cable.

Green and red

flash once

When you press the Power button, the

LED flashes to provide a visual clue

that the SCR has been powered off.

Understanding the Status LEDs (continued)

Action LED Status Description

Apriva BT200-T Smart Card Reader User’s Guide 9

To charge the battery using a USB cable

1 Connect the USB adapter to the USB cable, then connect the USB

adapter to the SCR to the port labeled PC.

2 Connect the other end of the USB cable to your notebook or

desktop PC. The green LED turns on indicating that the SCR is

charged.

While charging using the USB cable, all smart card operations are

disabled.

Installing and Pairing the SCR

There are five important steps to follow before you can use the

SCR.

To install and pair the SCR

1 For the CK61G, upgrade the operating system (OS) and

SmartSystems Platform Bundle (SSPB). For more information, see

the CK61 Mobile Computer User’s Manual.

2 Load the SCR software onto the mobile computer.

3 Pair the SCR to the mobile computer.

4 Install security.

5 Install the AprivaGuard software.

Use the following sections to help you install and pair the SCR to your

mobile computer.

Note: If the battery is discharged to the point where you cannot turn

on the SCR, you need to charge, the SCR for 20 to 30 minutes. Once

the SCR has been charged for that amount of time, turn the SCR off

and on again to finish charging.

10 Apriva BT200-T Smart Card Reader User’s Guide

Loading the SCR Software

Use this section to learn how to load the SCR software onto your

mobile computer.

To load the SCR software

1 Tap the iConnect icon. The iConnect menu appears.

2 If you are installing the SCR software onto the CK61G:

a Select Enable and make sure that Assured Radio

Deactivation is not checked. The mobile computer restarts

with Assured Radio Deactivation turned off.

b Tap OK on the Assured Radio Deactivation screen.

c Tap Start > Settings > the Connections tab > Bluetooth. The

Bluetooth Settings screen appears.

d Select the Turn on Bluetooth check box to enable Bluetooth.

e Tap OK to exit the Bluetooth Settings screen.

Apriva BT200-T Smart Card Reader User’s Guide 11

If you are installing the SCR software onto the CN4G or CN4eG,

continue to the next step.

3 Establish an ActiveSync connection between your mobile

computer and your desktop PC by placing the mobile computer

into communications dock. For more information, see the mobile

computer user’s guide.

4 Once a connection has been established, the Microsoft ActiveSync

screen appears on your PC. Click the Explore button and browse

to the \My Documents folder.

5 Download the Apriva software from www.intermec.com/ait and

extract all of the files into the \My Documents folder.

6 Remove the mobile computer from the communications dock and

tap Programs > File Explorer on your mobile computer. The File

Explorer screen appears.

12 Apriva BT200-T Smart Card Reader User’s Guide

7 Install the SCR software and pair the SCR with your mobile

computer. For help, see the next section.

Pairing the SCR

Use this section to learn how to pair the SCR with your mobile

computer. For security purposes, you must pair the SCR using a USB

cable. After the initial pairing, you do not need to pair the SCR with a

USB cable again.

To pair the SCR

1 Browse to the \My Documents folder and tap

AprivaSmartCardDriver.SWM5PPCxxxx.cab where xxxx is the

version number. The .cab file is installed onto your mobile

computer and cold boots your device.

2 Place the mobile computer into the communications dock.

Apriva BT200-T Smart Card Reader User’s Guide 13

3 Connect a USB cable to your communications dock and to the

SCR using the USB adapter provided. Note that you have to

connect it to the port labeled PDA.

The SCR Connected to the CK61G Communications Dock.

4 Turn the smart card reader on by pressing the Power button. The

green LED on the card reader blinks once every second to indicate

that there is a USB connection present.

Note: Use the cable that you connected to your PC. The cable that

comes with the SCR is a charge only cable.

USB adapter

USB cable

Power button

Status LEDs

14 Apriva BT200-T Smart Card Reader User’s Guide

5 On the mobile computer, tap Start > Settings > System > Apriva

Reader. The Apriva Reader screen appears.

6 Pair the SCR and the mobile computer by selecting the USB

option and tapping the Pair button.

7 Tap Test Connection to verify that the mobile computer is

communicating with the smart card reader.

8 Tap the Version tab. The Version screen appears.

9 Tap the Update button.

10 Select AprivaReaderxxxx.bin where xxxx is the version number.

The smart card reader begins the firmware update process.

11 Tap the Details tab and the Verify Signatures button to verify the

digital signatures of the firmware.

12 Tap the Connection tab, and select the Bluetooth option.

13 Remove the USB cable from the SCR, and turn the power to the

SCR back on by pressing the Power button.

