2. VISUAL COMFORT
  3. TOB1400

VISUAL COMFORT TOB1400 User manual

  • I have reviewed the assembly instructions for the Visual Comfort Neith Large Tripod Floor Lamp, model TOB1400. The manual outlines the steps for assembling the lamp, including installing the harp, shade, and bulb, as well as important care instructions. I am ready to answer any questions you might have about setting up or maintaining your new floor lamp.
  • What tools are required for assembly?
    Is a bulb included with the lamp?
    How should I clean the lamp?
Neith Large Tripod Floor Lamp
Item # TOB1400
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install the harp (C) by squeezing together and inserting into top of
saddle (D).
3. Remove finial (A) from harp (C).
4. Remove shade (B) from packaging and install to harp (C) using
finial (A).
NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages.
5. Install light bulb into the socket.
6. Remove protective cover (E) from plug.
7. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
NOTICE:
Bulb not included
E
D
C
B (Packaged separately)
A
US
M
L
I
D
S
E
T
LED
TOOLS REQUIRED (NOT INCLUDED):
Scissors
/