ageLOC LumiSpa User guide

Brand: ageLOC

Model: LumiSpa

Type: User guide

ageLOC LumiSpa is an advanced skincare device that combines cleansing and anti-aging benefits. It uses a unique oscillating and rotating action to gently remove impurities, makeup, and excess oil, while also delivering skincare ingredients deep into the skin. With its two interchangeable treatment heads, ageLOC LumiSpa can be customized to suit different skin types and concerns. The device also features a built-in timer to ensure a consistent cleansing experience every time.

STEP-BY-STEP

GUIDE

HOW TO PAIR NU SKINVERA® TO AGELOC® LUMISPA® IO?

Yo u a r e R e a d y t o P a i r !

•Launch VERA -> tap DEVICES - > Let’s Get Started - >

Double tap

•ageLOC® LumiSpa® iO power button to turn the device on ->

tap CONNECT -> Tap your ageLOC® LumiSpa® iO –XXXX

•Device will initiate pairing -> If pairing succeeds, the success

screen will appear

•You may rename your device under Device Settings

Turn on phone Bluetooth and Location

(for Android Version 11 & Below)

Go to Phone Setting -> Apps (look for VERA) ->

Location Permission – ALLOWED

(for Android Version 11 & Below)

NON-SUCCESS PAIRING SCENARIO

•If the device is not found

•Ensure phone has

Bluetooth turned on

•Soft reset your ageLOC®

LumiSpa® iO by placing

the device on the charger

and pressing the power

button & hold for 5

seconds until you see

flashing blue light

•Ta p R e f r e s h

NON-SUCCESS PAIRING SCENARIO

•If pairing fails, the failure

screen will appear

•Soft reset your ageLOC®

LumiSpa® iO by placing

the device on the charger

and pressing the power

button & hold for 5

seconds until you see

flashing blue light

•Forget device from

your phones Bluetooth

settings

•Try to pair again

UPDATE FIRMWARE

•After initially pairing a device, the app will

prompt you to update immediately before

you can use the device

•While updating, the lights breathe

•After pairing if a firmware update is

needed it can be seen in the device details

and device settings

•Firmware version is also located in the

device settings

UPDATE FIRMWARE

Before Updating

•Make sure ageLOC® LumiSpa® iO is

connected to the charger

•If you are not on the charger the app will

notify and prompt you to do so

•Keep the phone and ageLOC® LumiSpa®

iO close

•Don’t close the app during the update

UPDATE FIRMWARE (FAILED)

1. Open Vera > Devices > Pair New Device > Let’s Get Started > Connect

2. Tap on “LumiSpa” (there will be no 4-digit number following LumiSpa)

3. Vera will display “Preparing Device” screen; wait for this screen to complete

4. Once “Prepping Device” has finished, “Select Your Device” screen will appear

5. Your LumiSpa should appear in the device list; tap on your LumiSpa

6. Reinitiate pairing; device will already have up to date firmware

When ageLOC® LumiSpa® iO fails to update, the device will become stuck in a rippling LED pattern and

appear unresponsive.

1. Name your treatment

2. Choose Tr e a t m e n t H e a d

3. Ta p Add Attachment To Treatment

4. Ta p Add treatment areas

5. Choose from area drop-down list, give the area

a custom name and adjust desired treatment duration

6. Ta p Save

7. Ta p Update Preset to save the customized treatment

to the ageLOC® LumiSpa® iO

Ta p Explore Treatments/Device Treatment ->

Create New Treatments

HOW TO CREATE &

SAVE CUSTOMIZED TREATMENTS

You can find your saved treatments in

Device Treatments

SAVING TREATMENTS

TO DEVICE

Once you have saved treatments

to your device, toggle through

custom treatments by double

pressing the power button

Once you have toggled to the

desired saved treatment, quick

press the power button to start

the treatment

YOU MAY TOGGLE THE SAVED TREATMENTS

FROM THE AGELOC® LUMISPA® IO DEVICE

WITHOUT THE APPS

1. Select the pencil icon

2. Choose the Saved Treatment that you wish to delete

3. Ta p t h e Red icon to delete

4. Ta p Update Preset to ensure the deleted treatment is

removed from the ageLOC® LumiSpa® iO

Ta p Explore Treatments/Device Treatment

HOW TO DELETE A SAVED TREATMENT

FROM AGELOC® LUMISPA® IO?

1. Choose the Saved Treatment that you wish to delete

2. Ta p t h e Red icon to delete

WITHOUT PAIRING TO ANY ageLOC® LUMISPA® iO DEVICE

Ta p Explore Treatments

HOW TO COMPLETELY DELETE

ALL CREATED TREATMENTS FROM

NU SKIN VERA®?

HOW TO

Connect ageLOC® LumiSpa® iO to charger and

press power button for 10s to conduct a Hard Reset

(light will change from blue to orange)

1. One phone can connect to multiple devices

2. One device can only connect to One phone at a time

3. If you would like to pass your device to another person,

kindly conduct Hard Reset

Please note

LEDs light green

LOW BATTERY

CRITICALLY

LOW BATTERY FULLY CHARGED

•Charge time can vary device to device

•Charge time is at least 10 hours (until lights turn green)

ageLOC LumiSpa User guide

ageLOC LumiSpa User guide

Related papers

Other documents