If your vehicle is in
PARK
(P),
you can recall mirror and
seating positions by pressing and holding one of the
three memory buttons. This will adjust the seat and
mirrors
to
where you have previously programmed
them. Seat and mirror movement is immediately stopped
if the memory button is released or if a seat or mirror
control is moved.
Note that the exterior mirrors will only adjust when the
ignition is turned on.
Heated Front Seat (Option)
The controls
are
located
next to the radio on the
center console. Press this
button to
turn
on the
heating element
in
the
seat. The seatback and
cushion are warmed
until they approximate
body temperature.
A
telltale light in the button reminds you that the heating
system is in use. The heated seats can only be used when
the ignition is turned on.
Reclining Front Seatbacks
This
feature is found on
the passenger’s seat only.
The manual recliner
control is located on the
outboard side of the
passenger’s seat below the
lumbar controls. See
“Manual Lumbar Support”
earlier in this section.
To
move the seatback forward, turn the hand-wheel
control forward. Note that this seatback folds forward all
the way down,
if
needed, to provide extra storage.
Turn the control rearward to recline the seatback.