2. aventon
  3. PACE 500
PACE 500

aventon PACE 500 User guide

  • Hello! I've reviewed the Pace 500 E-Bike user guide. This document provides everything you need to get started with your new bike, including how to use pedal assist and throttle. I'm ready to answer your questions about its features, charging process, or any other aspect from the document.
  • How do I turn on the Pace 500 E-Bike?
    How do I start and use the pedal assist?
    How does the throttle work?
    How can I charge the battery?
    What happens when I stop pedaling or squeeze the brakes?
PACE 500 QUICK START GUIDE
PACE 500 QUICK START GUIDE
(Throttle On Demand)
SPEED INDICATOR
(Current / Max / Average)
5 LEVELS OF ASSIST
(0: No Assist. 5: Max Assist)
WALK MODE
(On / O)
DISTANCE INDICATOR
(Current Trip / System Mileage)
ERROR CODE INDICATOR
(In the Event of a Problem)
BACKLIGHT INDICATOR
(On / O)
BATTERY LEVEL INDICATOR
(Current / Max / Average)
VOLTAGE OUTPUT INDICATOR
(Real-Time)
GETTING STARTED
First, turn on the power switch on the battery itself. Then press and
hold the “M” button on the control pad for 3 seconds to power up the
system. While the bike and display are powered on, press and hold
“M” for 3 seconds to turn o.
The Pace 500 E-Bike oers pedal assist. When using pedal assist, an
electric motor supplements the rider’s own eort. To use the pedal
assist, simply start pedaling, then tap the “U” or “D” arrows to increase
or decrease the amount of pedal assist. Pedal assist will engage at
speeds up to 28 MPH.
The Pace 500 E-Bike is equipped with a throttle, which is mounted
near the rider’s left thumb, to propel the bike without pedaling. You
can engage the throttle anytime including from a complete stop while
in PAS 1 through 5. However, we strongly encourage you to pedal first
before engaging the throttle. The throttle can propel you at speeds up
to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake levers,
or release the throttle. Simply start pedaling again to re-engage the
motor.
BATTERY AND CHARGING
We recommend charging the battery o the bike indoors, in moderate
temperature conditions. To charge the battery, plug the charger into
the charging port and then connect the charger to a wall outlet. The
LED indicator light will be red when charging and will turn green when
charging is complete.
MAINTENANCE AND SERVICE
Properly maintaining your Pace 500 ensures it’s longevity and smooth
operation. Before assembling your bike, please watch the “How To
Assemble” video we’ve prepared for you. If you have questions during
the assembly process, please contact Aventon at (866) 300-3311 or
email [email protected].
SAFETY
You should wear an approved bicycle helmet every time you ride a
bicycle, regardless of the legal requirement to do so. Additionally,
some jurisdictions require helmet use when riding Class III E-Bikes
like the Pace 500. You should comply with local law when riding your
Aventon bicycle.
/