Arctic Air AAPC-PD27 User guide

Type
User guide
1345
6
7 8
911
MAX
MAX
MAX
7
*
*
*
IMPORTANT: If you do not plan to use Arctic Air
Pure Chill 2.0 for an extended period of time,
it is recommended that you empty and let unit &
cartridge dry before storing.This will avoid mold
and unpleasant smells, and prolong life of Arctic
Air Pure Chill 2.0 and the cartridge.
MAX
MAX
4
*
FOR BEST RESULTS:
DO NOT RETURN TO STORE
We can help! If your product is not
working or if you have any questions:
Web: www.PureChillFAQ.com
Call: 1-877-308-4504
Please Note: You may notice some condensation
forming on the front grill. This is normal.
DO NOT USE ARCTIC AIR™ PURE CHILL™ 2.0 WITHOUT CARTRIDGE.
WATER MAY LEAK OUT ONTO FLOOR.
For best results, turn this card over.
QUICK START GUIDE:
Plug in your Arctic Air™ Pure Chill™ 2.0
Fill tank with water using a pitcher
Turn on the unit & enjoy!
NEW FEATURES:
.
To ACTIVATE COOLING, soak your cartridge under
running cold water.
Place on a flat surface & fill tank from a water pitcher.
For MAXIMUM COOLING, place a wet cartridge
in the freezer until frozen.
Point towards you and adjust the vents to direct the air flow.
PRE-SOAK CARTRIDGE:
PRE-SOAK CARTRIDGE: PLACE IN FREEZER:
FILL WITH PITCHER: SET AIR FLOW:
Press + to start TURBO MODE for maximum fan
power and cooling.
Control high or low cooling output by
pressing button.
TURBO MODE: COOLING CONTROL:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Arctic Air AAPC-PD27 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI