INSTRUCTIONS
ELECTRIC HEATED INSOLES
HEATTECH
PACKAGE CONTENTS
• Insoles
• USB charging cable
TECHNICAL SPECIFICATIONS
• Rated voltage: 5 V DC
• Rated current: 2 A
• Size: 35–44
• Temperature: 40–50 °C
• Material: EVA fiber
COMPONENTS
1. USB charging cable
2. Insole power connector
3. Insole
HOW TO USE
• To use the insoles, you first have to adapt them to
your size.
• Cut the insole at the tip according to the markings on
the fabric.
• Insert them into your shoes or slippers.
• Make sure that the power connector is on the
outside of your footwear.
• Connect the USB charging cable to the insole
connectors. There is a connector on the USB cable
for each of the insoles.
• Plug the USB cable into a power bank or a computer
or charger. If you are using a stationary power
source, make sure that you do not move while the
insoles are connected to power.
• The insoles will start heating automatically when
connected to power. They will stop heating when the
power is disconnected.
MAINTENANCE
• You can wash the insoles with water and soap, but
make sure that they are NOT connected to power.
WARNINGS
• Disconnect from power when not in use.
• Only use with suitable power sources.
• Do not use when doing sports, due to the risk of
overheating.
• Not suitable for children and elderly persons.
• Do not let the device heat for longer periods of
time.
• If you feel a burning sensation, stop using
immediately.
WARRANTY
The warranty is valid for 24 months. You can claim it
from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš,
Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in the
email, which is available by clicking on our logo in the
bottom right corner. The product has a lifetime of 24
months from the date of collection.
WEEE disposal and recycling symbol.
The WEEE symbol is attached to the
product in compliance with the EU
directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE). It is intended to deter the
improper disposal of this product and
to promote reuse and recycling.
