De Dietrich MC-2LSAXNAT Owner's manual

Brand: De Dietrich

Model: MC-2LSAXNAT

Category: Hobs

Type: Owner's manual

FR GUIDE D’INSTALLATION ET D’UTILISATION

CS NÁVOD K INSTALACI A POUŽITÍ

DE MONTAGE- UND GEBRAUCHSANLEITUNG

EN INSTALLATION AND USE GUIDE

Table de cuisson

Varná deska

Kochfeld

Cooking hob

CZ5700058_B_ML.qxp 30/09/2009 13:55 Page 1

As part of our commitment to the constant improvement of our products, we reserve the right to

alter their technical, functional and/or aesthetic characteristics as part of their continuous

development.

IImmppoorrttaanntt nnoottee

: Please read this Installation and Use Guide carefully before using the

appliance, as this will help you to quickly familiarise yourself with its operation.

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 47

TABLE OF CONTENTS

••

Safety guidelines

___________________________________________

••

Caring for the environment

__________________________________

••

Description of your appliance

________________________________

1 / INSTALLING YOUR APPLIANCE

••

Choice of location

__________________________________________

••

Fitting

____________________________________________________

••

Fitting recommendations

____________________________________

••

Electrical connection

_______________________________________

••

Gas connection

____________________________________________

••

Changing the gas supply

____________________________________

2 / USING YOUR APPLIANCE

••

Description of the hob

______________________________________

••

Switching on the gas burners

________________________________

••

Suitable cookware for gas burners

____________________________

3 / ROUTINE CARE OF YOUR APPLIANCE

••

Caring for your appliance

____________________________________

4 / SPECIAL INSTRUCTIONS, TROUBLESHOOTING

••

During use

________________________________________________

5 / SOME RECOMMENDATIONS

___________________________________

6 / COOKING CHART

••

Gas cooking guide

_________________________________________

7 / AFTER-SALES SERVICE

••

Repairs

___________________________________________________

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 48

SAFETY GUIDELINES

——

This cooking hob has been designed for

private domestic use.

——

This appliance must be installed in

compliance with current, applicable

regulations and used only in a well-ventilated

location. Consult this guide before installing

and using your appliance.

——

Never leave the appliance unattended when

in use.

——

This cooking hob is intended solely for

cooking food and drinks and does not contain

any asbestos-based materials.

——

This appliance is not connected to a

combustion by-product disposal system. It

must be installed and connected in

compliance with current legislation. Special

attention should be given to applicable

ventilation regulations.

——

Do not store

CCLLEEAANNIINNGG PPRROODDUUCCTTSS

IINNFFLLAAMMMMAABBLLEE PPRROODDUUCCTTSS

(aerosol cans or

pressurised containers, or papers,

cookbooks, etc.) in the cabinet underneath

your cooking hob.

— If there is a drawer located below the hob,

we recommend that you avoid using it to

store items that are heat sensitive (plastic,

papers, aerosol cans, etc.).

——

Your hob must be disconnected from the

power supply (electricity and gas) before

undertaking any repair work.

——

If you plug electrical appliances into a

socket in close proximity to the hob, ensure

that no cable comes into contact with the hot

zones.

——

As a safety measure, remember to shut-off

the mains gas supply tap or the

butane/propane gas cylinder tap (whichever

is applicable)after use.

——

This appliance carries the

CCEE

compliance

mark.

——

Installation should only be carried out by

qualified installers and technicians.

——

Before installation, ensure that the local

distribution conditions (gas type and

pressure) and the appliance configuration are

compatible.

— This appliance is not intended to be used by

persons (including children) with reduced

physical, sensory or mental abilities, or those

lacking experience or awareness, unless they

are supervised by someone responsible for

their safety or they have received suitable

training in its operation from such a person.

Children should be watched to ensure that

they do not play with the appliance.

——

This hob meets standard EN 60335-2-6

relating to the heating of cabinets and the

Class 3 standard with regard to its installation

(as per standard EN 30-1-1).

••

Warning

The settings for this hob are printed

on a sticker inside the instruction guide

pouch and on the packaging.

So that you can easily locate any reference

information concerning your appliance, we

recommend that you make a note of it on

the “After-Sales Service Department and

Customer Relations” page (this page also

explains where this information may be

found on your appliance).

In the event of a crack appearing in the

glass top, immediately disconnect the

appliance and contact the After-Sales

Service department.

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 49

CARING FOR THE ENVIRONMENT

••

— This appliance’s packing materials can be

recycled. Please recycle the packaging and

share in the protection of the environment by

depositing it in municipal containers provided

for this purpose.

— Your appliance also contains

many recyclable materials. It is

therefore marked with this logo to

indicate that used appliances

should not be disposed of with

other waste. The manufacturer will

organise the recycling of the

appliances under optimum conditions, in

accordance with European directive

EC/2002/96 governing electrical and

electronic equipment waste. Consult your

local authority or your retailer to find the

drop-off points for used appliances nearest

to your home.

— Thank you for your help in protecting the

environment.

CARING FOR THE ENVIRONMENT

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 50

DESCRIPTION OF YOUR APPLIANCE

••

DESCRIPTION OF THE HOB

Burner cover

Burner head

Injector

Spark igniter

Thermocouple

Knob

Gasket

Valve

Important’

This Installation and Use guide covers several models. There may be minor differences

in the details and fittings on your appliance and the description provided.

Grill

support

pan

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 51

/ INSTALLING YOUR APPLIANCE

••

CHOICE OF LOCATION

Your appliance should be flush mounted

above a supporting cabinet in a worktop that

is a minimum of 3 cm thick and made of a

material that is heat resistant or that is

covered with such a material.

A minimum distance of 30 cm either side of

the hob should be kept free from any

obstructions (cabinet or panel) which could

hinder the safe handling of cooking utensils.

If a horizontal divider wall is positioned under

the hob, it must be located between 10 cm and

15 cm from the top of the work surface. In any

event, do not store aerosol cans or

pressurised containers in any compartment

under the hob (refer to the

“

Safety

Recommendations

”

) chapter.

FITTING

To ensure a tight connection between the hob

and the work top, the seal supplied in the

pouch should be glued in place prior to

installing the hob:

See

(Fig. 01)

——

Remove the pan supports, burner covers

and burner heads, noting their position.

— Turn the hob over and carefully place it on

top of the opening in the cabinet to prevent

damage to the knobs and spark igniters.

— To ensure a good seal between the housing

and the worktop, stick the foam seal

aarroouunndd

tthhee eeddggee ooff tthhee hhoouussiinngg

(Fig. 02

••

49 cm mini

3 cm mini

30 cm mini

26,5 cm

30 cm mini

5,8 cm mini

70 cm mini

Fig. 01

Fig. 02

Housing

Seal

APPLIANCE

Standard

cabinet

cut-out

Overall

dimensions

above

the work

surface

Overall

dimensions

below

the work

surface

Width

26.5 cm

29.3 cm

26.3 cm

Depth

49 cm

52.5 cm

47.9 cm

Thickness

depending

on cabinet

5.4 cm

5.1 cm

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 52

/ INSTALLING YOUR APPLIANCE

— Place your hob in the support cabinet

opening and carefully draw it towards you.

— Replace the burner heads, burner covers

and pan supports on the hob.

Connect the hob to the gas supply (See “Gas

Connection” chapter) and to the power

supply (See “Electrical Connection” chapter).

— If you wish, you can secure the hob by using

the four mounting brackets and screws

supplied

(Fig. 02)

by fixing them to the four

corners of the housing.

YYoouu mmuusstt uussee tthhee

hhoolleess pprroovviiddeedd ffoorr tthhiiss ppuurrppoossee,, aass sshhoowwnn iinn

tthhee ddiiaaggrraamm aabboovvee

(Fig. 01)

—

SSttoopp ssccrreewwiinngg wwhheenn tthhee ffiixxiinngg bbrraacckkeett

ssttaarrttss ttoo ppuullll oouutt ooff sshhaappee..

DDoo nnoott uussee aa ppoowweerr ssccrreewwddrriivveerr

Fig. 01

Fig. 02

Mounting bracket

Screw

Underside view

of the housing

••

FITTING RECOMMENDATIONS

Fixing holes

••

Cabinet

ELECTRICAL CONNECTION

Your hob must be connected to a 220-240 V

single phase mains supply via a standard IEC

60083 2-pole + earth electrical plug or an all-pole

isolator, in compliance with the current

regulations.

The electrical plug must remain accessible after

installation.