Note: If the green LED blinks once every four seconds, the SCR is

powered on, but there is no USB connection. Repeat Step 3 to pair

the SCR. For more information about the LED status see,

“Understanding the Power Button and LEDs” on page 7.

Apriva BT200-T Smart Card Reader User’s Guide 15

14 Tap Test Connection to verify that the SCR is communicating

with the mobile computer.

15 Tap OK to close the Apriva Reader application.

16 Browse to the \My Documents folder and tap

Semtek Innovative Solutions CAC Reader.cab. The .cab file is

installed onto your mobile computer.

17 Go to File Explorer, browse to the \My Documents folder, and

tap AprivaCSPware.SWM5PPC.cab. The .cab file is installed and

your mobile computer reboots.

18 (Optional) If you need access to the Department of Defense web

site, go to File Explorer, browse to the \My Documents folder,

and tap InstallRoot_WinMobile6_313.cab. The .cab file is

installed onto your mobile computer.

19 If you are installing the SCR software onto the CK61G, you need

to install the following files in the \My Documents folder:

• Intermec Funk_AprivaConfig.cab

• SR08100900_RTC_CK3WM61_ALL.cab

• SR10052500_FUNK_WM61_ALL.cab

20 Install security. For help, see the next section.

Note: Pairing the smart card reader only needs to be performed

once. To select a connection, tap the USB or Bluetooth option

when the SCR and the mobile computer are connected to the

communications dock.

16 Apriva BT200-T Smart Card Reader User’s Guide

Installing Security

You can choose to install two types of security onto the mobile

computer:

• Odyssey Access Client

• Fortress Secure Client

The Odyssey Access Client and Fortress Secure Client both provide a

high level of security over your WLAN. These clients protects the

authentication and connection of the WLAN users and devices,

ensuring that only authorized users connect, that login credentials are

not compromised, and that both network and data privacy will be

maintained over the wireless link.

For help on selecting a client, contact your local Intermec

representative.

To install Fortress Secure Client

1 Go to File Explorer, browse to the \My Documents folder, and tap

WZeroConfigEnable.cab. Microsoft Zero Config is installed.

2 Make sure that the mobile computer can successfully associate

with an access point by tapping the iConnect icon > Status >

Wireless > the Advanced button. The ISpyWiFi utility appears

and shows whether you can associate your mobile computer with

an access point.

3 Use the iConnect application to configure the IP address, network

mask, and SSID.

4 Download the Fortress Secure Client Installation Guide from the

Intermec AIT web site, and follow the directions to install and

configure the Fortress Secure Client.

5 Install the AprivaGuard software. For help, see “Installing the

AprivaGuard Software” on page 17.

The CN4G and CN4eG comes with Odyssey Access Client already

loaded. To use the client on your CN4G and CN4eG, you must

purchase a user license, and activate it. For help on activating the

client, see the CN4G and CN4eG Odyssey Access Client Installation

Instructions.

Apriva BT200-T Smart Card Reader User’s Guide 17

To install Odyssey Access Client for the CK61

1 Go to File Explorer and browse to the \My Documents folder,

and tap Intermec Funk_Apriva.cab file. The .cab file is installed

on your mobile computer.

2 Tap WZeroConfigEnable.cab. Microsoft Zero Config is installed

on your mobile computer.

3 Purchase and download the Odyssey Access Client. For more

information, go to www.juniper.net.

4 Download the Odyssey Access Client Installation Guide from the

Intermec AIT web site, and follow the directions to install and

configure the Odyssey Access Client.

5 Install the AprivaGuard software. For help, see “Installing the

AprivaGuard Software” on page 17.

Installing the AprivaGuard Software

Install the AprivaGuard software license onto your mobile computer

to enable PKI authentication and validation for the mobile computer

and a given application.

To install the AprivaGuard software

• Browse to the \My Documents folder, and tap

AprivaGuard.WM5PPC.cab file. AprivaGuard installs onto your

mobile computer.

Note: Set the correct date and time, and install any other software

applications you have before installing AprivaGuard. Once

AprivaGuard is installed, you cannot make any changes to your

mobile computers.

18 Apriva BT200-T Smart Card Reader User’s Guide

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel 425.348.2600

fax 425.355.9551

www.intermec.com

Apriva BT200-T Smart Card Reader User’s Guide

*931-059-004*

P/N 931-059-004

Intermec Apriva BT200-T User manual

Brand: Intermec

Model: Apriva BT200-T

Type: User manual

This manual is also suitable for

Download PDF

report

Intermec Apriva BT200-T User manual

This manual is also suitable for

Intermec Apriva BT200-T User manual

Related papers

Other documents