2. Global Industrial
  3. 168111
168111

Global Industrial 168111 User manual

  • Hello! I have analyzed the instruction manual for the GLOBAL Portable Flexible & Expandable Conveyor models 168110, 168111, 168112, and 168113. These conveyors offer features like adjustable height, expandable length, and a box stop. I'm ready to answer any questions you have about their assembly, safety precautions, or specifications.
  • What is the maximum load capacity per foot?
    What is the minimum and maximum length the conveyor can extend to?
    What are the minimum and maximum heights of the conveyor?
Customer Service
1-800-645-2986
Instruction
Manual
• Do not put hands on scissor supports.
It is the responsibility of the assembler/user to completely read and understand all instructions and safety information
before proceeding with assembly. Following these instructions will ensure proper function and safety.
SAFETY INFORMATION
DANGER
WARNING
CAUTION
Model 168110 18" x 7.2'-22.6' Nylon Wheel
Model 168111 24" x 7.2'-22.6' Nylon Wheel
Model 168112 18" x 7.2'-22.6' Steel Wheel
Model 168113 24" x 7.2'-22.6' Steel Wheel
• Do not overload. Maximum capacity: 175 lb per foot.
• Keep the casters breaks down while in use.
• Do not stand up on top of the unit.
• Conveyor is not a toy. Not for use by children.
• This product contains chemicals which are known by
the state of California to cause cancer, birth defects
or other reproductive harm.
• Conveyor is very heavy. Assembly requires more
than two people to prevent injury.
• Clean the conveyor regularly to maintain the lifespan.
1
globalindustrial.com
Portable Flexible
& Expandable Conveyor
Instruction Manual1-800-645-2986 Portable Flexible
& Expandable Conveyor
Wheel Effective Overall Retracted Extended Lowest Highest Load Cap.
Model Material Width in. Width in. Length ft. Length ft. Height in. Height in. lb./ft.2
--- w W l L h H ---
168110 Nylon 18 23.6 7.2 22.6 27.6 39.4 175
168111 Nylon 24 29.5 7.2 22.6 27.6 39.4 175
168112 Steel 18 23.6 7.2 22.6 27.6 39.4 175
168113 Steel 24 29.5 7.2 22.6 27.6 39.4 175
SPECIFICATIONS
Component
Model Model No. Description
168110 330CP118 18" Nylon Skate Wheel Expandable Conveyor (Body only)
330CP122 18" Expandable Conveyor Leg Kit
168111 330CP119 24" Nylon Skate Wheel Expandable Conveyor (Body only)
330CP123 24" Expandable Conveyor Leg Kit
168112 330CP120 18" Nylon Skate Wheel Expandable Conveyor (Body only)
330CP122 18" Expandable Conveyor Leg Kit
168113 330CP121 24" Nylon Skate Wheel Expandable Conveyor (Body only)
330CP123 24" Expandable Conveyor Leg Kit
COMPONENTS
2
Component Content Key Quantity
Skate Wheel Body Conveyor body 1 1
Leg support 2 7
Swivel caster with brake 3 8
Swivel caster without brake 4 6
Skate Wheel Leg Box stop/Handle 5 1
Hex Key H1 1
Leg knob H2 14
Box Wrench H3 1
COMPONENTS CONTENT
W
H
L
l
h
w
Instruction Manual1-800-645-2986 Portable Flexible
& Expandable Conveyor
Conveyor is very heavy. Assembly requires
more than two people to prevent injury.
Lay conveyor body (1) upside down on a level surface.
Loosen all set screws with hex key (H1) provided.
Insert leg supports (2)
into sockets making sure
threaded bosses are
facing same direction.
3
CAUTION
1
2
Threaded
Boss
Threaded Boss
Set
Screw
H1
1
22
Instruction Manual1-800-645-2986 Portable Flexible
& Expandable Conveyor
4
Retighten all set screws
with hex key (H1) provided.
3
Insert caster leg assemblies
(3 & 4) into leg supports.
4
34
3
3
3
4
44
H1
With
Brake
Without
Brake
Instruction Manual1-800-645-2986 Portable Flexible
& Expandable Conveyor
5
Insert and tighten all knobs
(H2) into caster posts.
5
To install box stop loosen and remove hex
nuts (H5), washers (H4) and axle rod (6).
6
H2
H3 H5 H4 6
6
H4 H5
Instruction Manual1-800-645-2986 Portable Flexible
& Expandable Conveyor
6
STEP 1 STEP 2 STEP 3
globalindustrial.com
Attach box stop handle (5) to end of conveyor. Insert axle rod (6). Replace
washers (H4) and retighten nuts (H5) with box wrench provided (H3).
7
To use the handle (5) as a box stop, lift the
horizontal bar and hook it to the top rod.
8
Set pitch and height as required by
adjusting caster legs up or down.
9
Tightening
Loosening
H5
H4
6
5
5
6
5
H3
H5 H4
/