Warning

The safety wire (green/yellow) must be

connected to the appliance’s earth terminal

and must be connected to the installation

earth terminal . A 10 Amp fuse must be

used in the installation. If the power cable is

damaged, it must be replaced by a cable or a

special kit, available from the manufacturer or

its After-Sales Service Network.

Tip

Using a gas cooking appliance

generates heat and humidity in the room

where it is installed.

MMaakkee ssuurree tthhaatt yyoouurr

kkiittcchheenn iiss wweellll--vveennttiillaatteedd::

keep natural

ventilation openings unobstructed or install a

ventilation device (mechanical ventilation

hood). Intensive or prolonged use of the

appliance may require additional ventilation;

you could, for example, open a window or

provide more effective ventilation by

increasing the setting on the mechanical

ventilator, if one is being used. (a minimum air

flow of 2 m

/hr per kW of gas power is

required).

For example: 30 cm - 2 gas burners

Total power: 1.5 + 2.95 = 4.45 kW

4.45 kW x 2 = 8.9 m

minimum flow.

AABBLLEE SSEECCTTIIOONN TTOO BBEE UUSSEEDD

H05V2V2F -T90 cable

After-sales ref.:

77x9060

Conductor section in

Fuse

222200--224400 VV

-- 5500 HHzz

3 conductors including

1 earth

10 A

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 53

/ INSTALLING YOUR APPLIANCE

The gas connection must be installed in

compliance with current regulations in the

country of installation.

• Gas distributed via natural gas

pipework,

For your safety, you must choose one of the

following three connection options:

— Connection using rigid copper pipe

with

screw-on mechanical connectors (G1/2 gas

standard mark). Connect directly to the elbow

fitted on the appliance.

— Connection with a flexible metal hose

(stainless steel)

with screw-on mechanical

connectors

(meeting standard NF D 36-121)

with unlimited life

(Fig. A).

— Connection using a reinforced rubber

hose

with screw-on mechanical

connectors

(meeting standard NF D 36-103) with a 10 year

service life guarantee

(Fig. B).

Warning

If you have to change the orientation

of the elbow fitted on the appliance when

connecting the gas supply to your hob:

①①

Change the sealing washer.

②②

Tighten the elbow nut but do not exceed

17 N.m. torque.

GAS CONNECTION

• Preliminary remarks

If your hob is installed above an oven or if the proximity of other heating elements risks causing

the connection to overheat, rigid pipe should be used for the installation.

If a flexible hose or pipe is used (as is the case with bottled butane), it must not come into

contact with any moving part of the cabinet or be positioned where it might become snagged.

••

Fig. A

Fig. B

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 54

/ INSTALLING YOUR APPLIANCE

The table below shows where the injectors

should be positioned on your appliance,

depending on the type of gas used.

The number is marked on each injector.

The table below shows where the injectors are positioned on your appliance.

The number is marked on each injector.

IIDDEENNTTIIFFYYIINNGG TTHHEE IINNJJEECCTTOORRSS

IIDDEENNTTIIFFIICCAATTIIOONN OOFF TTHHEE IINNJJEECCTTOORRSS

NNaattuurraall GGaass

111144

99AA

Example:

injector reference

•Gas Properties

AApppplliiaannccee iinntteennddeedd ttoo bbee iinnssttaalllleedd ffoorr uussee wwiitthh:: NNaattuurraall

ggaass

HHUU..........................................................ccaatt II:: 22H

G20

Hourly rate below: 25 mbar

at 15°C below 1013 mbars

UUPPEERR

FFAASSTT BBUURRNNEERR

Marking on injector

111144

Nominal heat release rate (kW) 2,95

Reduced heat release rate (kW) 0,950

Hourly rate (g/hr)

Hourly rate (l/hr) 281

EEMMII

FFAASSTT BBUURRNNEERR

Marking on injector

99AA

Nominal heat release rate (kW) 1,50

Reduced heat release rate (with safety) (kW) 0,700

Hourly rate (g/hr)

Hourly rate (l/hr) 143

GGAASS BBUURRNNEERR HHOOBB

Total heat release rate (kW) 4,45

Maximum flow rate (g/hr)

(l/hr) 424

CHANGING THE GAS SUPPLY

••

• Identifying the injectors

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 55

/ USING YOUR APPLIANCE

DESCRIPTION OF THE HOB

••

Semi-fast burner 1.50 kW

((**))

Super-fast burner, 2.95 kW

((**))

Power obtained with G20 natural gas

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 56

/ USING YOUR APPLIANCE

SWITCHING ON THE GAS

BURNERS

Gas is supplied to each burner via a valve

which is opened by pressing and turning the

gas control knob anti-clockwise.

