Swann PRO-770 Installation guide

PRO-770
Swann
Brand
Swann
Model
PRO-770
Category
Video surveillance kits
Type
Installation guide

Swann PRO-770 is a high-resolution security camera with a 4-9mm vari-focal zoom lens that allows you to customize the subject and area of surveillance. It features night vision with a range of up to 115ft/35m, making it suitable for low-light conditions. The camera is weather-resistant and can be mounted on a ceiling or wall. It is compatible with standalone Swann DVR systems and recording devices with BNC or RCA connections. The PRO-770 is easy to install and comes with a BNC extension cable, power adapter, and BNC to RCA adapter.

Swann PRO-770 is a high-resolution security camera with a 4-9mm vari-focal zoom lens that allows you to customize the subject and area of surveillance. It features night vision with a range of up to 115ft/35m, making it suitable for low-light conditions. The camera is weather-resistant and can be mounted on a ceiling or wall. It is compatible with standalone Swann DVR systems and recording devices with BNC or RCA connections. The PRO-770 is easy to install and comes with a BNC extension cable, power adapter, and BNC to RCA adapter.

English
If this device does not work when you first plug it
in, do not take it back to the store.
Vari-Focal
Security Camera
Night Vision 115ft/35m
Contact the Swann Helpdesk using our fast e-mail service
[email protected] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Installation Guide
Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
product The
end user is responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
Warranty Information
www.swannsecurity.com
Swann Technical Support
All Countries E-mail: [email protected]
Telephone Helpdesk
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
UNITED STATES toll free
1-800-627-2799
1-877-274-3695
(Su, 2pm-10pm US PT)
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
USA Exchange & Repairs
562-777-2551
(M-F, 9am-5pm US PT)
AUSTRALIA toll free
1300 138 324
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
New Zealand toll free
0800 479 266
International
+61 3 8412 4610
Swann Communications USA Inc.
12636 Clark Street
Santa Fe Springs CA 90670
USA
Swann Communications PTY. LTD.
Building 4, 650 Church Street,
Richmond, Victoria 3121
Australia
WARNING: IMPORTANT NOTICE ABOUT CORRECT USE OF POWER ADAPTER
The correct orientation
for the enclosed power
adapter is in a vertical
or floor mount position
L’orientation correcte pour
L’adapteur secteur fourni
est dans une position
verticale ou plancher-
monte.
La orientacion correcta para
el adaptador electrico incluido
es en posicion vertical o instalado
en el suelo.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
PRO-770
Thank you for purchasing the PRO-770 Security Camera by Swann. The
advanced design incorporates a high resolution CCD camera built into a rugged
weather-resistant casing. The PRO-770 is a versatile ceiling or wall-mounted
camera with the ability to zoom and focus with the built-in 4-9mm zoom lens. The
PRO-770 is compatible with standalone Swann DVR systems and recording
devices with BNC or RCA connections.
1 - PRO-770 Vandal-Resistant Dome Camera with Stand
2 - BNC Extension Cable
3 - Power Adapter
4 - BNC to RCA Adapter
5 - Manual & Accessories
If any of the contents are missing or damaged contact Swann for assistance
Technical Specifications
Introduction
Package Contents
NOTE: All jurisdictions have specific laws and regulations relating to the use of
cameras. Before using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and regulations that prohibit or
limit the use of cameras and to comply with the applicable laws and regulations.
The legality of watching people other than yourself changes from country to
country and even state to state. Contact your local government's privacy
information body or your local Police for more information on what if any
restrictions you may face.
