How to Read a SoundTube Tap Switch

MSE Audio How to Read a SoundTube Tap Switch Operating instructions

  • Hello! I'm a chat assistant and I've analyzed the provided user manual for SoundTube tap switches. This document covers how to read and set the tap switches for the RSi series, HPi series, CMi series, SMi series, and XT series and includes instructions for low impedance, 70V, 100V, and 25V modes. I'm ready to answer your questions about the content and usage of these tap switches.
  • How to set low impedance mode?
    How to set 70V mode?
    How to set 100V mode?
    How to set 25V mode?
HOW TO READ A
SOUNDTUBE TAP SWITCH
Low impedance
setting
100V side
70V, 25V
side
Example below is of RS600i, tapped to low impedance mode
(Applies to RSi series, HPi series, CMi series, SMi series, XT series)
Low impedance/transformer-bypass mode: Match up the Ω symbol to both arrows (like shown above).
70V mode: Line up the desired tap setting with the arrow next to the 70V symbol
100V mode: Line up the desired tap setting with the arrow next to the 100V symbol
25V mode: Use the smaller red text on the 70V side and line up the desired tap setting with the
arrow next to the 70V symbol
70V
100V
6
9
1
7
3
3
X
3
6
9
1
7
3
3
.
6
3
1
.
3
2
.
5
5
25V
/