The black spot

“

●

”

indicates the closed

position.

——

Choose the desired burner by using the

symbols located near the control knobs (e.g.:

rear burner ).

The control knobs on your hob are fitted with

an integrated burner-ignition system.

——

To light a burner, press in and turn the

control knob anti-clockwise to the

maximum setting .

——

Hold down the control knob to produce a

series of sparks until the burner lights.

The setting for more moderate flame

intensities is between the and the

symbols.

Tip

If a control knob becomes difficult to

turn, do not force it. Call your installer for

an emergency visit.

If a flame is extinguished accidentally,

re-light it as normal following the lighting

instructions.

••

Fig. 01

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 57

/ USING YOUR APPLIANCE

••

CCOORRRREECCTT

IINNCCOORRRREECCTT

CCOONNVVEEXX

CCOONNCCAAVVEE

Fig. 01

Fig. 02

Fig. 03

SUITABLE COOKWARE FOR GAS BURNERS

• Which burner should you use for a particular pan?

Warning

— Adjust the ring of flames so that it

does not extend beyond the edge of the pan

(Fig. 01).

— Do not use concave or convex pans without

appropriate supports (Fig. 02).

— Do not use cookware that partially covers

the knobs.

— Do not leave empty cookware over an

ignited gas burner.

— Do not use heat regulators, toasters, steel

meat grills or stewpots with feet which rest

on or touch the glass worktop (Fig. 03).

PPaann ddiiaammeetteerr

1188 ttoo 2288 ccmm

1122 ttoo 2200 ccmm

BBuurrnneerr DDiiaammeetteerr

SSuuppeerr ffaasstt

SSeemmii--ffaasstt

UUssee

FFrryyiinngg -- BBooiilliinngg

SSeeaarri

inngg ffooooddss

SSaauucceess -- RReehheeaattiinngg

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 58

33 //

ROUTINE CARE OF YOUR APPLIANCE

PPRROODDUUCCTTSS//AACCCCEESSSSOORRIIEESS

TTOO UUSSEE

.Small, stiff-bristled brush.

. Safety pin

. Gentle scouring cream.

. Cleaning sponge.

- Cleaning sponge.

- Special vitroceramic glass

products (e.g.: Cera-clean).

Warning

- Never clean your appliance while it is in operation. Set all the electric and gas

controls to zero.

- If a crack appears in the surface of the glass, disconnect your appliance immediately to

prevent the risk of electric shock. Contact the After-Sales Service Department.

Tip

—

We recommend cleaning hob fittings by hand rather than in a dishwasher.

—

Do not use an abrasive sponge to clean your hob.

—

Do not use steam cleaning.

CARING FOR YOUR APPLIANCE

••

MMAAIINNTTEENNAANNCCEE............

Of the spark igniters

and injectors

Of the pan supports

and gas burners

Of the glass top

WWHHAATT TTOO DDOO

If the spark igniters become clogged, clean them

using a small, stiff-bristled brush (non-metallic).

The gas injector is located in the centre of the

burner in the bowl shape. Be sure not to block

the injector during cleaning, as this will adversely

affect hob performance. Use a safety pin to

unblock the injector if necessary.

For tough stains, use a non-abrasive cream,

then rinse with clean water. Carefully wipe each

part of the burner before using your hob again.

- Clean with warm water and then wipe. For

tough stains, use products intended for

vitroceramic glass.

We recommend the use of Clearit cleaning products to maintain your appliance.

Clearit offers professional products and solutions designed for the daily care of your

household appliances and kitchens.

They are sold by your usual retailer, along with a complete range of accessories and

consumables.

PPrrooffeessssiioonnaall eexxppeerrttiissee aatt tthhee sseerrvviiccee ooff ddoommeessttiicc ccoonnssuummeerrss..

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 59

44 //

SPECIAL INSTRUCTIONS, TROUBLESHOOTING

DURING USE

••

/ SOME RECOMMENDATIONS

Lighting the gas safely

Use of cookware

General maintenance

Tips

. Press and hold the control knob for a few seconds after the

flame appears in order to engage the safety system.

. If there is a power failure, a burner may be lit by holding a

match near to it and pushing down the relevant control knob at

the same time.

. Always use stable, heat-resistant cookware with a flat bottom

for gas cooking.

. Clean the burners regularly: this is essential for their correct

operation and to ensure a stable and even flame.

. Do not forget the check the spark igniters. Thoroughly dry

the burners and burner covers before replacing them.

. Finish cleaning by wiping the glass worktop using a piece of

absorbent paper to remove any traces of damp.

. Once water starts to boil, reduce the burner’s heat to prevent

spillage.

. Cover your saucepans with lids to save energy.

Tip

—

In all cases, carefully read the instruction booklet for more detailed information.

PROBLEM: SOLUTION

•

Burner ignition:

No sparks appear when the control

knobs are pressed.

. Check the electrical connection.

. Check that the spark igniters are clean.

. Check that the burners are clean and correctly assembled.

. If the hob is secured to the work top, check that the mounting

brackets are not deformed.

. Check that the gaskets under the control knobs are not out of

position.

•

When you push a control knob,

sparks appear on all burners

simultaneously.

This is normal. The ignition function is centralised and controls

all burners simultaneously.

•

In reduced heat mode, the burner

goes out or the flames remain high.

. Ensure that there are no strong air currents in the room.

. Check that the gas type being used corresponds to the

injectors installed (see injector identification in the “Changing

the Gas Supply” chapter).

Reminder: Cooking hobs are sold pre-set for use with mains gas

(natural gas).

. Check that the burner low power screws are properly set (See

the “Changing the Gas Supply” chapter).

•

The flames look uneven.

. Check the cleanliness of the burners and the injectors under

the burners, the assembly of the burners, etc.

. Check that there is sufficient gas in the cylinder.

•

During cooking, the knobs

become hot.

. Use small saucepans on the burners located closest to the

control knobs. Larger saucepans should be placed on the

largest burners, which are furthest from the knobs. Saucepan

must be correctly positioned in the centre of the burner.

Saucepans should not hang over the control knobs.

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 60

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 61

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 62

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 63

/ COOKING CHART

Any repairs to your appliance must be carried

out by a qualified professional authorised to

work on this brand. When you call, state your

appliance’s complete reference information

(model, type, serial number). This information

appears on the manufacturer’s nameplate

which is located on the underside of the

appliance

(Fig. 01).

ORIGINAL PARTS

During any servicing, request the use of

genuine replacement parts only.

FFaaggoorrBBrraannddtt SSAASS,, tteennaanntt--mmaannaaggeerr –– SSAASS wwiitthh

sshhaarree ccaappiittaall ooff 2200 000000 000000 eeuurrooss RRCCSS

NNaanntteerrrree 444400 330033 119966..

/ AFTER-SALES SERVICE

Fig. 01

GAS COOKING GUIDE

••

SERVICE CALLS

••

FFOOOODD TTIIMMEE SSUUPPEERR SSEEMMII--

FFAASSTT FFAASSTT

SSOOUUPPSS

Broths 8-10 minutes

Thick soups

FFIISSHH

Court-bouillon 8-10 minutes

Grills 8-10 minutes

SSAAUUCCEESS

Hollandaise, Bearnaise

Béchamel, aurore 10 minutes

VVEEGGEETTAA--

Chicory, spinach

BBLLEESS

Cooked peas 25-30 minutes

Provençal tomatoes 15-20 minutes

Browned potatoes

Pasta

MMEEAATTSS

Steak

Blanquette, Osso-bucco 90 minutes

Pan-fried escalopes 10-12 minutes

Tournedos 10 minutes

FFRRYYIINNGG

Chips

Fritters

DDEESSSSEERRTTSS

Rice pudding 25 minutes

Fruit compotes

XX XX

Crêpes/Pancakes 3-4 minutes

Chocolate 3-4 minutes

Custard 10 minutes

Coffee (small percolator)

CZ5700058 - 09/09

Réf. : 2MCF-2GSAXNAT*

CZ5700058_B_ML.qxp 30/09/2009 13:57 Page 64

De Dietrich MC-2LSAXNAT Owner's manual

Brand: De Dietrich

Model: MC-2LSAXNAT

Category: Hobs

Type: Owner's manual

Download PDF

report

De Dietrich MC-2LSAXNAT Owner's manual

De Dietrich MC-2LSAXNAT Owner's manual

Related papers

Other documents