ZKTeco ZK-D300 User manual

Brand: ZKTeco

Model: ZK-D300

Type: User manual

ZKTeco ZK-D300 is a handheld metal detector with high sensitivity and four sensitivity levels. It features sound and light alarm with three alarm modes: vibration, sound, and vibration and sound. The device is easy to use and carry, powered by two AA batteries, and has a long battery life of 70 hours of continuous operation. It has an illuminated keypad for easy operation in low-light conditions, and automatically goes into sleep mode after 2 minutes of inactivity and shuts down after 10 minutes of inactivity.

1.Diagram 2. Keys and Operation Instructions

1. Indicator (alar ery

2. Volume hole

3. Key combination

4. Handle

5. USB port

6. Battery cover

7. Detection area

8. Battery cover screw

9. Hole for hanging rope

LowSensitivity

MiddleSensitivity HighSensitivity

Power Key

Key to switch between Sound & Vibration

Power Key: Long press to power on, and in working state long

press it to power oﬀ. The power indicator ﬂashes once in every

3 seconds in working state.

Sound & Vibration key: Press this key to switch between

“Sound” >“ Vibration” >“ Sound and Vibration” mode. When the

indicator doesn’t ﬂashes, it indicates sound and light alarm

mode. When it ﬂashes once in every 3 seconds, it indicates the

vibration and light alarm mode. When it ﬂashes once every 1.5

seconds, i ti ndicates t he s ound, v ibration a nd l ight a larm m ode.

Sensitivity Key: The sensitivity is divided into 4 levels; low,

medium, high, and super high. Select low, medium or high

sensitivity by pressing the corresponding sensitivity key, the

corresponding indicator ﬂashes once in every 3 seconds. To

switch to super high sensitivity, select a sensitivity, and press

the s ensitivity k ey a gain. T hree s ensitivity i ndicators w on’t ﬂ ash.

This detector has illuminated keys, which indicates its working

state.

-1- -2-

4.IndicatorInstructions

Alarm indicator: Divided into 4 intensity levels, the larger or

closer the metal is during detection, the higher the alarm level.

Level 1 Level 2 Level 3 Level 4

Low Battery Indicator: The leftmost light ﬂashes quickly when

the power is low.

3.Features

-3-

6. Uses AA battery type which is easily available. 70 hours of

continuous . (Pay attention to the positive and

negative poles while installing the battery)

4. Sound and light alar .

7. In standby state for more than 2 minutes, it will sleep automati-

cally, and in case of more than 10 minutes of inactivity, it will

shut down. Press any button or take it close to any metal to

activate it.

5. T hree alarm modes: V ibration, Sound, vibration and sound.

1. Digital design and strong anti-interference ability.

2. Easy to use and carry.

3. High sensitivity, Four sensitivity levels.

operation

m, low batt )

5.Main Parameters

Phone : +86 769 - 82109991

Fax : +86 755 - 89602394

www.zkteco.com

-4-

UserManual

Hand Held Metal Detector

ZK-D300

Version: 2.1

Date: November 2021

Size: 360x82.5x42.5mm Weight: 270g

Power Supply: Two AA batteries.

Power Consumption: <60mW

Material: The cover is mainly ABS and rubber.

Operating Temperature: -1 0°C ~ +40°C (Relative Humidity:

5 ~ 95%) 

FCC Caution:

Any Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

No.32,Pingshan Industrial Avenue,Tangxia Town,

Dongguan City,Guangdong Province,China 523728

ZKTeco ZK-D300 User manual

ZKTeco ZK-D300 User manual

ZKTeco ZK-D300 User manual

Other documents