VISUAL COMFORT AH 3127 User manual

Penelope Table Lamp

Item # AH 3127

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Thread shade riser (C) to the top of cluster (E).

3. Remove finial (A) from shade riser (C).

4. Remove shade (B) from packaging and install to shade riser (C) using

finial (A).

NOTE: If shade has additional packaging, carefully cut off from

interior of shade to avoid damages.

5. Install light bulbs into the sockets.

6. Remove protective cover (D) from plug.

7. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents.

NOTICE:

Bulbs not included

B (Packaged separately)

TOOLS REQUIRED (NOT INCLUDED):

Scissors