92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com
PRODUCT MANUAL
VOLUME CONTROL
The Volume Control Add-On is a non-destructive, plug-and-play addition to an existing Pure pickup.
INSTALLATION
1. Simply unscrew the existing endpin jack, remove it from the endpin hole, and remove all nuts and washers
from it (keep them in a safe place!).
2. Tighten the endpin jack’s screw cap all the way and plug it into the 1/4" plug of the volume control element.
3. The 1/4" plug has a self-adhesive fastener, which can be secured
inside the guitar in a hidden area.
4. Attach it to the instruments bottom or to a bottom brace.
5. The lightweight thumbwheel control attaches with a peel-and-stick
adhesive to the inner edge of the sound-hole (see picture). The
adhesive is already attached to the unit, simply peel off the
backing and attach where desired.
6. Secure all wires with the self-adhesive clips provided in the
package. Mount the new endpin jack into the endpin hole, and
you're done!
PURE + VOLUME CONTROL
Please follow the included installation instruction for the pickup and mount the volume control as described
above. The RCA connection between pickup and volume control should be attached to the instrument’s bottom
or to a bottom brace, in a hidden area inside the guitar.
/