PRO-770
Image Sensor: 1/3” Sony CCD Sensor
Lens: 4-9mm
Horizontal Resolution: 480 TV lines
Viewing Angle: 30-80 Degrees
Video System: Fixed PAL 50Hz or NTSC 60Hz
Electronic Shutter: 1/50 - 1/100000 sec. (PAL)
1/60 - 1/100000 sec. (NTSC)
Gain Control: Automatic
Backlight Compensation: Automatic
White Balance: Automatic
Minimum Illumination: 0.1 Lux / F1.2, 0 Lux (IR on)
Number of Infrared LEDs: 36
Infrared Wavelength: 850nm
Range in dark: Up to 35m (115ft)
Signal to Noise Ratio: >48dB
Operating Power: 12V DC
Size (camera only): 171mm x 100mm x 95mm
6.7” x 3.9” x 3.7”
Weight (camera only): 1.0kg (2.2lbs)
Operating Temperature: -10° - 50°C (14° - 122°F)
WARNING - IMPORTANT SAFETY INSTRUCTIONS
- To reduce fire or shock hazard do not expose the adapters to rain or moisture
- Do not use if any of the terminals or wires are exposed
- Use only the power adapter that is included in this pack in an upright or vertical
position
- Any modifications not approved by Swann Communications PTY LTD. may void
the warranty and the user’s ability to operate this product
33
22
11
44
22 77
E180908E180908
66
Adjusting the Focus & Zoom
The PRO-770 Camera is equipped with a 4-9mm vari-focal zoom lens for
customizing the subject and area of surveillance. Remove the rubber plugs on the
back of the camera to access the screws that control zoom and focus.
To adjust the level of zoom & focus, use a flathead screwdriver to turn the screws
until the desired zoom and clarity is reached. Replace the rubber plugs to prevent
moisture from entering the camera.
The PRO-770 Camera includes a wall or ceiling mount stand. To attach the stand,
use the included accessories as per the diagram below.
Install the rubber washers between the camera stand and bottom of camera to
ensure a strong and secure fitting.
Zoom and Focus
Adjustment
Zoom and Focus
Adjustment
TIP: Use a flathead screwdriver to turn
the zoom & focus screws inside the
camera body. View on a monitor while
adjusting the screws for easier setup
Back of cameraBack of camera
Affixing the Camera Stand
33
Camera
Bracket
Camera
Bracket
Bracket
Washers
Bracket
Washers
Bottom of
Camera
Bottom of
Camera
ScrewsScrews
DVR or MONITOR
With RCA Sockets
O T
U
I
N
O
V E
DI
D
VI
EO
D
U
A
O
I
D
A
IO
U
11
33
22
The PRO-770 Security Camera is compatible with all Swann Standalone DVR
Systems or any TV, VCR or DVR with BNC / RCA connections.
1. Connect the PRO-770 Camera to the BNC Extension Cable. Connect both DC
and BNC connections to the extension cable
2. Use the optional BNC to RCA adapter if connecting to a TV, VCR or other A/V
device. Otherwise, connect the BNC connector to your existing DVR
3. Connect the Power Adapter to DC connection on Extension Cable. When all
connections are complete, plug in the power adapter to an available power outlet
4. Tune your TV, VCR to the correct input channel to view the camera or turn on
your DVR to view
5. Tilt / aim the camera to the desired area of coverage
6. Adjust the lens focus as per instructions on page 3
7. Mount camera to desired location for permanent installation (if applicable)
Connecting PRO-770
5544
!
! Please test all devices before final installation as it is far easier to rectify
problems at this stage
! To avoid the risk of damage use only the supplied power adapter
! Areas with a bright background may cause degradation of the image. If possible
position your camera so that it doesn’t point towards a very bright light source
! Do not cut the DC power cable of the Camera to fit with another power source.
This may result in damage to the Camera and may void your warranty
Best Results are achieved when the camera is looking down on the subject area
1. Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs, is preferable to, and cheaper than,
cleaning up after it occurs
- the Swann PRO-770 Camera is an example of cost effective security utilising
the 'art of deterrence' to stop thieves and criminals
2. Always place cameras high enough that they can't be closely inspected or easily
accessed
3. Position cameras and dummies where they can be easily seen for maximum
deterrence
4. Position a monitor where it can be seen but not touched
5. If you have more than one camera use a monitor with channel switching function,
a Quad Processor or DVR with multiple views to show potential offenders the
level of coverage you have protecting your site
6. Add extra Swann dummy cameras to give the impression of heightened security.
7. Purchase a Swann DVR to monitor and record activity on your cameras.
Depending on the settings used, DVRs can record for months
8. Position a VCR with tapes or boxes close to your monitor for added effect,
implying there is a security video recorder even if there isn't one
Important Information about this product
Tips for using your Swann Security camera
DVR or MONITOR
With RCA Sockets
O T
U
I
N
O
V E
DI
D
VI
EO
D
U
A
O
I
D
A
IO
U
11
33
22
The PRO-770 Security Camera is compatible with all Swann Standalone DVR
Systems or any TV, VCR or DVR with BNC / RCA connections.
1. Connect the PRO-770 Camera to the BNC Extension Cable. Connect both DC
and BNC connections to the extension cable
2. Use the optional BNC to RCA adapter if connecting to a TV, VCR or other A/V
device. Otherwise, connect the BNC connector to your existing DVR
3. Connect the Power Adapter to DC connection on Extension Cable. When all
connections are complete, plug in the power adapter to an available power outlet
4. Tune your TV, VCR to the correct input channel to view the camera or turn on
your DVR to view
5. Tilt / aim the camera to the desired area of coverage
6. Adjust the lens focus as per instructions on page 3
7. Mount camera to desired location for permanent installation (if applicable)
Connecting PRO-770
5544
!
! Please test all devices before final installation as it is far easier to rectify
problems at this stage
! To avoid the risk of damage use only the supplied power adapter
! Areas with a bright background may cause degradation of the image. If possible
position your camera so that it doesn’t point towards a very bright light source
! Do not cut the DC power cable of the Camera to fit with another power source.
This may result in damage to the Camera and may void your warranty
Best Results are achieved when the camera is looking down on the subject area
1. Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs, is preferable to, and cheaper than,
cleaning up after it occurs
- the Swann PRO-770 Camera is an example of cost effective security utilising
the 'art of deterrence' to stop thieves and criminals
2. Always place cameras high enough that they can't be closely inspected or easily
accessed
3. Position cameras and dummies where they can be easily seen for maximum
deterrence
4. Position a monitor where it can be seen but not touched
5. If you have more than one camera use a monitor with channel switching function,
a Quad Processor or DVR with multiple views to show potential offenders the
level of coverage you have protecting your site
6. Add extra Swann dummy cameras to give the impression of heightened security.
7. Purchase a Swann DVR to monitor and record activity on your cameras.
Depending on the settings used, DVRs can record for months
8. Position a VCR with tapes or boxes close to your monitor for added effect,
implying there is a security video recorder even if there isn't one
Important Information about this product
Tips for using your Swann Security camera
66
Adjusting the Focus & Zoom
The PRO-770 Camera is equipped with a 4-9mm vari-focal zoom lens for
customizing the subject and area of surveillance. Remove the rubber plugs on the
back of the camera to access the screws that control zoom and focus.
To adjust the level of zoom & focus, use a flathead screwdriver to turn the screws
until the desired zoom and clarity is reached. Replace the rubber plugs to prevent
moisture from entering the camera.
The PRO-770 Camera includes a wall or ceiling mount stand. To attach the stand,
use the included accessories as per the diagram below.
Install the rubber washers between the camera stand and bottom of camera to
ensure a strong and secure fitting.
Zoom and Focus
Adjustment
Zoom and Focus
Adjustment
TIP: Use a flathead screwdriver to turn
the zoom & focus screws inside the
camera body. View on a monitor while
adjusting the screws for easier setup
Back of cameraBack of camera
Affixing the Camera Stand
33
Camera
Bracket
Camera
Bracket
Bracket
Washers
Bracket
Washers
Bottom of
Camera
Bottom of
Camera
ScrewsScrews
Thank you for purchasing the PRO-770 Security Camera by Swann. The
advanced design incorporates a high resolution CCD camera built into a rugged
weather-resistant casing. The PRO-770 is a versatile ceiling or wall-mounted
camera with the ability to zoom and focus with the built-in 4-9mm zoom lens. The
PRO-770 is compatible with standalone Swann DVR systems and recording
devices with BNC or RCA connections.
