Cat Scratcher Box Christmas Tree
Contents
A. Bottom paper x
1 pc
B. Print
paper(trapezoid) x
2pcs
C. Middle paper x 1pc
D. Print paper(triangle)
x 2 pcs
E. Connector x 4
pcs
F. Star x 1 pc
H. Paper
Scratcher(short) x 2pcs
G. Paper
Scratcher(long) x 2pcs
Assembly Instructions
Step 1.
Connect the bottom paper A to the trapezoidal paper (B x 2 pcs) as below image.
Step 2.
Connect two pieces of trapezoidal board (B x 2pcs) with buckle. Stabilise the bottom four
edges with connector (E x 4pcs) as below image. Please fasten them firmly.
Step 3.
Fold the middle board C around the crease line, then connect the middle board C to the
assembled first layer (Step 1). See below image.
Step 4.
Fold the triangular board (D x 2pcs) buckle and stand it up as below. Insert the triangle board (D
x 2pcs) buckle into the middle board C.Then flatten the buckles to the sides, please refer to the
image below.
Step 5.
Connect two pieces of triangular board (D x 2pcs) with buckle, put the scratcher (G x 2pcs) on
the bottom paper A and put the scratcher (H x 2pcs) on the bottom paper C. Insert the star F
into the hole. See below image.
WARNING: Pet toy – Not intended for children.
It is the responsibility of the pet owner if this toy is suitable for their pet's style of play.
No pet toy is indestructible and can be damaged during play.
For your pet’s safety, inspect regularly and remove if damaged.
Always supervise your pet during play.
-
1
-
2
-
3
-
4
