IXS-HBDV

Aiphone IXS-HBDV Operating instructions

  • Hello! I've analyzed the provided document which is an instruction manual for the Aiphone IXS-HBDV system. This system includes the IX-DV door station, IX-MV7-HB master station, and accessories, and the document details the setup process and optional expansions. I'm ready to answer any questions you might have about the devices or their configuration.
  • What is included in the IXS-HBDV box set?
    Where can I find the system’s configuration file?
    What do the blue lights on IX-DV and IX-MV7-HB indicate?
IX Series - IXS-HBDV Instructions
10/22
Aiphone Corporation
www.aiphone.com
(800) 692-0200
Watch video 1 to import the conguration le onto your PC.
Watch video 2 to change date and time settings.
Note: The videos and conguration le referenced below are found on the supplied USB drive.
Step 5
Step 6
Watch video 3 to add more door stations to the system.
Watch video 4 to add more master stations to the system.
Watch video 5 to add an IXW-MA network relay to the system.
Step 7
Step 8
Step 9
Step 1
Step 2
Step 3
Step 4
Unpack contents. Store the USB drive in a safe place as it contains the system’s conguration le and “how-to” videos.
Plug the PoE switch into a 110V AC outlet.
Connect IX-DV and IX-MV7-HB to the PoE switch using Cat-5e/6 cable (not provided).
It does not matter which port you plug them into.
Wait for a solid blue light on the IX-DV and IX-MV7-HB to indicate that the stations have properly powered up.
This should take approximately 1 minute.
IXS-HBDV
Preprogrammed IX Box Set
GENERAL OVERVIEW
The IXS-HBDV is a preprogrammed box set including one IX-DV, one IX-MV7-HB, one PoE switch, and a USB
drive. The USB drive includes the conguration le and instructional videos on how to add components, which are
outlined below, to the system.
Contents
IX-DV
Getting Started
Optional Steps (Recommended)
IX-DV IX-MV7-HB PoE Switch
USB Drive
USB Contents
• IX Series Kit Conguration
• Video 1 - Import IX Series Configuration File
• Video 2 - Date and Time
• Video 3 - Adding a Door Station
• Video 4 - Adding a Master Station
• Video 5 - Adding an IXW-MA
Optional Steps
/