2. Server
  3. DFD-ST

Server DFD-ST Operating instructions

  • Hello! I've reviewed the user manual for the Dispenser Stand DFD-ST. This document outlines the steps for setting up the stand, including how to insert dispensers, remove protective vinyl, and proper cleaning procedures. It also specifies the types of cleaners to use and avoid. I'm ready to answer any questions you have about the document or the dispenser stand.
  • What should I do before first use?
    How to clean dispenser stand?
    What type of cleaners should I use?
• Sanitize all parts according to local
sanitization requirements. All parts in
contact with food must be sanitized.
• External surfaces may be wiped clean
with a clean damp cloth.
• Glass and surface cleaners approved for
use in food contact areas may be used.
• Do not use abrasive, caustic or ammonia
based cleansers.
• Do not use metal scrapers or cleaning
pads that could scratch surfaces.
CLEANING
Manual #EQSG_01755_RevB 080122
INSERT
DISPENSER(S)
into bracket(s)
on stand.
PEEL
PROTECTIVE
VINYL OFF
of crumb catch.
SLIMLINE™ STAND
MODEL: DFD-ST
NEED HELP?
Please be prepared with your Model, P/N and
Series located on the lid or base of the unit.
Example:
Chat with us!
[email protected]
262.628.5600 | 800.558.8722
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA MODEL
XXXX
P/N
#####
SERIES
##X ##X
/