Titan 8' Crescent Firewood Rack User manual

  • Hello! I am an AI chatbot trained to assist you with the Titan 8' Crescent Firewood Rack User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
XL Crescent Log Rack
OWNER’S MANUAL
MPN: CLOGRXLv2; SKU: 899907
Diagram #
Description
Image
Qty
1
Legs
4
2
Feet
2
3
Long Bolt + Spring
Washer, Washer,
Nut
4
4
Short Bolt + Spring
Washer, Washer,
Nut
10
5
Lower Tube (3
bolt-holes)
2
6
Upper Tube (2
bolt-holes)
2
7
Side-Wall Tube
4
2
8
Support Bracket
3
WARNING FOR CALIFORNIA RESIDENTS: Burning fireplace or wood stove fuels
such as natural firewood results in emission of carbon monoxide, soot, and other
combustion by-products which are known by the State of California to cause
cancer, birth defects, or reproductive harm.
ASSEMBLY INSTRUCTION
1. Slide short side of Legs (part 1) onto the Feet (part 2). Align holes, insert Short Bolt and
attach with Washer, Spring Washer, and Nut (part 4).
2. Slide Upper Tubes (part 6) into Legs (part 1). DO NOT BOLT IN YET!
3. Slide 2 Side-Wall Tubes (part 7) into each Lower Tube (part 5). DO NOT BOLT
TOGETHER YET! This step should result in 2 large U-shaped crescents.
3
4. Bolt each U-shaped crescent to the INSIDE of your base using the Long Bolt (part 3)
secured with the washer, spring washer, and nut. Hand tighten only!
5. Bolt in the 3 Support Brackets (part 8) using the Short Bolts (part 4) secured with the
washers, spring washers, and nuts. Tighten down fully using a wrench.
6. Once you have ensured all tubes are seated and aligned properly, go back and tighten all
remaining bolts with a wrench. Be careful not to over-tighten as this could damage the
tubing.
4
1/4