BLADEZ POWERMILL BF-6422 Owner's manual

BLADEZ
Brand
BLADEZ
Model
POWERMILL BF-6422
Category
Treadmills
Type
Owner's manual

BLADEZ POWERMILL BF-6422 is a versatile treadmill designed to provide an effective and enjoyable workout experience for users of all fitness levels. With its 5 preset programs and 5 levels of intensity, it offers a range of workout options for personalized fitness goals. The treadmill also features a user-friendly console that displays workout data such as time, speed, distance, calories burned, and heart rate, allowing you to track your progress and stay motivated during your workouts.

BLADEZ POWERMILL BF-6422 is a versatile treadmill designed to provide an effective and enjoyable workout experience for users of all fitness levels. With its 5 preset programs and 5 levels of intensity, it offers a range of workout options for personalized fitness goals. The treadmill also features a user-friendly console that displays workout data such as time, speed, distance, calories burned, and heart rate, allowing you to track your progress and stay motivated during your workouts.

Treadmill Owner’s Manual
BF 6422
1
INTRODUCTION:
C
ongratulations for selecting POWERMILL BF-6422 as your primary source of
fitness. BLADEZ treadmills offer many exercise programs that benefit users of all
levels and ages. The treadmill is designed to make your workouts more effective and
enjoyable.
Please read this manual carefully before using your BF-6422 POWERMILL. This
will allow you to get a full understanding of all the features BLADEZ’ treadmills
provide. If you have any questions or concerns, please contact BLADEZ Corporation
or any authorized BLADEZ FITNESS distributors in your area.
BLADEZ Corporation
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949-206-0330
Fax: 949-206-0350
Email: www.customerservice@ebladez.com
BEFORE YOU BEGIN
It is very important to get yourself familiar with the frequently used components of
your POWERMILL.
Revision Date: 01/15/2004
2
TABLE OF CONTENTS
SECTION PAGE
1. IMPORTANT SAFETY INSTRUCTIONS ............................................................ 3
2. ASSEMBLY INSTRUCTIONS.............................................................................. 5
3. GETTING STARTED.............................................................................................10
4. PROGRAMS DETAILS .........................................................................................14
5. PREVENTIVE MAINTENANCE..........................................................................16
6. EXPLODED VIEWS..............................................................................................17
7. PARTS LIST ...........................................................................................................18
8. TROUBLESHOOTING..........................................................................................19
9. WARRANTY..........................................................................................................21
3
SECTION 1
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the treadmill.
Notice: Consult your family physician or health care professional to develop a well
planned exercise program to fit your health needs. If you encounter any pain or
breathing discomfort while working out, STOP!, and consult a physician before
continuing.
WA R N I N G !
1. It is wise to always unplug this appliance from the electrical outlet
immediately after use.
2. It is mandatory that you unplug the treadmill prior to cleaning to reduce the
risk of electric shock, serious burns, and the risk of injuries.
3. The treadmill should never be left unattended when in operation. Unplug the
treadmill from the outlet when not in use or when servicing the treadmill.
4. Close supervision is necessary when this appliance is used by, on, or near
children, invalids, or disabled persons.
5. Use this appliance only for its intended use as described in this manual.
Do not use any attachment not recommended by the manufacturer.
6. Never operate this appliance if it has a damaged cord or plug, or if it is not
working properly. Call your service center for any service concerns before
taking your treadmill in for repair.
7. Keep the cord away from heated surfaces.
8. Never drop or insert any object into any opening.
9. Do not use outdoors.
10. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
11. To disconnect, turn all controls to the off position, then remove plug from
outlet.
12. Connect this appliance to a properly grounded outlet only.
13. This appliance is intended for household use only.
SAVE THESE INSTRUCTIONS
4
IMPORTANT SAFETY INSTRUCTIONS CONTINUED
GROUNDING INSTRUCTIONS
This product must be grounded. If it malfunctions or breaks down, grounding
provides a path of least resistance for electric currents, to reduce the risk of electric
shock. This product is equipped with a cord which has an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
WA R N I N G !
– An improper connection of the equipment grounding conductor
can result in a risk of an electrical shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided to you. If it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 110-120-volt circuit and has a grounding plug
that looks like the plug illustrated in the figure. Make sure that the product is
connected to an outlet having the same configuration as the plug. No adapter or
extension cord should be used with this product.
GROUNDING METHODS
GROUNDED
OUTLET
GROUNDING
PIN
5
SECTION 2
ASSEMBLY INSTRUCTIONS
ASSEMBLY PART LIST
ITEM NO. DESCRIPTION QUANTITY
a Bolt
,
M5 x P0.8 x 10 4
b
Bolt
,
M5 x P0.8 x 15 2
c Bolt
,
M8 x P1.25 x 15 8
d
Bolt
,
M8 x P1.25 x 60 8
e Screw Ø5 x 25 2
f Allen wrench 5m
m
1
g
Allen wrench 6m
m
1
h Power Cor
d
1
i Safety key 1
6
ASSEMBLY INSTRUCTIONS CONTINUED
Illstrations of treadmill assembly.
A minimum of two people are
required to assemble this
treadmill. Also, read and
understand all instructions
thoroughly before assembling
the treadmill.
Failure to do so could result in
injury.
1. Use 2 bolts (b) to secure
the bottle holder (M) to the
right side upright (D).
NOTE: Bottle hold can be
placed onto either the left
(C) or right (D) side
uprights.
You will find two holes on
one side and that is the
inner side of the left and
right uprights.
2. Tie the attached black
guide wire to the wire
connector and feed the
wire slowly through the
bottom right upright (D)
opening and pull the
connector from the top. Be
sure not to pull on the wire
too hard if it does not feed
easily.
Then secure the left (C)
and right uprights (D) onto
the base frame with 8
bolts (c) using 5mm allen
wrench as shown.
Note: Leave all handlebar
bolts loose until console
display has been installed,
then tighten all of the
handlebar bolts.
7
ASSEMBLY INSTRUCTIONS CONTINUED
3. Press the left and right covers
(E and F respectively) onto the
main frame and secure them
with 4 bolts (a) as shown.
4. Feed the handrail wires
through the console mounting
pipe (G and H) openings and
pull them out from the top.
Insert handrails (I and J) onto
console mounting pipes (G
and H); (J) has the speed
control switch and
the (I) has the elevation
control switch. Make sure that
holes are lined up with each
other.
8
ASSEMBLY INSTRUCTIONS CONTINUED
5. Pull the wires from the right
upright and feed through a
hole underneath the console
mounting pipe as shown in
zoomed view. Pull the wire
connector from the top of the
console mounting pipe and
rest the handrail on top of the
uprights. Secure them with 4
bolts (d).
6. Connect wire connectors
coming out from the console
(A) and the console mounting
pipes on both ends. Place the
console (A) on top of the
console mounting pipes and
secure it with 4 bolts (d) using
5mm Allen wrench.
9
ASSEMBLY INSTRUCTIONS CONTINUED
7. Tighten all handrail bolts.
Press to snap the left and right
handrail covers (K and L) in
place and secure them with 2
screws (e).
10
SECTION 3
GETTING STARTED
FOLDING:
To fold your treadmill into the upright position, first be sure to set the elevation to the 0
% elevation. Treadmill will not lock into the upright position if the treadmill is not at
0 % elevation.
Using both hands, lift the treadmill by the end caps and push it up until the retaining shaft
locks the treadmill into place.
UNFOLDING:
To unfold the treadmill from the upright position simply depress the unfolding pedal with
your right foot and guide the deck down with both hands. Make sure that you do not let
go until the deck is firmly on the floor.
End Cap
Casters
Retaining Shaft
Unfolding Pedal
MOVING THE TREADMILL
The treadmill will need to be locked in the upright position as illustrated above.
Grab the end caps with two hands and slowly pull the deck down towards
your body until the casters are able to roll freely. Keep the treadmill at that angle
until you are done with your move.
11
GETTING STARTED CONTINUED
SAFETY KEY & CLIP
Your Bladez treadmill is equipped with a safety key that will disable the treadmill if it is
not in place. You should attach the clip end to your clothing. The magnet end goes into
the recess of the console. If at any time you need to stop the treadmill quickly simply
pull the safety key off the console. This will cut all power to the treadmill and it will
come to a complete stop. To resume your workout, place the safety key back in place.
You will then need to program your workout again.
BEFORE STARTING
Straddle the running belt and stand on the plastic side rails. Insert the safety key and
attach the rope to your clothing. Do not stand on the walking belt while starting or
stopping the treadmill.
QUICK START
1. Turn on POWER
2. Press START. The running belt will start to move at 0.5 MPH.
3. Adjust Speed with the keys.
4. Adjust Incline with the keys.
TO STOP
1. Step off running belt onto the plastic side rails
2. Press STOP. The running belt will stop
Note: For an immediate stop, pull out the safety key from the safety key
recess and the treadmill will stop abruptly.
MANUAL PROGRAM SET UP
1. Turn on POWER
2. Press MODE key ~ Manual light will be flashing
3. Press ENTER key ~ Time will be flashing.
4. Adjust time with the keys.
5. Press START
6. Adjust Speed with the keys.
7. Adjust Incline with the keys.
12
GETTING STARTED CONTINUED
PROGRAM SET-UP
1. Turn on POWER
2. Press MODE key ~ Manual light will be flashing.
3. Adjust the programs from P1-P5 with the keys.
4. Press ENTER ~ Level light will be on.
5. Adjust the levels from L1-L5 with the keys.
6. Press ENTER ~ Time light will be flashing
7. Adjust the time with the keys.
8. Press START
USING HEART RATE
GRIP PULSE – To periodically check your heart rate, grab the sensors at the
base of the console. The PULSE LED will flash and after about 9 seconds
your pulse will be shown in the pulse window.
KEY FUNTIONS
START – This key is used to begin any treadmill program or quick start.
MODE – This key is used to enter into the program mode. It is also used to
change the values on the display readout such as changing from
ELEVATION to PULSE.
STOP – This key is used to stop the treadmill at any time. Press the STOP
button and hold for 3 seconds and the treadmill will reset itself.
This key is used to change values during programming
It is also used to adjust the speed on the treadmill.
This key is used to adjust the elevation on the treadmill.
INSTANT SPEED KEYS – You can change the speed of the treadmill by
pressing one of the Instant Speed Key buttons. Each key represents the
assigned value in Miles per hour (MPH).
13
GETTING STARTED CONTINUED
HANDRAIL CONTROLS –
The right handrail controls the speed of the treadmill and can be adjusted at
any time during your workout.
The left handrail controls the elevation of the treadmill and can be adjusted
at any time during your workout.
CONSOLE FEEDBACK
TIME – This will read the number of minutes left in the program that you
have selected. In Quick start it will read the number of minutes
that you have been exercising.
CALORIES – This reading is the amount of body heat in calories burned
during your workout. - This is an estimated value.
ELEVATION/PULSE – Elevation will read as a percent of incline (0-12%)
Pulse will read in beats per minute. (BPM)
SPEED – This is how fast you are moving in terms of miles per hour. (MPH)
DISTANCE – Total distance traveled during your workout. This value is
displayed in miles.
14
SECTION 4
PROGRAM DETAILS
The following is a dot-matrix level scale display showing INCLINE and SPEED windows.
Each pre-set program P1-P6 has 3 levels of workout choices as shown in the following
profiles.
P1-9 HOLE P2-CARDIO
INCLINE SPEED INCLINE SPEED
15
PROGRAM DETAILS CONTINUED
P3 – RUNNING P4 – FAT BURN
INCLINE SPEED INCLINE SPEED
P4 – INTERVALS P6 – HILL INTERVALS
INCLINE SPEED INCLINE SPEED
16
SECTION 5
PREVENTIVE MAINTENANCE
If the running belt has shifted to left or
right off the center or simply skid when
running, please refer to the following
1. Turn the power off.
2. Use a 6mm wrench to tighten the
rear roller bolt on the side of the
treadmill toward which the belt is
moving as shown.
3. Tighten about 1/4 of turn
(clockwise).
Note: If the belt does not move
back to the center of the treadmill,
make another adjustment to the
same bolt until the running belt
moves closer to the center.
Once the running belt has been
adjusted closer to the center, the
treadmill can be powered on again.
It is recommended that the deck be
lubricated every 6~12 months according to
the frequency of usage.
Use 6mm Allen wrench to loosen the bolts
in the end caps. Remove excessive
accumulations of dust, dirt, and other
substances from running deck. Use a clean
soft cloth.
Warning! Do not use cleaner under the
running belt.
Pull up running belt, dispense lubricant on
deck, and spread evenly.
After lubricating deck, center the belt,and
tighten the end caps. Check belt condition
and adjust if necessary referring to the
steps above.
Rear Roller Bolt
6 mm wrench
0.5~4.0 Mile lubricate every 1 year
4.0~7.0 Mile lubricate every 6 months
7.0~10.0 Mile lubricate every 3 months
17
SECTION 6
EXPLODED VIEW
BF6527 HRP
BF - 6422
18
SECTION 7
PART LIST – BF-6422
Item Qty Item Qty
1
Computer console P-1107&P-1108
156
Frame
1
2
Bolt K-299
857
Power socket
1
3
Computer pipe (L)
158
Power switch
1
3.1
Computer pipe (R)
159
Circuit breaker
1
4
Handrail upper cover (L) P-1102L
160
Sensor (round)
1
4.1
Handrail upper cover (R) P-1102R
161
Bolt
M5xP0.8x12
4
5
Handrail cover plate NO.2405
262
Wire button
UC-1
2
6
Bolt
ψ
4
x10
263
Bolt
M4xP0.7x15
1
7
Bottom cover (L) P-1099L
164
Bolt
M8xP1.25x35
6
7-1
Bottom cover (R) P-1099R
165
Belly pan P-1325
1
8
Handrail
266
Bolt
M8xP1.25x50(25mm)
2
9
Cap
ψ
1-1/2"
x1.5t
267
Cushion P-1301
6
10
PVC sponge FM-005
268
Bolt M4xP0.7x10
8
11
Upright (L)
169
Plastic P-1034
8
11-1
Upright (R)
170
Bolt ψ4x12
25
12
Support base
171
Bolt
M8xP1.25x55
3
13
Moving wheels P-1312
472
Washer ψ8xψ12x1.5t
3
14
Spring washer M8
673
Bolt
M8xP1.25x45
1
15
Spacer
T*1316
474
Bolt
M8xP1.25
2
16
Plastic washer
P-1057
675
Rear adjust box (L)
P-1054L
1
17
Support axil T*1318
276
Rear adjust box (R)
P-1054R
1
18
Lifter
177
Bolt
M4xP0.7x20
2
19
Wheels
P-320
278
Upper cover
P-1313
1
20
Bolt M8xP1.25x15
879
Front roller
1
21
Bolt M10xP1.5x12
880
Walking belt
1
22
Double D washer
NO.2737
881
Plastic foot rail
P-1053A
2
23
Bolt M10xP1.5x35
482
Rear roller
1
24
Bolt M8xP1.25x40
283
Bolt
M8xP1.25x40
2
25
Bolt
ψ5x25
284
Sponge
20x100x1.5t
6
26
Plate (L)
NO.2392-L
185
Walking board
1
27
Plate (R)
NO.2392-R
186
Power cord
1
28
Base
187
Control wire (bottom)
1
29
Bolt
K-288
488
Wire button
UC-0
2
30
Nut
M10xP1.5
589
Side cover plastic P-1319
2
31
Post
T*1026
190
Extension (green)
14AWGx120mmx1T1R
1
32
Bolt
M8xP1.25x35
191
Extension (white)
14AWGx90mmx2T
2
33
Deck NO.2393
192
Extension (black)
14AWGx90mmx2T
1
34
Nut M8xP1.25
15 93
Extension (white)
14AWGx170mmx2T
1
35
Spring S-077
194
Extension (black) 14AWGx170mmx2T
1
36
Spacer P-1058
195
Allen wrench 6mm（80mmx80mm）
1
37
Safety key/ Clip
196
Allen wrench 5mm（80mmx80mm）
1
38
Cylinder CY-004
297
Wheels
P-1145
2
39
Bolt M5xP0.8x15
298
Bolt M4xP0.7x16
4
40
Bolt M5xP0.8x10
10 99
Bolt M8xP1.25x25
2
41
Cover (L) P-1103L
1 100
Foot pad P-1151
4
42
Cover (R) P-1103R
1 101
Bolt
ψ 4x20
8
43
Motor bottom cover P-1314
1 102
Powder metal
T*1312
8
44
Bolt
M6xP1.0x10
13 103
Sensor plate P-1152
1
45
Motor set
1 104
Powder metal
T*1312A
2
46
Belt
1 105
Steel M5xP0.8x8
3
47
Bolt
M8xP1.25x20
4 106
Handrail control sticker (speed)
1
48
Washer
ψ 8xψ19x3.0t
4 107
Handrail control sticker (angles)
1
49
Bolt
M8xP1.25x15
2 108
Handrail
2
50
Motor plate NO.2741
1 109
Handrail switch + wire
2
51
Incline motor
1 110
Bolt
ψ3x8
2
52
Bolt M10xP1.5x40
1 111
Bolt
ψ3x20
4
53
ㄇ shape steel pin
T*1001
2 112
Rivet
4
54
R pin
ψ
10
xψ2.0
2 113
Water bottle
1
55
Controller
1 114
Bottle holder
1
Description Description
19
SECTION 8
TROUBLESHOOTING
ERROR MESSAGE
PROBABLE CAUSES
SOLUTION
E1
- Loss of Feedback Speed Sensor disconnected Check Speed
Sensor Connection
- Running Deck Running Deck not
lubricated
Speed Sensor misaligned
Check R-Deck oil
Check Sensor position
Speed Sensor Faulty Replace S-Sensor
Loose Display Cable Check Display
Cable connection
Faulty MCB
(D2 LED on)
Replace MCB
Drive Motor disconnected
Check D-Motor connection
Drive Motor Faulty Replace D-Motor
E4
- Body Fat Data Incomplete Heart Rate not detected Hold Heart Rate Grip
Properly
- Loss of Data Faulty Receiver in Display Replace Heart Rate
Receiver
Faulty Control Board in
Display
Replace Heart Rate Control
Board
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

BLADEZ POWERMILL BF-6422 Owner's manual

BLADEZ
Brand
BLADEZ
Model
POWERMILL BF-6422
Category
Treadmills
Type
Owner's manual

BLADEZ POWERMILL BF-6422 is a versatile treadmill designed to provide an effective and enjoyable workout experience for users of all fitness levels. With its 5 preset programs and 5 levels of intensity, it offers a range of workout options for personalized fitness goals. The treadmill also features a user-friendly console that displays workout data such as time, speed, distance, calories burned, and heart rate, allowing you to track your progress and stay motivated during your workouts.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents