Intermec CN30 Quick start guide

Brand: Intermec

Model: CN30

Type: Quick start guide

Physical Dimensions

Length: 24.1 cm (9.5 in) with 56-Key Module

16.5 cm (6.5 in) with 14-Key Module

Width: 8.9 cm (3.5 in)

Depth: 3.3 cm (1.3 in)

Weight: 538-595g (19-21 oz) with 56-Key Module

340.1-396.9g (12-14 oz) with 14-Key Module

Power Specifications

Note: Specifications will vary based on system configuration

Operating: Rechargeable 2400 or 4800 mAh LiIon battery

Backup: System supplies 10 minutes bridge time while replacing battery or

keyboard module

Electrical Specifications

Model: CN30

Electrical rating: 3.7-5V, 3.5A

Temperature and Humidity Specifications

Operating temperature: -10°C to 50°C (-14°F to 122°F)

Operating humidity: 10 to 95% non–condensing

Storage temperature: –20°C to 70°C (–4°F to 158°F)

Storage humidity: 0 to 95% humidity, non–condensing

Now that the CN30 is working in your network, you may need additional information to

use the computer in your data collection system.

Go to the Intermec web site at www.intermec.com to find the manuals in PDF format.

If you experience any problems, please visit our product support web site at

intermec.custhelp.com to search for product specific information. To order acccessories

and printed documentation, contact your local Intermec

sales representative.

Patents: This product is protected by one or more patents. Refer to the CN30 Mobile

Computer User’s Manual for the list of patents.

CN30 Mobile Computer

Specifications

Documents Available: on Web in Print on CD

CN30 Mobile Computer User’s Manual X X

TE 2000 Terminal Emulation Programmer’s Guide X X X

Intermec Developer’s Library Resource Kits X

Wavelink Terminal Emulators™ Guide X

For More Information

Worldwide Headquarters

6001 36th Avenue West

Everett, Washington 98203

U.S.A.

tel 425.348.2600

www.intermec.com

CN30 Mobile Computer Quick Start Guide

P/N 930-189-001

*930-189-001*

Quick Start Guide

Thank you for purchasing the Intermec CN30 Mobile Computer, a rugged mobile com-

puter designed to deliver years of trouble-free service. As you unpack your CN30, verify

that you have the following items in the box:

• CN30 Console

• CN30 Mobile Computer Quick Start Guide P/N 930-189-001

• Product Warranty Card

• Compliance Statement/Declaration of Conformity

• Bluetooth Radio Compliance

• 802.11 Radio Compliance

After you remove the CN30 Mobile Computer from its shipping box, save the box and

packing material in case you need to ship or store your computer.

You should read this quick start guide if you are a system administrator or person installing

the CN30 in a network.

Additional information not covered in this guide is available in the CN30 Mobile Computer

User’s Manual.

Tethered Stylus and Handstrap

Your CN30 Mobile Computer comes with a tethered stylus pre-installed.

Other Accessories

• 10-Key Numeric Module

• 14-Key Module

• 56-Key Module

• 56-Key Module Battery Pack

• Scan Handle

•Belt Clip

•Charge Dock

• Quad Charger

• Handstrap

Contact your Intermec representative for more information or ordering accessories.

Out of the Box

CN30 Features

Docking Connector

Speaker

[I/O] Key

Stylus Holder

Good Scan/Intermec

Readiness Indicator

Backlight Key

Scan

Buttons

Side

Buttons

Microphone

Notification

Battery Status

Reset Switch

Headset Jack

Side

Buttons

CN30 Accessories

1 Installing and Charging the Battery

Charge the CN30 batteries in one of two devices:

•Charge Dock

•Quad Charger Dock

With the battery or module contacts aligned in the charger or dock, slide the battery or

module into one of the charging bays. Push the battery or module into the slot to engage

the latch. The status light for that slot will illuminate and indicate charge status per the

chart below.

The CN30 console is designed to have a battery in place at all times. When you remove a

discharged battery, replace it with a charged battery within 10 minutes to prevent loss of

data. If a charged battery is not available, leave the discharged battery attached to the

CN30 console until a charged battery is available.

Battery LED Status Explanation

2 Turning on the CN30

• Press and release the yellow (I) key to turn the CN30 on or off. To conserve

battery power, your CN30 turns itself off during periods of inactivity.

Using the Keyboard

Based on the keyboard module option and overlay on your unit, your CN30 may have

color-coded keys to let you access additional characters, symbols, and functions printed

on the overlay. Refer to this table as a guide to using the color-coded keys. The orange and

green function keys will illuminate when activated.

For example, to activate the Caps key: Press [orange] then the Shift key.

When your CN30 is powered up for the first time, you will see the splash screen appear.

Follow the on-screen instructions until you reach the Today screen.

Using Start and the Task Bar

The Start button in the upper left corner of the display accesses the system menu, which

provides access to Programs and Control Panel Settings.

The Task bar across the bottom of the display allows you to switch between running

applications and bringing up the Input Panel.

3 Secure Digital Card

You can use a Secure Digital (SD) card to increase file storage and install software. The

Secure Digital card slot is located on the side of the CN30 next to the display. For best

results, use only Intermec-approved SD cards.

To insert a Secure Digital card:

1 Remove the SD card slot cover.

2 Gently insert the SD card into the card slot with the label side facing the display.

3 Push the card into the slot until it latches in place.

4 Replace the Secure Digital card slot door over the opening and tighten the two screws.

4 Intermec Settings

Intermec Settings is an Intermec application that allows you to easily configure your CN30

Mobile Computer. These screen shots show you the areas on your CN30 that you can

branch out to configure.

For complete details refer to the Intermec Computer Command Reference Manual P/N:

73529 and the CN30 Mobile Computer User’s Manual P/N: 961-054-039.

Note: The battery in the 14-Key and Numeric Module is not user replaceable.

LED Color Explanation

No Battery or Module Installed Off

Charge Cycle in Progress Red

Charge Cycle Complete Green

The Battery is Not Charging Ye ll ow

56-Key

Module

14-Key

Module

Battery

Pack

Docking

Bay

Charging

Bay

You Wa n t To : Press:

Use an orange character or function printed above a key. [orange] key then the actual key

Use a green character or function printed above a key. [green] key then the actual key

SD Card Slot

Tap on

Intermec

Settings

Applet

CK30 Mobile Computer Quick Start Guide

CN30 Mobile Computer Quick Start Guide

Intermec CN30 Quick start guide

Intermec CN30 Quick start guide

Intermec CN30 Quick start guide

Related papers

Other documents