1 - PRO-770 Vandal-Resistant Dome Camera with Stand
2 - BNC Extension Cable
3 - Power Adapter
4 - BNC to RCA Adapter
5 - Manual & Accessories
If any of the contents are missing or damaged contact Swann for assistance
Technical Specifications
Introduction
Package Contents
NOTE: All jurisdictions have specific laws and regulations relating to the use of
cameras. Before using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and regulations that prohibit or
limit the use of cameras and to comply with the applicable laws and regulations.
The legality of watching people other than yourself changes from country to
country and even state to state. Contact your local government's privacy
information body or your local Police for more information on what if any
restrictions you may face.
PRO-770
Image Sensor: 1/3” Sony CCD Sensor
Lens: 4-9mm
Horizontal Resolution: 480 TV lines
Viewing Angle: 30-80 Degrees
Video System: Fixed PAL 50Hz or NTSC 60Hz
Electronic Shutter: 1/50 - 1/100000 sec. (PAL)
1/60 - 1/100000 sec. (NTSC)
Gain Control: Automatic
Backlight Compensation: Automatic
White Balance: Automatic
Minimum Illumination: 0.1 Lux / F1.2, 0 Lux (IR on)
Number of Infrared LEDs: 36
Infrared Wavelength: 850nm
Range in dark: Up to 35m (115ft)
Signal to Noise Ratio: >48dB
Operating Power: 12V DC
Size (camera only): 171mm x 100mm x 95mm
6.7” x 3.9” x 3.7”
Weight (camera only): 1.0kg (2.2lbs)
Operating Temperature: -10° - 50°C (14° - 122°F)
WARNING - IMPORTANT SAFETY INSTRUCTIONS
- To reduce fire or shock hazard do not expose the adapters to rain or moisture
- Do not use if any of the terminals or wires are exposed
- Use only the power adapter that is included in this pack in an upright or vertical
position
- Any modifications not approved by Swann Communications PTY LTD. may void
the warranty and the user’s ability to operate this product
33
22
11
44
22 77
E180908E180908
English
If this device does not work when you first plug it
in, do not take it back to the store.
Vari-Focal
Security Camera
Night Vision 115ft/35m
Contact the Swann Helpdesk using our fast e-mail service
[email protected] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Installation Guide
Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
product The
end user is responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
Warranty Information
www.swannsecurity.com
Swann Technical Support
All Countries E-mail: [email protected]
Telephone Helpdesk
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
UNITED STATES toll free
1-800-627-2799
1-877-274-3695
(Su, 2pm-10pm US PT)
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
USA Exchange & Repairs
562-777-2551
(M-F, 9am-5pm US PT)
AUSTRALIA toll free
1300 138 324
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
New Zealand toll free
0800 479 266
International
+61 3 8412 4610
Swann Communications USA Inc.
12636 Clark Street
Santa Fe Springs CA 90670
USA
Swann Communications PTY. LTD.
Building 4, 650 Church Street,
Richmond, Victoria 3121
Australia
WARNING: IMPORTANT NOTICE ABOUT CORRECT USE OF POWER ADAPTER
The correct orientation
for the enclosed power
adapter is in a vertical
or floor mount position
L’orientation correcte pour
L’adapteur secteur fourni
est dans une position
verticale ou plancher-
monte.
La orientacion correcta para
el adaptador electrico incluido
es en posicion vertical o instalado
en el suelo.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
PRO-770
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Swann PRO-770 Installation guide

PRO-770
Swann
Brand
Swann
Model
PRO-770
Category
Video surveillance kits
Type
Installation guide

Swann PRO-770 is a high-resolution security camera with a 4-9mm vari-focal zoom lens that allows you to customize the subject and area of surveillance. It features night vision with a range of up to 115ft/35m, making it suitable for low-light conditions. The camera is weather-resistant and can be mounted on a ceiling or wall. It is compatible with standalone Swann DVR systems and recording devices with BNC or RCA connections. The PRO-770 is easy to install and comes with a BNC extension cable, power adapter, and BNC to RCA adapter.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents